Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.8 LAccepted-AOC | L1 | Accepted-AOC Accepted due to lowest bidder | |
| 2 | L2₹19.5 L+₹14,863 (0.77%)Rejected-Finance | L2 | Rejected-Finance Not accepted | |
| 3 | L3₹20.9 L+₹1.6 L (8.27%)Rejected-Finance A 63 ELDECO COUNTY PHASE II RAJGARH JHANSI U P 284135 | JHANSI | JHANSI | UTTAR PRADESH | 284135 | L3 | Rejected-Finance Not accepted | |
| 4 | L4₹24.2 L+₹4.9 L (25.6%)Rejected-Finance | L4 | Rejected-Finance Not accepted | |
| 5 | L5₹25.5 L+₹6.2 L (32.2%)Rejected-Finance | L5 | Rejected-Finance Not accepted |
Tender Value
₹29.5 L
EMD Value
₹58,920
Closing Date
4 Oct 2019, 6:00 pmClosed
Shri MK Marothia, IDSE
Garrison Engineer Jhansi
REPAIR / MAINT, RE-CANNING AND POLISHING OF VARIOUS WOODEN FURNITURE ITEMS UNDER BSO SUB DIVN AT GE JHANSI
2019_MES_280044_1
GE/JHA/TOK/41 OF 2019-20
Open Tender
Civil Works
Item Rate
180 days
GE Jhansi
Please refer tender documents
6 documents required · 6 mandatory
₹500
Yes
GE Jhansi
₹58,920
Yes
8 Jan 2020
5 Sept 2019
7 Oct 2019
5 Sept 2019
4 Oct 2019
19 Sept 2019
Amount
Recanning of all type chairs :- M&L for recanning of chairs and other furniture with white, half round plastic cane, 2 mm wide and 0.3 mm thick, weaving shall be done as per Godrej Pattern (Plastic cane shall be of Make: as approved by GE/Engineer-in-charge) complete all as specified in drawing and directed. Note - Chair dinning 0.39x0.39=0.1521, Chair writtiing-0.43x0.47=0.2021,Chair easy seat-0.51x0.44=0.2244 & back-0.41x0.32=0.1321
Minor repairing of various type of wooden chair including tightening of frame with bamboo pins and fevicol complete all as shown in drawing and as directed by GE/Engineer-in-charge.
M&L for polishing of chair dinning with high class french/ sprit polish till glossy finish is obtained complete all as specified in drawing and directed.
M&L for polishing of chair writting with high class french/ sprit polish till glossy finish is obtained complete all as specified in drawing and directed.
M&L for polishing of chair easy with high class french/ sprit polish till glossy finish is obtained complete all as specified in drawing and directed.
Table Dining 6 Pers
(a) Removing of old unserviceable top from table dining 6 pers and S&F new top of size 1500 x 900 mm of 18 mm thick of prelaminated particle board with 4 mm thick Ist class hard wood (teak wood) beading fixed with nails including french polishing to beading complete all as specified in drawingand directed.
(b) Removing of old broken/unserviceable side short rail of table dining 6 pers and S&F new side short/long rail made of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawing and directed.
(c) Removing of old broken/unserviceable side long rail of table dining 6 pers and S&F new side short/long rail made of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawing and directed.
(d) Removing old broken/unserviceable legs from table dining 6 pers and S&F new legs made of Ist class hard wood (teak wood) including 04 Nos PVC Shoes as per shape and size shown in drawing including french polishing to match other parts complete all as specified in drawing and directed.
(e) S&F wooden braket 8 Nos in each table dining between each corners fixing with suitable screws all as specified in drawings & directed .
(f) Preparation of surfaces of table dining 6 person by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
Table Peg (450 x 300 mm)
(a) Removing old unserviceable top from table peg and S&F new top of size 450 x 300 mm & 18 mm thick of prelaminated particle board with 4 mm thick Ist class hard wood (teak wood) beading fixed with nails as per shape and size shown in drawing including french polishing to beading complete all as specified in drawings & directed .
