Jal Jivan Mission Electrification Work

Amount

HT Metering of GLR4 at village Lori, Water Supply scheme (Patwadh gram samuh payjal yojna ) Emerging feeder HeadQuarter -1 At substation 33/11KV Chhapka tapped on HeadQuarter-1

CENTRALIZED MATERIALS

ST Pole 11 Mtr. Long

3x120 sq mm. 11 kv XLPE cable

Stay loop insulater

3 PHASE 4 WIRE STATIC TV METER 11KV

11 KV PILFER PROOF METERING CUBICAL CT 150/5Amp

11 KV CT/PT Metering pole Mounted unit 150/5 Amp

Supply of DE-CENTRALIZED MATERIALS (Provided By Contactor)

Top Channel MS 100x50x2240 mm Long

M.S. Channel 125x65x1300 mm (T-off)

M.S.Channel Dropper100x50x6mm 2028mm Long

stay wire 7/8 swg

Stay Complete

Earthing Complete

GS/GI Earth wire 6swg

Cross bracing M.S. Angle

3x120 sq mm.11 kv cable jointing kit

MS angle 75x75x2028MM Long(cvt base)

Danger Board With Nut & Botlts

Stone Pade (300x300x75)mm

Barbed Wire

Top ,T- Off & Cross Brassing Asngle Clamp With Nut & Bolt

Nut & Bolt with washer

Number Plate with clamp

Work of following materials as per RESPO/PuVVNL norms at the work site.

Erection of Single pole structure on 11 mtr. ST Pole including all works of excavation of pit, pole erection, grouting in the ratio 1 : 4 : 8 (cement, sand, 40mm brick ballast) back filling of earth, proper ramming & fitting of all accessories ('V' type cross arm clamps with bolt and nut, Channel-bracket, composite polymer pin, insulator, danger board with clamp, Pole no. painting,earthing, barbed wire, painting of pole with painr, making of plinth around ST Pole etc. complete)

Erection of Double Pole structure on 11 mtr. ST Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories For Single Circuit (M.S. angle iron bracing with clamps, top channel with clamps, disc insulator T & C type, disc fitting T & C type, composite polymer pin, insulator, P.G. Clamp, 'E' bracket, danger board with clamp,pole no. painting, barbed wire earthing, grouting of Stay Rod including all work as per norms etc. complete).

Grouting of Stay Rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Fixing of T-off Channel with clamp including related items

Other small works to complete the line as per requirement.

Hard Rock broken

Bounding of Barbed wire with Denger Board at PCC/ST Pole

11 KV 3x120 sq.mm. XLPE Cable Laying Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

Making 11 KV Cable Jointing Kit with 11 KV with 3x120/3x185 sq.mm.

Installtion of 11 KV PPMC, 3 Phase 4 wire static TV Meter & CT/PT Unit

11 KV 3x120 sq.mm. XLPE Cable Laying between PPMC & 11 KV CT/PT Metering Pole mounting unit, Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

for 11 KV HT Line/ feeder of GLR-5 at village Genguar, Water Supply scheme (Patwadh gram samuh payjal yojna ) Emerging feeder HeadQuarter -1 At substation 33/11KV Hydel

CENTRALIZED MATERIALS

ST Pole 11 Mtr. Long

3x120 sq mm. 11 kv XLPE cable

11K.V. Disc Insulator

11 kv disc fitting

11K.V.Pin with nut

11K.V.Pin Insulator

A.C.S.R Weasel Conductor

stay loop insulater

200/100/5A Outgoing 11KV VCB panel

3 PHASE 4 WIRE STATIC TV METER 11KV

11 KV PILFER PROOF METERING CUBICAL CT 150/5Amp

11 KV CT/PT Metering pole Mounted unit 150/5 Amp

Supply of DE-CENTRALIZED MATERIALS (Provided By Contactor)

Top Channel MS 100x50x2240 mm Long

M.S. Channel 125x65x1300 mm (T-off)

M.S.Channel Dropper100x50x6mm 2028mm Long

X Arm M. S. Angle V-Type

stay wire 7/8 swg

Stay Complete

Earthing Complete

GS/GI Earth wire 6swg

Cross bracing M.S. Angle

GI wire 8swg for guarding

3x120 sq mm.11 kv cable jointing kit

Cable Jointing Kit Straigst through 11 KV 120 sq.mm.

