e-NIT No.12 / EnM (WEST)/ 2020-21, Item No.04

S/O Mono Bloc pump-set, 10 HP, Discharge-20 LPS (approx.), at approx. 32 meter head. Make: Kirloskar / CG / DJB Approved.

S/O MS Black pipe 100 mm dia. Medium (B Class). Make: - Jindal/Tata.

S/O MS Black pipe 80 mm dia. Medium (B Class). Make: - Jindal/Tata.

S/O MS D/F Bend of size: 100mm Φ (90⁰), thickness of 15 mm.

S/O MS D/F Bend of size: 80mm Φ (90⁰), thickness of 15 mm.

S/O MS Flange, of size: 100mm Φ dia 15mm thickness.

S/O MS Flange, of size: 80mm Φ dia 15 mm thickness.

S/O MS Tee Heavy Duty of size 100*100*100mm Φ dia.

S/O MS Tee Heavy Duty of size 80*80*80mm Φ dia.

S/O C.I.D.F. Non rising with SS spindle sluice valve of size 100 mm Φ PN: 1.0 IS: 14846.Make: Kirloskar / IVC

S/O C.I.D.F. Non rising with SS spindle sluice valve of size 80mm. PN: 1.0 IS: 14846.Make: Kirloskar / IVC

S/O PVC insulated, single core, unsheathed Copper cable, working upto 1100 volt, as per IS: 7098, of 10 sq. mm. Make: Havells / Grandlay / DJB Approved.

S/O Nut bolt with washers of good quality (off size), as per site requirement.

Supply of Pressure gauge having 0 to 10 Kg/sq. cm with GI fitting and bib cockMake:- Guru / Feibig

S/O Rubber insertion jointing sheet. Make:-Jyoti / National.

LT Distribution panel sheet steel enclosure made out of 2mm CRCA sheet totally enclosed, powder coated free standing, floor mounted type, dust& vermin proof, outward opening, lockable doors having hidden hinges and a bolted back cover both using non-deteriorating neoprene rubber gaskets to provide IP protection .The each part of the fabricated panel will be strictly subjected to seven tank treatment. The various components, assemblies and sub equipments of the panel will be as per standard given in relevant IS. The bus bar of the panel will be shaped out of high conductivity, electrolytic conductor and shall be liberal sized in aluminum. The control wiring of the panel will be done with PVC flexible copper wires of 1.5mm cross section. Each wire will be terminating with a ferule crimped to the wire, size 1200MM x1000x400mm. Having following components make. MCCB 415V, TP 3phase 50Hz,100Amp with handle & Spreader:- 1 No. Make L&T/Siemens MCCB 415V, TP 3phase 50Hz,50Amp:- 2 No. Make L&T MCB Single pole 6Amp:- 9 Nos. Make L&T/Havells MCB Triple pole 32Amp:- 2 Nos. Make L&T/Havells Power capacitors 415V unit of 8Kvar:- 2 Nos. Make: Epcos Over load relay 20-33:- 2 Nos. Make: L&T/Siemens Over load relay 4.5Amp. -7.5Amp:- 1 No. Make: L&T/Siemens Digital Amp. Meter:- 4 Nos. Make AE/L&T Digital Volt Meter0-500V:- 1 No. Make AE/L&T Motor protection Relay :- 2 Nos. Make: L&T/Siemens Power contactor 220V 3phase50Amp:- 4 Nos. Make L&T/Siemens Power contactor 220V 3phase32Amp:- 2 Nos. Make L&T/Siemens Power contactor 220V 3phase18Amp:- 1 No. Make L&T/Siemens Star delta timer on delay:- 2 No. Make: L&T/Siemens Indicating lights LED type RYB & On/OFF:- 9 Nos. Make : L&T /Havells Current Transformer200/5 ,50/5:- 12 Nos. Make AE /Advance On load change over switch 200Anp. Open execution type:- 1 No. Make: L&T Fitting of the above components in panel enclosure with terminal blocks, channels, ferrules, thimble, support insulator on bus bar, required hard wares complete in all respect. Loading ,unloading by crane or heavy labor and cartage up to site. Dismantling of old panel structure including removing of cable etc. from site ,cleaning & dressing the surface for Installation of the panel at site on base frame ,laying of cable ,termination of cable both incoming & out going side:- 1 Job.

Dismantlling of old system from LT pannel i.e. old type components & allied accessories, MS sheets, enclosures etc. and shifting the same. Installation of the panel at site, matching of bus bars ,links, bends, re-dressing of existing cable at site ,termination of cable both incoming & out going side through cable gland & thimble Testing & commissioning of panel & allied accessories as per required parameters with relevant IS .testing of the panel prior to switching on as follow:- i) Continuity and earth testing ii) Meggaring of all equipments for phase to phase, neutral to body, neutral to earth and phase to earth.

Dismantling existing E&M equipments with the help of heavy labour, welding, cutting, etc. Installation of all electrical & mechanical equipment including loading unloading, fixing of pump-set, sluice valves, alignment, making connections of panel to starter and starter to pump-set, connection with bus-bar with thimbles, taking all safety precaution arranging all tool & tackles. Painting of pipes and valves etc. The work inclusive of testing and commissioning of all E&M equipment at no-load and on full load successfully, with the help of man / machine required. The job to be done on turn-key basis and any item not mentioned above but required to complete the work will be provided by the contractor.

RRPN GROUP OF SOLUTIONS

R K CORRUGATEDBOX AND ALLIED PRODUCTS