(b) Removing old broken/unserviceable side short rail of table peg and S&F new side short/long rail of Ist class hard wood(teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(c) Removing old broken/unserviceable side long rail of table peg and S&F new side short/long rail of Ist class hard wood(teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(d) Removing old broken/unserviceable legs of table peg and S&F new legs including 04 Nos PVC shoes of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(e) S&F wooden braket 8 Nos in each between each corners fixing with suitable screws complete all as specified in drawings & directed .
(f) Preparation of surfaces of Table peg by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
Teapoy (600 x 450 mm)
(a) Removing old unserviceable top from teapoy and S&F new top of size 600 x 450 mm of 18 mm thick of prelaminated particle board with 4 mm thick Ist class hard wood (teak wood) beading fixed with nails as per shape and size shown in drawing including french polishing to beading complete all as specified in drawings & directed .
(b) Removing old broken/unserviceable side short rail of teapoy and S&F new side short/long rail of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(c) Removing old broken/unserviceable side long rail of teapoy and S&F new side short/long rail of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(d) Removing old broken/unserviceable legs from teapoy and S&F new legs of Ist class hard wood (teak wood) including 04 nos PVC shoes as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(e) S&F wooden braket 8 Nos in each between each corners fixing with suitable screws complete all as specified in drawings & directed .
(f) Removing old broken/unserviceable centre stiffner from teapoy and S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(g) Removing old broken/unserviceable side stiffner from teapoy and S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(h) Preparation of surfaces of Teapoy by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
Table 3' x 2' with or without drawer
(a) Removing old unserviceable top from table and S&F new top of prelaminated particle board with 4 mm thick Ist class hard wood (teak wood) beading fixed with nails including french polishing to beading complete all as specified in drawings & directed .
(b) Removing old broken/unserviceable side short rail of table and S&F new side short rail of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(c) Removing old broken/unserviceable side long rail of table and S&F new side long rail of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(d) Removing old broken/unserviceable legs from table and S&F new legs of Ist class hard wood (teak wood) including 04 Nos PVC shoes as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(e) Removing old broken/unserviceable drawer from table and S&F new drawer as per sample, shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(f) S&F wooden braket 8 Nos in each between each corners fixing with suitable screws complete all as specified in drawings & directed .
(g) Removing old broken/unserviceable centre stiffner from and S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(h) Removing old broken/unserviceable side stiffner from and S&F new stiffner of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified in drawings & directed .
(j) Preparation of surfaces of Table 3'x2' with drawer by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
(k) Preparation of surfaces of Table 3'x2' w/o drawer by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
Sofa set 4/5 seater
(a) Removing of old cushion of size 21 x 22 inchs & 4 inchs thick from sofa set and replacing foam cushion of sofa set five seater with new PU foam cushion of 32 density (make: Sleepwell/Kurlon and cushion shall be covered with cotton tapesty cloth of range not less than Rs.350.00 per meter, colour, shade and quality of tapesty shall be as approved by GE complete all as specified in drawings & directed .
(b) Preparation of surfaces of sofa set 5 seater by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
(c) Preparation of surfaces of sofa set 4 seater by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
(d) Minor repairing of various sofa set 4/5 seater including tightening of frame with bamboo pins and fevicol complete all as shown in drawing and as directed by GE/Engineer-in-charge.
Bed Hard ply top/Bed Newar
(a) Taking down the existing unserviceable ply wood from the existing head rest of Bed Hard/Bed Newar and S & F new plywood 3.5 mm thick teak faced including teak wood beeding 4 mm thick as per shape and size shown in drawing and fixed with nails including french polishing to ply & beeding complete all as specified in drawings & directed .
(b) Taking down the existing unserviceable ply wood from the existing foot rest of Bed Hard/Bed Newar and S & F new plywood 3.5 mm thick teak faced including teak wood beeding 4 mm thick as per shape and size shown in drawing and fixed with nails including french polishing to ply & beeding complete all as specified in drawings & directed .
(c) Taking down the existing broken unserviceable side long rail from Bed Hard/Bed Niwar and S & F new side long rail of teak wood (Ist class) mm including french polishing with high class finish complete all as specified in drawings & directed .
