Loading…
Loading…
Tender Value
₹10.1 L
EMD Value
₹20,217
Closing Date
29 Jun 2026, 3:00 pmDue tomorrow
Similar tender results from the same govt authority in the past 3 years.
S C Engg HQ NSG
Engg Dte HQ NSG Palam Delhi 110037
Repair and maintenance of all types motor pumps borewell installed at HQrs NSG Palam Samalkha R K Puram IGI Sudarshan New Delhi during 2026 27
2026_NSG_913732_1
03/SC(Engg)/NSG/2026-27
Open Tender
Electrical Works
365 days
NSG Camp Palam Samalkha Sudarshan Delhi
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹20,217
18 Jun 2026
18 Jun 2026
30 Jun 2026
18 Jun 2026
29 Jun 2026
19 Jun 2026
19 Jun 2026 - 29 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Repair/ Rewinding of 3.0 HP, 3 Phase, 415 Volts AC Submersible Sewerage Motor Pump with required size PVC insulated/super enameled copper winding wire and other insulating materials, Upper and Lower oil seal, Insulating oil etc as required. rates are including cartage charge carry upto workshop and bring back to site . (Retrieved material will be retained by the agency) | 3 | Each | 11,740 | ₹35,220 |
| 2 | Repairing of pump of 3 HP Submersible Swerage Motor Pump including changing of Bearing, repairing of shaft & impeller i/c dismantling and reassembling pump with the motor etc as required ( Retrieved material will be retained by the agency ) | 3 | Each | 8,455 | ₹25,365 |
| 3 | Repair/ Rewinding of 5.0/5.5 HP, 3 Phase, 415 Volts AC Submersible Sewerage Motor Pump with required size PVC insulated/super enameled copper winding wire and other insulating materials, Upper and Lower oil seal, Insulating oil etc as required. rates are including cartage charge carry upto workshop and bring back to site . (Retrieved material will be retained by the agency) . (Retrieved material will be retained by the agency) | 3 | Each | 13,898 | ₹41,694 |
| 4 | Repairing of pump of 5.0/5.5 HP Submersible Swerage Motor Pump including including changing of Bearing, repairing of shaft & impeller i/c dismantling and reassembling pump with the motor etc as required ( Retrieved material will be retained by the agency ) | 3 | Each | 9,650 | ₹28,950 |
| 5 | Lifting/ dismantling of existing submersible Sewerage pump set or submersible water pump set complete from the sewerage collection tank or 100mm to 200 bore well with the help of chain pulley/hydra, suitable T & P and labour including dismantling of the GI/MS pipes, electrical cables etc as required at site | 5 | Job | 7,025 | ₹35,125 |
| 6 | Lowering/ Installation of existing submersible Sewerage pump set or submersible water pump set complete in the sewerage collection tank or 100mm to 200 bore well with the help of chain pulley/hydra, suitable T & P and labour including stacking of the GI/MS pipes, providing and fixing suitable size nut bolts and gasket etc, making connection with electrical cables, testing and commissioning etc as required at site | 5 | Job | 7,337 | ₹36,685 |
| 7 | Supplying Installation ,Testing and Commissioning of Three phase Submersible Pump Controllers ( With Single Phase Preventer) Relay Range 13-21 Amp i/c connection with water supply line and power supply etx as required. Make L&T Model MU-G10 / Havells | 2 | Each | 11,391 | ₹22,782 |
| 8 | Supplying, Installation, Testing and Commissioning of Three phase Submersible Pump Controllers ( With Single Phase Preventer) Relay Range 6-10 Amp i/c connection with water supply line and power supply etx as required. Make L&T Model MU-G6 / Havells | 1 | Each | 9,608 | ₹9,608 |
| 9 | Supplying Installation,Testing and Commissioning of single phase Submersible Pump Controller Panel, Relay Range 12-20 Amp i/c connection with power supply etx as required. Make L&T Model MF-G1 / Havells | 1 | Each | 5,046 | ₹5,046 |
| 10 | Flushing/ cleaning of the bore well of size 100 mm to 200 mm upto 300 feet deep with the help of air compressor with minimum presser 7 kg per square centimeter . | 10 | Hrs | 3,000 | ₹30,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
nit03pump.pdf
Tender Documents • 0.85 MB
BOQ_960251.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid