Supply of hardware materials Civil required for the construction of stalls and stage for the celebration of Island Tourism Festival 2024 at Car Nicobar.

Amount

Supply of marine plywood of approved manufacturer of following sizes conforming to IS 710.

19 mm thick Marine plywood conforming to IS:710

12 mm thick Marine plywood conforming to IS:710

06 mm thick Marine plywood conforming to IS:710

Supplying of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge.

Size of 4.87x1.07mtr

Supplying of synthetic enamel paint of approved brand and manufacture of required colour to give an even shade as approved by the Engineer-in-charge.

Supplying of Acrylic Smooth exterior paint of required shade as approved by the Engineer-in-charge.

Supplying of White Cloths for decoration of ceiling in pandal as approved by the Engineer-in-charge.

Supplying of satin cloths for decoration of pandal/stage as approved by the Engineer-in-charge.

Supplying of MS Nails of good quality and approved make of different size as approved by the Engineer-in-charge.

MS Nails of size 4 inches

MS Nails of size 3 inches

MS Nails of size 2½ inches

MS Nails of size 2inches

MS Nails of size 1½ inches

MS Nails of size 1 inches

Supplying of paint brush of superior make and approved quality as approved by the Engineer-in-charge.

Paint brush of size 4 inches

Paint brush of size 3 inches

Paint brush of size 2 inches

Supplying of Self drilling /self tapping aluminium screws (Xylan) of size (5.5x 55 mm) with EPDM seal of good quality and approved make as approved by the Engineer-in-charge.