(d) Taking down existing unserviceable ply top/newar from the Bed Hard/bed newar and S&F new ply top 12 mm thick,MR grade complete all as specified in drawings & directed .
(e) Taking down the existing unserviceable broken legs of Bed Hard and S&F new legs of Ist class teak wood including 04 Nos PVC shoes at the bottom of each leg as per shape and size shown in drawing including french polishing complete all as specified in drawings & directed .
(f) S&F wooden braket 8 Nos in each between each corners fixing with suitable screws complete all as specified in drawings & directed .
(g) Preparation of surfaces of Bed hard/Bed newar by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
Chair varandah :- M&L for recanning of seat & back of chair verandah steel with white plastic cane, 4 mm wide and 0.5 mm thick, weighing not less than 450 Grams per chair (+/-5%)(Plastic cane shall be of Make: Premier or equivalent) with and including 4 Nos. hard rubber shoe shall also be provided to the legs of chair and painting the steel chair verandah frame with one coat of white synthetic enamel paint of Ist quality complete all as specified in drawings & directed .
Bed Hard (MAP)
(a) Removing of old unserviceable prelaminated particle board of Head board and S & F new prelaminated particle board of Head board shall be fitted with 18 mm thick pre-laminated particle board both side decorative duly fitted with PVC edging and complete all as shown on drawing and as directed.
(b) Removing of old unserviceable prelaminated particle board of foot board and S & F new prelaminated particle board of foot board shall be fitted with 18 mm thick pre-laminated particle board both side decorative duly fitted with PVC edging and complete all as shown on drawing and as directed.
(c) Taking down existing unserviceable ply top from the Bed Hard and S&F new ply top 12 mm thick MR grade fitted with steel screw complete all as specified in drawings & directed .
(d) S&F cap all as per shape and size complete all as specified in drawings & directed .
(e)Painting to Bed hard with one coat of black synthetic enamel paint of Ist quality including preparation of old surface complete all as specified in drawings & directed .
Chair dining MAP
(a) Removing old broken/unserviceable front legs from chair dining and S&F new front legs of Ist class hard wood (teak wood) including 04 Nos PVC shoes at the bottom of each leg as per shape and size shown in drawing complete all as specified and directed.
(b) Removing old broken/unserviceable rear legs from chair dining and S&F new rear legs of Ist class hard wood (teak wood) including 04 Nos PVC shoes at the bottom of each leg as per shape and size shown in drawing complete all as specified and directed.
(c) Removing old broken/unserviceable side rail from chair dining and S&F new side rail of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.
(d) Removing old broken/unserviceable front rail from chair dining and S&F new front rail of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.
(e) Removing old broken/unserviceable back rest from chair dining and S&F new back rest of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.
(f) Removing old broken/unserviceable centre stiffiner from chair dining and S&F new stiffiner of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.
(g) Removing old broken/unserviceable side stiffiner from chair dining and S&F new stiffiner of Ist class hard wood (teak wood) as per shape and size shown in drawing complete all as specified and directed.
(h) S&F wooden braket 8 Nos in each between each corners fixing with suitable screws all as specified in drawings & directed .
(i) Removing old unserviceable foam from chair dining and replacing from 75 mm thick ,32 density with new PU foam of make: Sleepwell/coir foam from seat of chair dining and foam shall be covered with cotton tapesty cloth of range not less than Rs.302.00 per meter, colour, shade and quality of tapesty shall be as approved by GE complete all as specified and directed.
(j) M&L for polishing all repaired chairs with high class french/ sprit polish till glossy finish is obtained complete all as specified and directed.
Table writing
(a) Removing old unserviceable top from table writing and S&F new top as per shape and size shown in drawing of 18 mm thick of prelaminated partical board exterior grade typr -II melamine face as per IS-3087, top of teack face and white laminated on other side with 4 mm thickIst class hard wood(teak wood) beading fixed with nailsincluding frenchpolishing to beading complete all as specified and directed.
(b) Removing old broken /unserviceable side short rail of table writing and S&F new side short/ long rail made of Ist class hard wood(teak wood)as per shape and size shwon in drawing including french polishing to match the other parts complete all asspecified and directed.