PG Clamp For Conductor with Nut & Bolt

MS angle for guarding

MS angle 75x75x2028MM Long(cvt base)

Cross Arm Holding Clamp With Nut & Bolt

Danger Board With Nut & Botlts

Stone Pade (300x300x75)mm

Barbed Wire

Top ,T- Off & Cross Brassing Asngle Clamp With Nut & Bolt

F Bracket

Nut & Bolt with washer

Number Plate with clamp

Work of following materials as per RESPO/PuVVNL norms at the work site.

Erection of Single pole structure on 11 mtr. ST Pole including all works of excavation of pit, pole erection, grouting in the ratio 1 : 4 : 8 (cement, sand, 40mm brick ballast) back filling of earth, proper ramming & fitting of all accessories ('V' type cross arm clamps with bolt and nut, Channel-bracket, composite polymer pin, insulator, danger board with clamp, Pole no. painting,earthing, barbed wire, painting of pole with painr, making of plinth around ST Pole etc. complete)

Erection of Double Pole structure on 11 mtr. ST Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories For Single Circuit (M.S. angle iron bracing with clamps, top channel with clamps, disc insulator T & C type, disc fitting T & C type, composite polymer pin, insulator, P.G. Clamp, 'E' bracket, danger board with clamp,pole no. painting, barbed wire earthing, grouting of Stay Rod including all work as per norms etc. complete).

Grouting of Stay Rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, including supply, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.

Chopping of branches of trees along the route of the line and disposal of the same at suitable place.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Weasal conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Fixing of T-off Channel with clamp including related items

Other small works to complete the line as per requirement.

Road restoration charges for pucca road crossing

Bounding of Barbed wire with Denger Board at PCC/ST Pole

11 KV 3x120 sq.mm. XLPE Cable Laying Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

Making 11 KV Cable Jointing Kit with 11 KV 3x120/3x185 sq.mm.

Making 11 KV Cable Jointing Kit with 11 KV Straight Through 3x120/3x185 sq.mm.

Installtion of 11 KV PPMC, 3 Phase 4 wire static TV Meter & CT/PT Unit

11 KV 3x120 sq.mm. XLPE Cable Laying between PPMC & 11 KV CT/PT Metering Pole mounting unit, Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

for 11 KV HT Line/ feeder of GLR-6 at village Kekrahi, Water Supply scheme (Patwadh gram samuh payjal yojna ) Emerging At substation 33/11KV Pasahi

CENTRALIZED MATERIALS

ST Pole 11 Mtr. Long

3x120 sq mm. 11 kv XLPE cable

11K.V. Disc Insulator

11 kv disc fitting

11K.V.Pin with nut

11K.V.Pin Insulator

A.C.S.R Weasel Conductor

stay loop insulater

3 PHASE 4 WIRE STATIC TV METER 11KV

11 KV PILFER PROOF METERING CUBICAL CT 150/5Amp

11 KV CT/PT Metering pole Mounted unit 150/5 Amp

3x70 sq mm. 11 kv XLPE cable

Supply of DE-CENTRALIZED MATERIALS (Provided By Contactor)

Top Channel MS 100x50x2240 mm Long

M.S. Channel 125x65x1300 mm (T-off)

M.S.Channel Dropper100x50x6mm 2028mm Long

X Arm M. S. Angle V-Type

stay wire 7/8 swg

Stay Complete

Earthing Complete

GS/GI Earth wire 6swg

Cross bracing M.S. Angle

GI wire 8swg for guarding

3x120 sq mm.11 kv cable jointing kit

3x70 sq mm.11 kv cable jointing kit

PG Clamp For Conductor with Nut & Bolt

MS angle for guarding

MS angle 75x75x2028MM Long(cvt base)

Cross Arm Holding Clamp With Nut & Bolt

Danger Board With Nut & Botlts

Stone Pade (300x300x75)mm

Barbed Wire

Top ,T- Off & Cross Brassing Asngle Clamp With Nut & Bolt

F Bracket

Nut & Bolt with washer

Number Plate with clamp

GI Pipe 6" Dia

Work of following materials as per RESPO/PuVVNL norms at the work site.

Erection of Single pole structure on 11 mtr. ST Pole including all works of excavation of pit, pole erection, grouting in the ratio 1 : 4 : 8 (cement, sand, 40mm brick ballast) back filling of earth, proper ramming & fitting of all accessories ('V' type cross arm clamps with bolt and nut, Channel-bracket, composite polymer pin, insulator, danger board with clamp, Pole no. painting,earthing, barbed wire, painting of pole with painr, making of plinth around ST Pole etc. complete)

Erection of Double Pole structure on 11 mtr. ST Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories For Single Circuit (M.S. angle iron bracing with clamps, top channel with clamps, disc insulator T & C type, disc fitting T & C type, composite polymer pin, insulator, P.G. Clamp, 'E' bracket, danger board with clamp,pole no. painting, barbed wire earthing, grouting of Stay Rod including all work as per norms etc. complete).

Grouting of Stay Rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Guarding between two poles (Span) like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, including supply, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Weasal conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Fixing of T-off Channel with clamp including related items

Other small works to complete the line as per requirement.

Road restoration charges for pucca road crossing

Bounding of Barbed wire with Denger Board at PCC/ST Pole

11 KV 3x120 sq.mm. XLPE Cable Laying Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

Making 11 KV Cable Jointing Kit with 11 KV 3x/70/3x120/3x185 sq.mm.

Installtion of 11 KV PPMC, 3 Phase 4 wire static TV Meter & CT/PT Unit

11 KV 3x70 sq.mm. XLPE Cable Laying between PPMC & 11 KV CT/PT Metering Pole mounting unit, Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

for 11 KV HT Line/ feeder of GLR-7 at village Papi, Water Supply scheme (Patwadh gram samuh payjal yojna ) Emerging At substation 33/11KV Pasahi

CENTRALIZED MATERIALS

ST Pole 11 Mtr. Long

3x120 sq mm. 11 kv XLPE cable

11K.V. Disc Insulator

11 kv disc fitting

11K.V.Pin with nut

11K.V.Pin Insulator

A.C.S.R Weasel Conductor

stay loop insulater

3 PHASE 4 WIRE STATIC TV METER 11KV

11 KV PILFER PROOF METERING CUBICAL CT 150/5Amp

11 KV CT/PT Metering pole Mounted unit 150/5 Amp

DE-CENTRALIZED MATERIALS

Top Channel MS 100x50x2240 mm Long

M.S. Channel 125x65x1300 mm (T-off)

M.S.Channel Dropper100x50x6mm 2028mm Long

X Arm M. S. Angle V-Type

stay wire 7/8 swg

Stay Complete

Earthing Complete

GS/GI Earth wire 6swg

Cross bracing M.S. Angle

GI wire 8swg for guarding

3x120 sq mm.11 kv cable jointing kit

PG Clamp For Conductor with Nut & Bolt

MS angle for guarding

MS angle 75x75x2028MM Long(cvt base)

Cross Arm Holding Clamp With Nut & Bolt

Danger Board With Nut & Botlts

Stone Pade (300x300x75)mm

Barbed Wire

Top ,T- Off & Cross Brassing Asngle Clamp With Nut & Bolt

F Bracket

Nut & Bolt with washer

Number Plate with clamp

Work of following materials as per RESPO/PuVVNL norms at the work site.

Erection of Single pole structure on 11 mtr. ST Pole including all works of excavation of pit, pole erection, grouting in the ratio 1 : 4 : 8 (cement, sand, 40mm brick ballast) back filling of earth, proper ramming & fitting of all accessories ('V' type cross arm clamps with bolt and nut, Channel-bracket, composite polymer pin, insulator, danger board with clamp, Pole no. painting,earthing, barbed wire, painting of pole with painr, making of plinth around ST Pole etc. complete)

Erection of Double Pole structure on 11 mtr. ST Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories For Single Circuit (M.S. angle iron bracing with clamps, top channel with clamps, disc insulator T & C type, disc fitting T & C type, composite polymer pin, insulator, P.G. Clamp, 'E' bracket, danger board with clamp,pole no. painting, barbed wire earthing, grouting of Stay Rod including all work as per norms etc. complete).

