PROVN OF RR MASONRY DRAIN ALONG MAIN GATE AREA ALTERATION TO EXISTING DRAIN IN FOUNTAIN AREA AT CDM SECUNDERABAD ADDN ALTN TO ROOFING FLOORING FALSE CEILING PLUMBING AND SANITARY FIXTURE ETC IN OFFICERS TOILET BLDG NO P 510 GANDHI BLOCK CDM SECUNDER

Amount

Site clearance including cleaning away all grass, vegetation, saplings, shrubs, bush-wood, under growth and roots for making the approach to the working area and removing the rubbish to a distance of 50 metres outside the periphery of area complete all as specified and as directed.

Demolition of stone/brick masonary built in cement mortar including all quoins, arches, pillars, copings etc, complete all as specified and as directed.

Demolition of plain cement concrete in ground floors/pavings/drain bed n.exc 15cm thick below or above ground level, complete all as specified and as directed.

Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed.

Raking out cement mortar joints on Random Rubble masonary wall, complete all as specified and as directed.

Labour for cleaning of weeds, mud, sand, etc from storm water drain & culverts at any depth including, excavating of rubbish off from site in poul position & making drain functional complete all as specified and as directed.

M&L for earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains at any depth (upto 3.0m in width & upto 3.0m depth), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in any kind of soil complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregates in foundation concrete, bed of drains & pipe haunching etc., complete all as specified and as directed.

M&L for Walling of stone masonry, squared rubble, regular coursed, Secunderabad type, well bonded, bedded and solidly hearted well built in CM (1:6) complete complete all as specified and as directed.

M&L for Flush pointing to stone masonry squared regular coursed or uncoursed in cement 1 :4 including racking out joints complete all as specified and as directed.

M&L for raised pointing to Random Rubble Masonry brought upto courses in Cement Mortar (1:4), complete all as specified and as directed.

M&L for PCC (1:2:4) type B0 using 12.5mm graded stone aggregates for coping including necessary formwork, weathering, slightly rounded or chamfered angles and throating etc., complete all as specified and as directed.

M&L for 15 mm thick rendering in cm 1:4 on fair faces of brick work or concrete or RR masonry surfaces as parapet wall & haunching in drain bed etc., finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for Providing pre casted concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) set in CM 1:4 in landings, cover slabs ( for manhole) etc, chullah hoods, chajjas, lintels, shelves and similar articles with plain faces all as specified and as directed.

S&F mild steel TMT bars 8mm dia and over cut to length bent to shape reqd including cranking bending spirally for hoping columns hookings ends binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

M&L for RCC Hume pipe 600mm dia, class NP2, laid and jointed in cement mortar (1:1) complete with collars complete all as specified and as directed.

M&L for Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removing excavated material/soil to a distance exceeding 100m and not exceeding 250m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

S&F Framed work such as grills, grating, etc., with ends of bars shouldered and or riveted or forged into spikes, framed grating or similar work confirming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over one coat of Aluminium/red oxide primer including preparation of new surface of steel complete all as specified and as directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding (but not backing), removal serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile 600mmx600mm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed. Make: Kajaria/Johnson/Somany

S&F Glazed ceramic coloured tiles in vertical surface 1200x600x 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10 mm thick rendering in CM 1:3 all as specified and directed. Make: Kajaria/Johnson/Somany

S&F GI tubing 15 mm bore medium grade with all fittings fixed in short length to walls and ceilings or laid in floors including taking down 15 mm dia GI tubing and connections complete all as specified and directed.

M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, in cement mortar 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F in repairs toilet paper holder with flat recessed type of stainless steel complete all as specified and directed.

M&L for cutting existing steel tubing for alterations or additions (Each cut measured) 15 mm pipe complete all as specified and directed.

Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) 15 mm pipe complete all as specified and directed.

S&F in repair vitreous china counter top WHB white size 595x420x155mm or required size as approved complete all as specified and as directed. Make:Cat No:91207 hind ware or equivalent in JAQUAR as approved by GE.

S&F in repairs15mm size pillar tap fancy type long shank chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make:Cat No:CON:CHR-021KN JAQUAR or equivalent in hind ware/ Parryware/CERA as approved by GE.

S&F in repair ss waste coupling 32mm dia complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges as fixed in repair etc., complete all as specified and as directed.

S&F CP health faucet with 1.2 mtr tube and hook complete all as specified and directed. Make:Cat No:ALD-CHR-579 JAQUAR or equivalent in hind ware/ Parryware/CERA as approved by GE.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) in wall complete all as specified and as directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repairs PVC LDPE waste pipe 32mm dia of 1m length complete all as specified and directed.

S&F in repairs15mm size two way bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Make: Cat No:FON-CHR-40041 JAQUAR or equivalent in hind ware/ Parryware/CERA as approved by GE.

S&F in repairs Soap dish chromium plated any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs Stop/angle valves fancy type 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make: Cat No:CON-CHR-053KN JAQUAR or equivalent in hind ware/ Parryware/CERA as approved by GE.

S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing fixed in repairs complete all as specified and directed.

Taking out existing water closet, pedestal pattern and replacing with new EWC (Pedestal Pattern) cascade type with flush tank, seat cover etc white including fixing bolts complete including making good to floor to match with adjoining surfaces complete all as specified and directed. Make: Cat No:20123 (S-22) in Hindware or equivalent in JAQUAR as approved by GE.

M&L for preparation of new wall surfaces & applying two coat of distemper oil emulsion over a coat of alkali resistant primer over 3mm thick wall care putty in two layers complete all as specified and directed.

M&L for complete removal of existing treatment of external wall surfaces & applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall/concrete surfaces of any height complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered internal surfaces of wall and applying two coats of OBD over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered ceiling surfaces and applying two coats of OBD over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed. .

M&L for preparation of new/y plastered wall surfaces & two coat of acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall/concrete surfaces of any height complete all as specified and directed.

S&F 4 mm thick sheet glass frosted, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed.

S&F UPVC/PVC (SWR) floor trap 75mm dia, plain with SS grating including jointing with solvent cement complete all as specified and directed.

Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 mm x 50 mm mullion 47 mm x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 Sqm.) comprising of UPVC multi-chambered frame and mullion (whereever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 mm x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc., Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing/direction complete all as specified and directed. Note: Glass shall be paid separately. For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F in repair wall hung fancy type bevelled frameless looking mirror of 5mm thick size 1.50mx1.20m size with quality glass with SS Studs fixed to wall with chromium plated screws and cup washer complete all as specified and directed.

S&F in repairs Brass CP bottle traps 32mm bore for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L for 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit complete all as specified and directed.

M&L for Precast reinforced cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate set in CM (1:4) in landings for WHB, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 Sqm each etc including making good of hold fast holes with PCC Type C 1:3:6 complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each etc making good of hold fast holes with PCC Type C 1:3:6 complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, in opening as per specifications & drawings complete all as specified and directed.

S&F Factory made PVC solid door shutter 28mm to 30mm thick (styles) with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm Plain colour PVC sheet on back face with particle board Core supplying and fixing in frame at site as per specification complete all as specified and directed.

S&F in repairs Vitreous China bowl urinal angle back of size 280mmX345mmX690mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed. Make: Cat No. 96008 in Hindware or equivalent in JAQUAR as approved by GE.

S&F 12mm thick toughned glass frosted door with embedded Logo as required in hinged doors, urinal partitions, automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Gl frame work Size of grid 605mm x 605mm for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, AZ-150 of approved colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws and making good of wall & sheet junctions with CM 1:4 /PCC 1:2:4 complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

S&F Butt hinges of 125 mm size, Medium weight, cold rolled mild steel and fixed complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and directed.

M&L for cement concrete 1:4:8 Type D2 (40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L RCC (1:2:4) type B1 using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for RCC (1:2:4) type B1 using 20mm graded stone aggregate columns complete all as specified and directed.

M&L for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soils complete all as specified and directed.

All as per Sr No. 15 above, but 6 mm to 8mm dia as in stirrups complete all as specified and directed.

M&L for form work for fair finished surfaces of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for form work for fair finished surfaces of sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for brick work with sub class `B' bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour for rendering 15 mm thick on than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over priming coat on walls etc., all as specified and as directed.

M&L for framed work as in doors and gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides), decorative notches as approved and hanging; also fastening and fixing conforming to Fe-410 or Fe-310 complete all as specified and directed.

M&L for 1.0mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F for decorative knobs for fixing of gates any size, etc., complete all as specified and as directed.

M&L for preparation of new steel & iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint, quality, colour on these surfaces over a coat of red oxide, complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate as in bed block, coping, roof kerbs, bands etc including necessary form work complete all as specified and as directed

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note: Each line wire to be measured seperately.

M&L for mild steel work as in post and struts in fencing including cutting tops to shape, as directed, drilling holes, notching for wire etc, flat iron fillets, round/square bars, nuts and bolts etc including all necessary drilling, bolting or riveting, welding etc., and including embedding in concrete etc; complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

M&L for Hard core of broken stone or boulders of gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rolling with power roller exc. 8 tonne & n.exc. 12 tonne to a true surface complete all as specified and directed.

M & L for cement concrete 75mm thick 1:4:8 (40mm graded aggregate) type D2. as in sub base all as specified and directed by Engr-in-Charge

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 of 80 mm thickness, M-40 grade etc., complete all as specified and as directed.

Spreading and levelling of Sand/ grit cushioning below interlocking tiles complete all as specified and as directed.

M&L for pre cast Machine pressed cement concrete 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in kerbs stones and fixing all as per manufacturer instructions etc., size shall be decided and directed by GE

S&F vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittings with long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed.

S&F in stainless steel sink with drainage board, 1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers and wastes including bedding in cement mortar to dwarf wall or including fixing CI cantilever bracket, connecting union to pipe etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm etc complete all as specified and directed. Make : Nirali, Blue star ISI marked.

S & F in repairs Towel rail 600mm long of brass chromium plated fixed with and including CP brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and directed.

S&F PVC connections, 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fixed in repairs stop valve / angle cock fancy type cast copper alloy chromium plated with capstan head screwed down for 15 mm dia iron pipe complete all as specified and directed.

S&F stainless steel plate rack, wall mounted of size 750mm X 900mm X 200 mm of approved quality made of 1.00mm thick stainless steel for kitchen with necessary fixing material complete all as specified and directed.

S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6Kgf/Sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow, Tee, bends, unions, sockets, male and female threaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc., complete all as specified and as directed.

S&F CPVC pipes, SDR 11, 16 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all CPVC fittings with such as brass elbow ,Tee, bends, unions, sockets, male and female threaded Adoptor and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed.

Material and labour for Non skid coloured ceramic tiles of size exceeding 0.06 Sqm but not exceeding 0.11 Sqm of 7mm to 8mm thick set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including cement screed bed of cement mortar 1:6 of 15 mm thick complete all as specified and as directed. Make: Kajaria/Johnson/Somany

Material and labour for non-skid ceramic coloured tiles of size exceeding 0.11 Sqm but not exceeding 0.18 Sqm of 7mm to 8mm thick, in floors etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. Make: Kajaria/Johnson/Somany

Material and labour for glazed ceramic coloured wall tiles of approved colour of size 350mmx 250mmx 7mm/ 450mmx300mmx7mm thick on vertical surfaces as in dado/wall set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and as directed. Make: Kajaria/Johnson/Somany

Surface dressing not exceeding 15 cm deep in hard / dense soil, 15cm thick as in hard/dense soil complete all as specified and directed.

M&L for PCC 1:2:4 type B1, using 20 mm graded stone aggregate as in benching and surface channels for man holes or drains etc., including necessary formwork complete all as specified and as directed.

M&L for brick work with fly ash bricks using old size bricks, straight or curved on plan not exceeding 6 mtr mean radius, built in cement mortar 1:4 complete all as specified and as directed.

M & L for rendering 15mm thick in CM 1:4 on other than fair face of brick work surfaces to be finished fair and even smooth with using extra cement and mix with 2% water proofing compound (WPC) by weight of cement complete all as specified and as directed. Note: WPC measured separately as supply only.

M & L for rendering 15mm thick in CM 1:6 on other than fair face of brick work surfaces to be finished fair and even smooth complete all as specified and as directed.

M&L for extra over forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc., complete all as specified and directed.

M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slab for man hole set in CM 1:6 complete all as specified and directed.

M&L for 200mm bore reinforced concrete pipes, class NP3 laid and jointed with collar all as specified and as directed.

M&L for concrete bed with cement concrete 1:4:8 type D2 using 40mm graded stone aggregate to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested of 200 mm bore complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for cutting into existing manholes for connecting new drain, making good to pipe and rendering, cutting out existing benching for end forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150 mm internal dia of pipe all as specified and as directed.

M&L for construction of Soakage wells including excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4m dia x 3.0 m effective depth as per drawing No.TD/ST/748, sheet No 1/1 dt 22 Jan 2011 complete all as shown on drawing and as directed.

S&F on site LLDPE conventional septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection and capacity of tank 5000 ltrs etc., for 20 users complete all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and directed.

M & L for Point wiring on concealed conduit with 1.5 Sq mm FRLS copper conductor single core PVC insulated sheathed 1100 V multistranded drawn through existing conduit and conduit accessories of suitable dia medium grade and modular accessories including fixing/grouting sunken/ surface along with modular flush box of suitable thickness covered with suitable modular cover plate including running up of 1.5 Sqmm FRLS copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc., complete all as specified and directed for :- (a) One light/fan/Bell point controlled by one, one way switch 5A, SP NOTE: Rate of Modular Flush box and Cover plate are inclusive of rate quoted by the contractor

All as per Sl No 120 above, but one 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and directed.

All as per Sl No 120 above, but one 3 Pin 5 Amps switch socket Independent board complete all as specified and directed.

Description all as per item No 120 here-in-before, but using 2.5 Sqmm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sqmm FRLS copper conductor PVC wire as earth continuity conductor alongwith wiring and connecting to the common earth dolly complete all as specified and directed.

S & F Modular switch 1 way 10 A, 1 Module capacity 230 volts complete all as specified and directed.

S & F Modular switch 1 way 16 A, 1 Module capacity 230 volts complete all as specified and directed.

Supply and fix socket outlet modular type multipurpose 2/3 Pin, 10 amps, 230 volts combined 2 Module complete all as specified and directed.

Supply and fix socket outlet modular type multipurpose 2/3 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified and directed.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and directed.

S & F in replacement of round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders LED lamps suitable for roof ceiling including connecting up with 3 core flexible copper conductor cable of suitable size complete with luminaries system efficacy >100 lm/w with IP & surge protection of 10 kV, power factor >0.95 complete with all accessories complete all as specified and as directed. Make: PHILIPS/HAVELLS/WIPRO Note: (i) Cutting of False ceiling and removal of old fitting and re-arranging the False ceiling with existing size, Gypsum board/POP false ceiling is to be done if required (ii) Cost of False ceiling work is inclusive of rate quoted.

S and F in replacement of sheet metal enclosure MCB DB SPN 8 way with rated bus bar 240 Volts double door with magnetic locking system complete all as specified and directed.

S & F in replacement of MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified and directed. Make: IndoAsian Cat Part No. 811122-29 or equivalent in Legrand/Havells as approved by GE.

S & F MCB SPN 230V suitable for fixing on MCB DB of capacity 32/40 Amps complete all as specified and directed. Make: IndoAsian Cat Part No 811152 or equivalent in Legrand/Havells as approved by GE.

M & L for Submain wiring with two single core 6 Sqmm PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of 6 Sqmm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and directed. Note:- Two runs of cable, one run of earth continuity conductor and one run of conduit shall be measured and paid as one unit length.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, copper winding of sweep 250 mm complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V , 50 Hz, RPM 1200, copper winding of sweep 300 mm complete all as specified and directed.

M/S UDAY BUILDERS

SAI RUPA CONSTRUCTIONS

M/s GM Constructions

harshraj and co