(c ) Removing old broken /unserviceable side long rail of table writing and S&F new side short/long rail made of Ist class hard wood(teak wood) as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed.
(d) Removing old broken/unserviceable legs from table writing and S&F new legs made of Ist class hard wood wood (teak wood) including 04 nos PVC shoes as per shape and size shown in drawing includings french polishing to match other parts complete all asspecified and directed
(e) S&F wooden bracket 8 nos in each table writing between each corners fixing with suitable screw all as specified in drawing & directed.
(f) Removing old broken / unserviceable back ply of box from table writing and S&F new back ply made of 6 mm thick commercial ply wood as per shape and size shown in drawing including french polishing to match other parts complete all as specified and directed.
(g) Removing old broken / unserviceable shuter of box from table writing and S&F new shuter made of 18 mm thick prelaminated pertical board including one nos magnetic catchter & handle in each shuter all as per shape and size shown in drawing.
(h) Removing old broken/unserviceable drawer from table writing and S&F new drawer made of as specified in drawing including one nos handle in each drawer all as per shape and size shown in drawing includings french polishing to match other parts complete all as specified and directed.
(i) Removing old broken /unserviceable centre stiffener from table writing and S&F new centre stiffener made of Ist class teak woodall as specified in drawing includings one nos handlein each drawer all as per shape and size shown in drawing includings french polishing to matchother parts complete all asspecified and directed.
(j) Removing old broken/ unserviceable side stiffener from table writing and S&F new side stiffener made of Ist class teak wood all as specified in drawings includings french polishings to match other parts
(k) Preparation of surface of table writing by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coat of french/sprit polishing on exposed surface to achive high class finish complete all as directed.
TABLE DRESSING LADIES WITH MIRROR
(a) Removing of old broken/unserviceable looking mirror with frame from the table dressing ladies and S&F new 5 mm thick looking mirror with frame as per sample shape and size shown in drawing of Make - Atul/Modi Complete all as specified and directed
(b) Removing old broken / unserviceable knob from table dressing ladies and S7F new 40 mm size CP brass knob as per sample , shape and size shown in drawing complete all as specified and dirrected.
(c) Removing old broken/ unserviceable sliding glass from table dressing ladies and S&F new 5 mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and directed.
(d) Removing old broken legs from table dressing ladies and S&F new legs of Ist class hard wood(teak wood) as per shape and size shown in drawing includings french polishing to match the other parts complete all as specified and directed.
(e) Removing old broken/ unserviceable sunmica from the top of table dressing ladies and S&F new 0.8 mm thick sunmica of best quality fixed with fevicoal as per shape and size shown in drawing complete all as specified and directed
(f) Removing old broken/ unserviceable back side of table dressing ladies and S&F new back side as per shape and size shown in drawing complete all as specified and directed
(g) Removing old broken/ unserviceable drawer from the table dressing ladies and S&F new drawer including PVC knob as per shape and size shown in drawing complete all as specified and directed
(h) Preparation of surface of table dressing ladies by applying one sealer coat and making the surface plain by scraping with fine sand paperand polishing two coat of french/ sprit polish on exposed surface th achive high class finish, complete all as directed.
SIDE BOARD
(a) Takig down the old broken/ unserviceable top from side board and S&F new top as per shape and size shown in drawing of 18 mm thick of prelaminated partical board exterior grade type -II complete all as specified and directed.
(b) Removing old broken / unserviceable side of side board and S&F new side of Ist class hard wood (teak wood) as per shape and size shown in drawing includings french polishing to match the other parts complete complete all as specified and dirrected.
(c) Removing old broken/ unserviceable back of side board and S&F new back as per shape and size shown in drawing of 6 mm thick commercial ply including french polishing to match the other parts complete all as specified and directed.
(d) Removing old broken/ unserviceable door of side board and S&F new door of Ist class hard wood (teak wood) as per shape and size shown in drawing including french polishing to match the other parts with piono type hinges complete all as specified and directed.
