Providing Cabin and Seating arrangements for the DMA and DTP officers and other staffs in UAB Campus

Supply and fixing Water Proof Plywood Modular Two Seater Workstation Dais of Required size and Height of 1.2m with Plain Red Carpet finishing included cost of Synthetic Resin - Fevicol for pasting and all material, Transport charges, Loading unloading, all labour charges etc complete as Directed by Departmental officers.

Rectangle Conference Table Size of 8' -0''X 4'-0'' X 2'-6'

Special Type Chief Executive Table 8'-0'' X 4' -0''X 2' 6" / side unit 4'-0'' X 1'-6''X 2'-6'' with 8 mm glass top made out of 18 mm commercial plywood, 6 mm commercial plywood as per is;303/1989, 1.2 mm laminate sheet, 20", 16" telescopic channel, 4" handle ,lock arrangements with 8 mm plain glass top good finish

Executive Table size of 6' L x 3' B x 2.5' H with side unit of size 4' L x 1.5' B x 2.25' H Made out of 18mm, 12mm commercial plywood as per IS;303/1989, Fully laminated by 1.2mm High Glossy Laminated sheet, 45x2mm, 20x2 mm edge band tape, auto hinges, telescopic channel 20'', 16'', SS 6", 4" handle, MP Lock with good finish.

Modular Executive Table Size of 5' 0" x 3' 0" x 2' 6" With Movable Pedestal Unit made out of 18 mm, 6 mm commercial plywood as per is;303/1989 , both side are laminated by 1 mm high glossy laminate as per is;2046 , lock, handle, 20'' , 16'' telescopic channel , 20x2mm, 22mm x 0.5mm pvc edge band with good finish.

Wooden conference chair with arm

Wooden table 4'-0'' x 2' -0''x 2'-6'' laminated finish with one rh drawer and cupboard and keyboard arrangements made out of 18 mm, 6 mm commercial plywood as per is;303/1989 , both side are laminated by 1 mm high glossy laminate as per is;2046 , lock, handle, 20'' , 16'' telescopic channel , 0.8mmx22 mm edge band with good finish

Supply and fixing Plywood Modular partition work of Required size of height 1.2m made with Water Proof Plywood 19mm thick Aluminium Strips of size 40mm wide x 1.5mm thick Alu.section 50 x 25 x 1.50mm frame work at 600mm C/C in vertical direction and 1250mm @ C/C at horizontal direction with necessary rubber beadings, screw Laminates sheets 1.0mm Thickness, including cost of Synthetic Resin - Fevicol for pasting and all materials, Transport charges, Loading unloading, all labour charges etc complete as Directed by Departmental officers.

Supply and fixing Plywood Partition of Required size of height 2.5m made with Water Proof Plywood 19mm thick Alu.section 50 x 25 x 1.50mm frame work at 800mm C/C in vertical direction and 1250mm @ C/C at horizontal direction with necessary rubber beadings, screw and both Side Laminates sheets 1.0mm Thickness, including cost of Synthetic Resin - Fevicol for pasting and all materials, Transport charges, Loading unloading, all labour charges etc complete as Directed by Departmental officers.

Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using adhesive and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete.