FACELIFT/ UPLIFTMENT TO THE SINGLE OFFICERS ACCN INCLUDING VIP GUEST ROOM AND CERTAIN OTHER BUILDING IN DOMESTIC AREA AT AF STATION YELAHANKA

Amount

Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description all as directed.

All as per item No 1 above but exceeding 1.5 sqm but not exceeding 4 sqm all as directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm, all as specified and directed.

Taking down shutters of any description n exc 1 Sqm all as specified and directed.

M&L Cutting holes in brick/stone walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 Type B 0 ( using 12.5 mm graded stone aggregate) ¸depth of embedded portion of hold fast not exceeding half brick complete all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including necessary fittings etc complete as specified and directed.

S&F powder coated anodised aluminium frame and shutters with all fixing arrangements for doors, windows and ventilators with one or more rebates including jointing cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed.

S&F powder coated Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and rollers complete all as specified and directed. Note : Powder coating shall not be less than 50 microns.

S&F powder coated Anodised Aluminium Door shutters, aluminium section weight 0.55kg/mtr including necessary joining cleats, glazing clips rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified Note : Powder coating shall not be less than 50 microns.

S & F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) Size 100mm x 65 mm Single Rebated ,made from wpc material comprising of virgin PVC polymer of K value 58-60 (suspension grade ) calcium carbonate and natural fibers ( wood powder/rice husk /wheat husk) minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in position with SS dash fasteners / hold fast of required dia and length, colour of door frame to match that of shutter complete all as specified and directed. MAKE:- BLACK COBRA/SMP Impex/Sintex

Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) Size 125mm x 65 mm Single Rebated ,made from wpc material comprising of virgin PVC polymer of K value 58-60 (suspension grade ) calcium carbonate and natural fibres ( wood powder/rice husk /wheat husk) minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in position with SS dash fasteners / hold fast of required dia and length, colour of door frame to match that of shutter complete all as specified and directed. MAKE:- BLACK COBRA /SMP Impex/Sintex

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category withproperty of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately MAKE:- BLACK COBRA/SMP Impex/Sintex

M&L for 35mm thick Factory made solid WPC (Wood plastic composite) WIRE MESH door shutter with S.S wire mesh in any number of division with brown wood grain texture, including stainless steel wire mesh shall be fixed with 15x15 square tube in side rails with screwing 8x28 heat metal zinc coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be 650 or as per manufacture instruction complete all as specified and complete all as specified and directed. MAKE:- BLACK COBRA/SMP Impex/Sintex Note. Material test certificate and authentication should be compulsory provided by the manufacturing company.

M&L for Factory made WPC Single extruded board of 18mm thick pre laminated shutter for kitchen cabinets, Cupboard, and the pre laminated side with different density and other side plain with of density not less than 600kg/ cum. the 18mm board should be 100% lead free water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified cupboard cabinet and including Necessary fittings like Hinges, handle and hanging rod and locking arrangement etc all as specified and directed Make : Sintex, black cobra/SMP Impex

S&F in repairs 12mm thick Plywood grade BWP, type BB fixed with Screw or timber frame work all as specified and as directed

S&F Continuous(piano) hinges, mild steel, bright finish of electrogalvanized 30 mm width of flap all as specified and directed

S&F 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F 35mm thick second class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) and fitted to chowkats complete all as specified and directed

M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolts of extruded section all as specified and directed

S&F for aluminium anodised, barrel tower bolt 200mm long of extruded section all as specified and directed

S&F for aluminium handle 150mm cast type anodised all as specified and directed

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete glazed with oil putty or fixed with beads all as specified and directed

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n exc 0.50 Sqm in each pane all as directed

S&F figured glass pin head type ordinary quality 4mm thick and glazing with oil putty in square n exc 0.50 Sqm in each pane S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n exc 0.50 Sqm in each pane all as directed

S&F sheet glass ordinary quality 5.5mm thick as in window, showcase aluminium frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprene gasket all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed.

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed.

S & F mild steel framed work as grills conforming to Fe 290 Gde E-165 all as specified and directed.

M&L for preparing new steel surfaces of any description and applying two coats of Synthetic Enamel Paint over one coat of red oxide zinc chrome all as specified and directed.

S&F in repairs Decorative wooden finished curtain rod mild steel chromium plated of 20 mm dia all as specified and directed.

S&F decorative wooden finished type chromium plated double brackets supports for holding curtain rods and corners to be fixed to ends of curtain with SS screws complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 & 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

M&L Vitrified tiles of light shade 8 to 10mm thick and area of each tiles not exceeding 0.36 Sqm, For flooring laid with spacer and joints grouted with epoxy filling material over and including 15 mm thick screed bed in CM 1:6 all as specified and directed.

M&L Vitrified tiles of light shade 10mm thick and area of each tiles exceeding 0.42 but not exc 1.00 Sqm, For flooring laid with spacer and joints grouted with epoxy filling material over and including 15 mm thick screed bed in CM 1:6 all as specified and directed.

M&L for double charged Vitrified Ceramic tiles light shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36Sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 all as specified.

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles exceeding 0.11 sqm and not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

M&L Glazed coloured Ceramic tiles of size 450X300X7/600x300/7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over and including 10 mm thick plaster in CM 1:4 finished complete all as specified and directed.

M&L Glazed coloured Ceramic tiles of size 300x600x10mm thick mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over and including 10 mm thick plaster in CM 1:4 finished complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over and including 20mm thick screed bed in CM 1:6 all as specified and directed.

Demolition of brick work or stone masonry built in CM including all quions all as specified and directed.

Taking down cement plaster from walls of any description all as specified and directed.

M/L for precast cement concrete type B1 1:2:4 (20 mm graded stone aggregate) block masonry with solid blocks exc 10cm in width and setting in CM 1:6 all as specified and directed.

M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall all as specified and directed.

M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls all as specified and directed.

M&L for applying two coats of distemper (OBD) including Preparation to the new surfaces of wall, all as specified and as directed

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint on walls including priming surfaces with alkali resistant priming paint etc complete all as specified and directed.

Taking up or down 15mm steel tubing and connections all as specified and directed.

S&F 20 mm dia of CPVC pipes SDR 11 with fittings on walls / ceiling or laying in floors complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed. Make : Cera/ Parryware/Neycer

S&F in repairs for vitreous china Under Counter sunk Modular wash basin white flat back size 190X550X430mm including fixing of 32mm low density polyethene pipes (LDPE)of pressure rating 6kg/cm2,coupling all as specified and directed. Make: Jaquar/Cera/Kohler

S&F plastic pedestal pattern seat cover with flat bottom and cover and MS chromium plated hanging type device all as specified and directed. Make : Cera/Parryware/Neycer

Supply and Fixing in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe fixed in repair all as specified and as directed. Make : Cera/Parryware/Neycer

Supply and Fixing in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with pedestal including brackets all as specified and as directed Make : Cera/Parryware/Neycer

Supply only Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” with long screwed shanks fly nuts ,screwed for iron pipe and fixed completed all as specified and directed. Make : FLR-CHR-5167NB of make "JAQUAR" or equivalent in Cera/Kohler

S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified. Make : FVR-CHR-29037 of Make "JAQUAR" or equivalent in Cera/Kohler

S&F in repairs Stop valve 15mm dia, concealed type chromium plate fancy type with long shank and cup complete all as specified and directed. Make : Cera/Jaquar/Ess Ess.

S&F in repair 15 mm dia two-way bib taps (fancy type), cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed Make : Cera Model F2002161 or equivalent in Cera/Kohler

S&F in repair 15mm dia angle valves, cast copper alloy, CP, screwed down, high pressure, with crutch, screwed both ends for iron pipe or for unions all as specified and directed. Make : ARI-CHR-39053 of make "JAQUAR" or equivalent in Cera/Kohler.

S&F for PTMT Waste coupling 40mm dia complete all as specified and directed.

Supply and Fixing in repairs PVC connection pipe 15mm size with PTMT Nut of length 600mm complete all as specified and as directed

S&F of 32mm waste pipe for wash hand basin all as specified and as directed

S & F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed. Make : Cera/Jaguar/Ess Ess.

S&F in repairs CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats Make : Cera/Jaguar/Ess Ess

S&F in repairs of CP health faucet of Cera make including necessary holding arrangements with screws etc all as specified and directed. Make : Cera Make-F-8030103 or equivalent in Jaquar/Kohler

S&F in repairs corner Glass shelf of cera make including necessary holding arrangements with screws etc all as specified and directed Make : Cera Model F-5005102 or equivalent in Jaquar/Kohler

S&F PVC floor trap 110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified and directed.

S&F in repairs PVC (SWR) Pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors or wall all as specified and directed.

S&F in repairs PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors or wall all as specified and directed.