(e) Removing old broken/ unserviceable drawer of side board and S&F new drawer as per sample, shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed
(f) Removing old broken/ unserviceable aluminium handle from the side board and S&F new alumunium handle as per sample, shape and size shown in drawing complete all as specified and directed
(g) Preparation of surface of side board by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coat of french/sprite polish on exposed surface to achive high class finish complete all as directed
Part-II Nowgong portion
Recanning of all type chairs :- M&L for recanning of chairs and other furniture with white, half round plastic cane, 2 mm wide and 0.3 mm thick, weaving shall be done as per Godrej Pattern (Plastic cane shall be of Make: as approved by GE/Engineer-in-charge) complete all as specified in drawings & directed . Note - Chair dinning 0.39x0.39=0.1521, Chair writtiing-0.43x0.47=0.2021,Chair easy seat-0.51x0.44=0.2244 & back-0.41x0.32=0.1321
Minor repairing of various type of wooden chair including tightening of frame with bamboo pins and fevicol complete all as shown in drawing and as directed by GE/Engineer-in-charge.
M&L for polishing of chair dinning with high class french/ sprit polish till glossy finish is obtained complete all as specified in drawings & directed .
M&L for polishing of chair writting with high class french/ sprit polish till glossy finish is obtained complete all as specified in drawings & directed .
M&L for polishing of chair easy with high class french/ sprit polish till glossy finish is obtained complete all as specified in drawings & directed .
Chair varandah :- M&L for recanning of seat & back of chair verandah steel with white plastic cane, 4 mm wide and 0.5 mm thick, weighing not less than 450 Grams per chair (+/-5%)(Plastic cane shall be of Make: Premier or equivalent) with and including 4 Nos. hard rubber shoe shall also be provided to the legs of chair and painting the steel chair verandah frame with one coat of white synthetic enamel paint of Ist quality complete all as specified in drawings & directed .
Bed Hard ply top/Bed Newar
(a) Taking down the existing unserviceable ply wood from the existing head rest of Bed Hard/Bed Newar and S & F new plywood 3.5 mm thick teak faced including teak wood beeding 4 mm thick as per shape and size shown in drawing and fixed with nails including french polishing to ply & beeding complete all as specified in drawings & directed .
(b) Taking down the existing unserviceable ply wood from the existing foot rest of Bed Hard/Bed Newar and S & F new plywood 3.5 mm thick teak faced including teak wood beeding 4 mm thick as per shape and size shown in drawing and fixed with nails including french polishing to ply & beeding complete all as specified in drawings & directed .
(c) Taking down the existing broken unserviceable side long rail from Bed Hard/Bed Niwar and S & F new side long rail of teak wood (Ist class), well seasoned including french polishing with high class finish complete all as specified in drawings & directed .
(d) Taking down existing unserviceable ply top/newar from the Bed Hard/bed newar and S&F new ply top 12 mm thick,MR grade complete all as specified in drawings & directed .
(e) Taking down the existing unserviceable broken legs of Bed Hard and S&F new legs of Ist class teak wood including 04 Nos PVC shoes at the bottom of each leg as per shape and size shown in drawing including french polishing complete all as specified in drawings & directed .
(f) S&F wooden braket 8 Nos in each between each corners fixing with suitable screws complete all as specified in drawings & directed .
(g) Preparation of surfaces of Bed hard/Bed newar by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
Sofa set 4/5 seater
(a) Removing of old cushion of size 21 x 22 inchs & 4 inchs thick from sofa set and replacing foam cushion of sofa set five seater with new PU foam cushion of 32 density (make: Sleepwell/Kurlon and cushion shall be covered with cotton tapesty cloth of range not less than Rs.302.00 per meter, colour, shade and quality of tapesty shall be as approved by GE complete all as specified in drawings & directed .
(b) Preparation of surfaces of sofa set 5 seater by applying one sealer coat and making the surface plain by scraping with fine sand paper and polishing two coats of french/sprit polish on exposed surface to achieve high class finish, complete all as specified in drawings & directed .
KAIRALI ENTERPRISES
ROHIT ENTERPRISES
Budget Furniture Industries
HINDUSTAN ENGINEERING WORKS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .