SPECIAL REPAIR TO CERTAIN MD ACCN AND BUILDING NO P-135 AT AF STN SALUA (PHASE-II) UNDER GE (AF) KALAIKUNDA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided (reinforment cut as required to facilitate demolition) complete all as specified and directed.

Dismantling of brick work built in cement mortar or cement lime mortar of any description and in any position complete all as specified and directed.

Excavation in trenches n.exc. 1.50m wide and n.exc. 1.50m in depth & getting out in any type of soil complete all as specified and directed.

M&L for Providing steel adjustable props to support the existing roof slab to facilitate the repair/removal of old brick wall and till construction of new brick wall from ground to roof slab level complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete.

M&L for reinforced cement concrete (design mix) M-25 (20mm graded aggragates) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concretecomplete all as specified and directed.

S&F Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required,including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified.

All as per item above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders etc all as specified and as directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc all as specified and as directed

Taking down chowkats or frames with shutters not exceeding 1.5 Sqm (without taking off shutters from the frames).all as specified and as directed

Taking down chowkats or frames with shutters exceeding 1.5 Sqm but not exc 4 sqm each (without taking off shutters from the frames).

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and refixing in same opening complete all as specified and as directed

S&F in repair Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and as directed

Taking up or down steel tubing 15 mm bore of pipe and connections, including cleaning for refixing or removal to store.

Taking up or down steel tubing 20 mm bore of pipe and connections, including cleaning for refixing or removal to store all as specified and as directed

S&F Steel tubes, medium grade, galvanised with all fittings ISI marked and fixed complete to walls and ceilings or laid in floors, bore of tube 15 mm all as specified.

S & F Steel tubes, medium grade, galvanised with all fittings ISI marked and fixed complete to walls and ceilings or laid in floors, bore of tube 20 mm all as specified.

S&F Stainless hollow steel tube size 25mm bore fixing with brackets including taking down complete all as specified and directed.

Fair cutting exc 10 cm width or girth straight or raking cutting on exposed surfaces of brick work for inserting precast RCC bands into existing weak masnory/wall complete all as specified and directed.

M&L for providing type B-1 1:2:4 (20mm graded aggregate) precast cement concrete building blocks or slabs 10 cm thick (with plain or interlocking joints as directed) set in cement mortar 1:4 complete all as specified and directed.

M&L Old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6 all as specified.

All as item hereinbefore but except bricks.

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl racking out joints hacking for key scrubbing with water etc all as sepcified.

M&L for rendering 10 mm thick in CM 1:6 on other than fair face of brick work surfaces finished even and smooth with out being extra cement all as specified.

M&L for rendering 15mm thick in CM 1:4 on other thatn fair face of brick work surfaces finished even and smooth with out using extra cement all as specified.

M&L for rendering 15mm thick in CM 1:6 on other thatn fair face of brick work surfaces finished even and smooth with out using extra cement all as specified.

M&L for rendering 5 mm thick in CM 1:3 on fair face of concrete surfaces as in ceiling, chajja, shelves etc finished even and smooth with out using extra cement all as specified.

M&L preparation of newly plastered wall and applying two coats distemper oil emulsion over coat of chalk whiting to prepare for distempering complete all as specifed and directed.

M&L preparation of newly plastered wall and applying two cement based paint two coats over a coat of alkali resistant primer paint to wall surfaces including preparation of surfaces. complete all as specifed and directed.

M&L preparation of new ceiling surfaces and applying of two coats of whitewash complete all as specifed and directed.

Complete removal of existing treatment to walls by scraping, sand papering rubbing down and wash with water. complete all as specifed and directed.

Complete removal of existing treatement to ceilings by scraping , sand papering ,rubbing down and wash with water complete all as specified and directed .

M&L preparation of old surfaces of wall and applying two coats distemper oil emulsion complete all as specifed and directed.

M&L preparation old surface of walls and applying two coats of cement based paint complete all as specifed and directed.

M&L preparation of old ceiling surfaces and applying of one coat of whitewash complete all as specifed and directed.

M&L preparation of old wall surfaces and applying of two coat of whitewash complete all as specifed and directed.

M&L hard core of broken stone or boulder having gauge n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thk, watered and rammed to a true surface, complete all as specified and as directed.

M&L 50 mm thick cement Concrete Type C2, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and as directed.

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over screed bed or bedding layer of cement mortar 20 mm thick for laying floor finishes complete all as specified and directed.

M&L cement Concrete 100 mm thick Type B2, 1:2:4 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.

M&L machine cut kota stone slab flooring 20-25mm thick as in skirting, riser of steps, dado etc.laid over screed bed or bedding layer of cement mortar 15 mm thick complete all as specified and directed.

M&L Cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate for sub base to floors etc 25mm thick. complete all as specified and as directed .

M&L non skid coloured ceramic tiles 7 mm to 8 mm thick area of eah tile 0.06 sqm but not.exceeding 0.11 sqm,in floors, set jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 15 mm thick cement mortar 1:6, complete all as specified and directed.

M&L Glazed white ceramic tiles in vertical surfaces 300 x 250 x 7mm thick set joint in neat cement slurry and pointed in white or coloured cement to match etc over a bedding layer of 10 mm thick plaster complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing.

S&F Factory Made Solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawingas per specification and drawing.

M & L Chequered cement concrete tiles 30cm x 30cm x 30mm thick, set, jointed and pointed in neat cement slurry with gray cements and pigments in floors/path all as specified and directed.

M&L Providing precast cement concrete louvres and jallies of Type B0 1:2:4 (12.5 mm graded aggragate), 35 mm thick (measured solid), including all mouldings but excluding frame set in cement mortar 1:4 with complete all as specified.

M & L for 20mm thick screed bed or bedding layer in cement mortar (1:6), for laying floor finish etc all as specified and as directed.

S&F 125 x 60 mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. with one shop coat of red oxide primer complete all as specified.

S&F 105 x 60 mm size pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. with one shop coat of red oxide primer complete all as specified.

S&F 35mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, paneled shutter (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial face veneers on both faces or 10mm bison panel.

S&F 35mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive the glass gauge etc edge of framing plain chamfered or rounded fitted with out and mitered beads for securing glass etc all as specified.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc all as specified.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded etc all as specified.

S&F Steel windows or ventilators, fixed type, with glazing bars etc all as specified.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, etc all as specified.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F for framed work (Fe 410-W (Gde-E-250) quality as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F 0.80 mm thick mild steel , plain , black sheet in hearths, coverings to doors shutters , covering to door chowkats etc cut to size,edges beaded if directed, holes punched, including round headed screws , clout nails or revets and fixed to steel members etc with plain 40mm lap joints or welded/ riveted seams including bending , turning up , mitred angles , stopped ends etc as required complete all as specifed and directed.

M&L welding in repairs n. exc 2.5 cm in length and thickness of metal to be welded exc 6 mm and not exc 9 mm complete all as specified and directed.

S & F 150 mm Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L preparation of old steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint all specified and directed.

M&L for preparation of old wood or wood based surface and applying one coat of synthetic enamel paint complete all as specified and directed .

M&L two coats of synthetic enamel paint to new wooden surfaces previously untrested surfaces including preparation of new surfaces over a coat of pink primer complete all as specified and directed.

M&LTwo coats of synthetic enamel paint to new steel surfaces previously untreated including preparation of new surfaces over a coat oxide. complete all as specified and directed.

S&F harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc fixed in repairs complete all as specified and directed.

S&F Aluminium butt hinges, heavy weight cold rolled 100mm size complete all as specified and directed.

S&F Aluminium bow handle cast type anidised 150mm size.complete all as specified and directed.

S&F Aluminium anodized barrel tower tower bolts of extruded sections and fixed of length of bolt 150mm size.complete all as specified and directed.

S&F Aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 300mm size.complete all as specified and as directed.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed in repairs complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

Hacking out old glasses from steel window/ventilator in any position and any description including punching or drilling out old glazed pins/springs clips etc complete.

M&L for cutting holes in brick walls exc half brick but not exc one brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required (Depth of embedded portion measured from the face of the jamb into the wall) complete all as specified and as directed.

S&F Vitreous china squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rests including provision of lime come concrete bedding fixed in repairs complete all as specified and as directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) white, S trap including plastic WC seat cover, closed pattern with flat bottom and mild steel CP hinging device and incl CP jet nozzle for EWC including connection to GI pipe line complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 ltrs capacity white with Inlet ball value, float valve and handle incl brackets, PVC flush pipe fixed in repairs complete all as specified.

S&F vitreous china wash hand basin white lat back size 550x440 mm including brackets complete fixed in repairs complete all as specified.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) fixed in repairs complete all as specified.

S&F Flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 450mm.complete all as specified.

S&F in repair Bib tap cast copper alloywith crutch or butterfly handle,chromium plated fancy type screwed for iron pipe, suitable for 15mm bore complete all as specified.

S&F in repair stop valve cast copper chromium plated concealed type screwed down, high pressure with long shank and cup suitable for 15 mm bore complete all as specified.

S&F pillar cocks cast copper alloy with capstan heads, chromium plated screwed down high pressure with or with out letter hot or cold with long screwed shanks and fly nuts screwed for GI pipes or for unions, 15mm size. complete all as specified.

S&F Soap dish any type fixed to plugs with chromium plated brass screws. complete all as specified.

S&F brass chromium plated tubular towel rail 20mmdia D type 60cm long between flanges compete all as specified.

SS&F brass chromium plated shower rose 125mm size with swivel joints including fixing to steel pipe or union etc complete all as specified and directed.

M&L PVC (SWR) `P' trap 125/110 mm bore, plain with grating including jointing with solvent cement complete all as specified.

M&L PVC (SWR) `S' trap 125/110mm bore, plain with grating including jointing with solvent cement complete all as specified.

M&L PVC (SWR) pipes single socketed, 75 mm bore, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

M&L PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified.

S&F PVC (SWR) pipes single socketed, 110mm bore, in any length with rubber ring joints, fixed in walls complete all as specified.

S&F PVC (SWR) bends, 110mm bore, in in any radius complete all as specified.

S&F shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms)complete all as specified and directed.

M&L rendering dubbing coat over damaged irregular surface of Ceiling, chajjas and roof projections ceiling facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth incl making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note :- Rate of necessary form work if reqd to be included in the rate quoted by contractor.

M&L Reinforced cement concrete Type B1 1:2:4 (20mm graded aggregate) Nominal mix for chajjas, Fins facia etc and the like complete all as specified and directed.

M&L form work to facia /fins and connected chajjas etc for the fair finished surfaces complete all as specified and as directed .

M&LCement concrete (1:3:6) type D2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete (bed to drain)complete all as specified.

M&L for cement concrete type (1:2:4) type B1, using 20mm graded aggregates as in surface channels and drains complete all as specified..

Returning filling in incl spreading , levelling & well ramming complete all as specified..

Removing excavated materail n.exc. 50m and depositing where directed to a level n.exc. 1.50m above starting point complete all as specified.

Removing waste building material exc 500 mtr and n.exc 1000 mtr and rates including loading , unloading and stacking at the destination where directed.

Extra for forming fair finished drain or chaneel exc 30cm inner girth in cement concrete using extra cement including moulds, mittred/stopped ends etc. all as specified.

Striping of existing roof felt of any description carefully from existing roof/Parapet without disturbing wall surfaces and removing distances exc 500 m n.exc 1.5 Km all as specified and as directed

Providing steel adjustable props to support the existing roof slab to facilitate the repair/removal of old brick wall and till construction of new brick wall from ground to roof slab level complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc all as specified and as directed

M & L for Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar 1:3 mixed with integral water proofing compound whenever required and finished fair and even all as specified and as directed. Note :- Water proofing compound paid seperately.

M & L for Providing, cement concrete in roof padding or hunching like using type B1, 1:2:4 (20mm aggregate) completed all as specified

Supply only Liquid water proofing compound complete all as specified and directed.

Brushing neat cement slurry with 3.0 Kg of cement per Sqm all as specified and as directed

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces completed all as specified and as directed.

Supply and laying minimum 3mm thick APP based polymeric membrane minimum weighing 3 kg / sqm reinforced with polyester non wove fabric (wt not less then 150 gms/sqm ) laid over cold solvent bituminous primer @0.25 Ltrs /sqm including a coat of aluminum paint @ 0.11 kgs / sqm over felt. Note :- Application of polymeric membrane shall be by LPG gas touching etc as per manufacturers instruction complete all as specified and directed

M & L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) completed all as specified.

M&L Cutting out concrete blocks, slabs, brickwork or stone masonry (in alternate course), forming toothings for and bonding new work in mortar into old work in CM 1:4, type B1, 1:2:4 (20mm graded aggregate), including new materials entering old wall all as specified.

M&L for heat resistant paint on surface of any description such as APP membrane, iron, concrete, bricks, stones etc exc 10cm in width or grith complete all as specified and as directed by Engr-In-Charge

Disconnecting existing tanks, setting aside ( or lowering if required) for repairs, cleaning, etc, and hoisting if required reconnecting and refixing in position exc. 250 and not exc. 500 ltrs complete all as specified and directed

Rotational moulded polyethene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I for 1000 Ltr capacity of tanks. complete all as specified and directed

M&L Ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed ® complete all as specified and directedBall brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed by Engr-In-Charge

Taking down carefully copper/aluminium point wiring (light, fan,socket or power) complete, including fittings and fixtures such as switches,ceiling roses,pendants, regulators, socket outlets, light fittings etc removing materials to store for keeping in safe custody or for taking credit & making good disturbed surfaces of walls,floors etc.complete all as specified and directed..

Taking down unserviceable existing sub main wiring with copper/aluminium conductor stranded cable upto and including 2 run of 4 sqmm /2 run of 6 sqmm single core including earth wire from existing conduit or wooden battens including taking out unserviceable wooden gutties etc, matching with the existing surfaces complete all as specified and as directed.

M & L Sub main wiring with two single core 4.0 sqmm (Nominal area) PVC insulated unsheathed multi stranded FRLS copper conductor cable 1100 volts grade incl earth continuity conductor using PVC insulated unsheathed multistranded FRLS copper conductor cable of size 2.5 Sqmm connected to common earth dolly and drawn in and including PVC casing &capping 20mm or higher size with all fittings and accessories (Note : PVC casing and caping and its accessories including 2 runs of cable & 1 run of earth continuity conductor cable shall be measured and paid as single unit).

M&L for surface point wiring with 1.5 Sqmm (Nominal area) PVC insulated, unsheathed, multistranded FRLS copper conductor cable (1100Volts grade) drawn in and including PVC casing capping with all fittings and accessories for one light point controlled by one switch alongwith PVC insulated cable with stranded FRLS copper conductor (green in colour) of size 1.5 Sqmm and connected to earth dolly including of 1. 2mm thick MS sunk terminal box suitably fixed flushed to wall and 3mm thick plastic laminated sheet top cover fixed with brass screws and cup washers complete.

All as per item No127 here-in-before but for one fan/ Ex Fan point controlled by one switch complete all as specified and directed..

All as per item No 127here-in-before but one 3 pin , 5 Amps socket outlet in the same board complete all as specified and directed..

All as per item No 127 here-in-before but for 5Amps socket point on independent board including of 2mm thick MS sunk terminal box suitably fixed flushed to wall and 3 mm thick plastic laminated sheet top cover fixed with brass screws and cup washers complete

All as per item No 127 here-in-before but for 15Amps power point on independent board with 4 Sqmm (Nominal area) PVC insulated, unsheathed, multistranded FRLSH copper conductor cable (1100Volts grade) & stranded copper conductor (green in colour) of size 2.5 Sqmm and connected to earth dolly including of 1. 2mm thick MS sunk terminal box suitably fixed flushed to wall and 3 mm thick plastic laminated sheet top cover fixed with brass screws and cup washers complete all as specified and directed..

All as per item No127 here-in-before but one bell point complete all as specified and directed..

M&L switch piano flush type single pole, one way, 5 Amps, 240 Vcomplete all as specified and directed..

S&F switch socket combination, 3 pin flush type 5 Amps, 240V complete all as specified and directed..

S&F Switch socket combination3 pin flush type multipurpose 16 Amps, 240V complete all as specified and directed..

S&F ceiling rose surface type with 3 terminals complete all as specified and directed..

S&F flush type electronic fan regulator with 4 step type,120 W, AC 240 Volts, 50 Hz complete all as specified and directed..

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F LED tubelight fitting 20 W single side connection complete including driver, LED lamp 20 W ( Tube rod) all as specified and directed by Engr - in - charge.

Supply and fix LED building security light 15 W IP 65 all as specified and directed by Engr-In - Charge.

Supply and fixing at any height bldg security energy saving LED light fitting 15 Watt complete with suitable capacity integrated electronic driver and 3 core PVC insulated flexible cord of size 0.75 sqmm copper conductor including 1.5mtr GI Pipe bracket (bend to shape) of suitable dia pipe, clamps, nuts, bolts and washer all as specified and directed by Engr-In - Charge.

S&F MCB, DB, SPN, 8 ways DOUBLE DOOR, IP-42, with rated bus bars,earth bar,neutral links complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces complete all as specified and as directed including dismantling taking down unsvericeable one

S&F SPN 40 Amps 240V ,50 Hz ,breaking capacity 10 KA," C " series. Including dismentling taking down unsvericeable one.complete all as specified and directed..

S&F MCB SP, 10KA, 230V, C-curve, 6-32 amps incl dismentling taking down unsv one.complete all as specified and directed.

S&F MCB, DB, TPN, 4 ways DOUBLE DOOR, IP-43, with rated bus bars,earth bar,neutral links complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces incl taking down unsv one complete all as specified and directed.

S&F MCB TPN, 63 Amps 415V ,50 Hz incl dismentling taking down unsv one complete all as specified and directed..

M/L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.

M/L bell push flush type single pole one way, 5 amp, 240 V complete all as specified and directed.

S&F call bell dingdong suitable for AC 230V single pole one all as specified and directed.