S & F PVC (SWR) bends 75 mm dia in any radius all as specified and directed.

S & F PVC (SWR) bends 110 mm dia in any radius all as specified and directed.

S&F in repairs CP grating size 100mm all as specified and directed.

S&F 01 mm thick Kitchen or laboratory sinks made of stainless steel with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as approved by Engr-in-Charge. Make : Nirali/ Blue star/Diamond)

M&L for preparation of old decorated surface by complete removal of existing treatment and applying one coat of texture paint of approved shade over one coat of primer over one coat of wall birla putty complete all as specified and directed.

Supply and Fix wall mounted cloth drying hangar of 4.5 feet length consisting of four anodized aluminium pipe of drying rod all as specified and directed. Make: Mount-it 18 of Easy dry or equivalent

Supply and Fix for Pulley operated clothes drying system, 4 nos of pipe, 8 Feet Length consisting of anodized aluminium pipes, each of outer dia 22 mm and inner dia 19.8mm. pulleys made up of Delrin with rope guide mounted on channel pair of length 24" and locking system to hide rope knot. rope will be polyester braided undyed of 4mm dia complete all as specified and directed Make :- Pull it 8 Feet (4 Pipe) of Easy dry or equivalent

S&F in repairs Single Piece WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 360x640x685 mm, S Trap- 110 mm complete all as specified and directed Make : JaquarSLS-WHT-6851S110PP or Equivalents

S& F in repair Brass chromium plated shower rose Maze Overhead Shower 200mm Round Shape Single Flow (Body & Face Plate Stainless Steel) with rubit Cleaning System including fixing to steel pipe or union of 15mm bore all as specified and directed at site. Make : Jaquar OHS-GRF-1613 or Equivalents in Cera/Kohler

S& F in repair Brass chromium plated hand shower 120mm dia round Shape Multi Flow with Cascade Effect (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System union of 15mm bore all as specified and directed. Make : Jaquar HSH-CHR-1731 or equivalent in Kohler/Cera

Supply and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, with design etching as specified by The Engr-in-Charge, including fixing to top & bottom pivot & floor spring type fixing arrangement and making necessary holes etc. , all complete as per direction of Engineer-in-charge . Make Modi/Saint gobin/Atul

S/F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed Make : Universal/Everlite/Dyna

Providing and fixing Stainless steel door handle 300mm long and 20mm dia including necessary fixing arrangement, all complete all as specified and directed.

Material and labour for stainless steel(Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature(where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

M & L for tensile fabric of 900b/sqm anti moulded double side UV Protected glossy finish and tensile breaking strength of warp and 3000N/5CM and tear strength of wept 500N, Adhesion as per manufacture instruction and edges are fitted with aluminium strip of size 25mm wide, 3mm thick complete all as specified and directed.

S&F mild steel work in tubular trusses including special shaped washer etc complete or butt-welded tubes conforming to IS-1161-1979 graded St-240 all as specified and directed.

Dismantling of old Ceiling boards (Fibre, pulp, insulation, etc) or insulation boards /slabs blankets, including cover fillets and frame work all as directed.

Supply and fix at site of the TRAY PANEL SCREW type system with aluminium composite panel of approved plain colour or wood grain printed on interior walls, columns, MS structure , ceiling, coping, slab projections at all heights and elevation including necessary aluminium framework. The aluminium composite panel should 4 mm thick consist of 3 mm thick thermoplastic core of anti toxicant LDPE sandwiched between 2 skins of 0.50mm thick aluminium shall be finished with PVDF based coating on the top side and service coating on the reserve side shall be with a polymer paint complete all as specified and directed. (Note :- The system shall be fitted with necessary aluminium, sub frames, cleats and shall be fixed to the masonry/RC walls / MS structure with necessary clamps, galvanized M.S brackets and anchor fasteners. All clamps and brackets shall be Hot dip galvanized minimum 80 microns thick and shall conform to IS : 4759-1996. Any other accessories such as fastening straps, nuts, bolts, rivets, washers, etc, other than anchor system shall be in Indian standard grade all joints of ACP must be sealed with approved sealant of approved colour. sealant make DOW CORNING 789 weather sealant. Rate shall be include to provide open cell polyethylene backer rods, weather sealant, scaffolding upto 25 feet height, necessary safety precaution etc, all materials and labour complete.

SRUSHTI CONSTRUCTIONS (BID ID -3170717)

VP DEVELOPERS AND CONTRACTOR (BID ID -3171286)

MSA Constructions (BID ID -3170764)