Grouting of Stay Rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Guarding between two poles (Span) like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, including supply, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.

Chopping of branches of trees along the route of the line and disposal of the same at suitable place.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Weasal conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Fixing of T-off Channel with clamp including related items

Other small works to complete the line as per requirement.

Hard Rock broken

Bounding of Barbed wire with Denger Board at PCC/ST Pole

11 KV 3x120 sq.mm. XLPE Cable Laying Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

Making 11 KV Cable Jointing Kit with 11 KV 3x120/3x185 sq.mm.

Installtion of 11 KV PPMC, 3 Phase 4 wire static TV Meter & CT/PT Unit

11 KV 3x120 sq.mm. XLPE Cable Laying between PPMC & 11 KV CT/PT Metering Pole mounting unit, Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

for 11 KV HT Line/ feeder of GLR-8 at village ATRAULI RAJA, Water Supply scheme (Patwadh gram samuh payjal yojna ) Emerging At substation 33/11KV Sukrit

CENTRALIZED MATERIALS

ST Pole 11 Mtr. Long

3x120 sq mm. 11 kv XLPE cable

11K.V. Disc Insulator

11 kv disc fitting

11K.V.Pin with nut

11K.V.Pin Insulator

A.C.S.R Weasel Conductor

stay loop insulater

3 PHASE 4 WIRE STATIC TV METER 11KV

11 KV PILFER PROOF METERING CUBICAL CT 150/5Amp

11 KV CT/PT Metering pole Mounted unit 150/5 Amp

DE-CENTRALIZED MATERIALS

Top Channel MS 100x50x2240 mm Long

M.S. Channel 125x65x1300 mm (T-off)

M.S.Channel Dropper100x50x6mm 2028mm Long

X Arm M. S. Angle V-Type

stay wire 7/8 swg

Stay Complete

Earthing Complete

GS/GI Earth wire 6swg

GI wire 8swg for guarding

3x120 sq mm.11 kv cable jointing kit

PG Clamp For Conductor with Nut & Bolt

MS angle for guarding

MS angle 75x75x2028MM Long(cvt base)

Cross Arm Holding Clamp With Nut & Bolt

Danger Board With Nut & Botlts

Stone Pade (300x300x75)mm

Barbed Wire

Top ,T- Off & Cross Brassing Asngle Clamp With Nut & Bolt

F Bracket

Nut & Bolt with washer

Number Plate with clamp

GI Pipe 6" Dia

Work of following materials as per RESPO/PuVVNL norms at the work site.

Erection of Single pole structure on 11 mtr. ST Pole including all works of excavation of pit, pole erection, grouting in the ratio 1 : 4 : 8 (cement, sand, 40mm brick ballast) back filling of earth, proper ramming & fitting of all accessories ('V' type cross arm clamps with bolt and nut, Channel-bracket, composite polymer pin, insulator, danger board with clamp, Pole no. painting,earthing, barbed wire, painting of pole with painr, making of plinth around ST Pole etc. complete)

Erection of Double Pole structure on 11 mtr. ST Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories For Single Circuit (M.S. angle iron bracing with clamps, top channel with clamps, disc insulator T & C type, disc fitting T & C type, composite polymer pin, insulator, P.G. Clamp, 'E' bracket, danger board with clamp,pole no. painting, barbed wire earthing, grouting of Stay Rod including all work as per norms etc. complete).

Grouting of Stay Rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Guarding between two poles (Span) like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, including supply, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.

Chopping of branches of trees along the route of the line and disposal of the same at suitable place.

Shifting, loading, carriage & Laying, spreading, lifting and final sagging of 3 phases of ACSR Weasal conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Fixing of T-off Channel with clamp including related items

Other small works to complete the line as per requirement.

Hard Rock broken

Road restoration charges for pucca road crossing

Bounding of Barbed wire with Denger Board at PCC/ST Pole

11 KV 3x120 sq.mm. XLPE Cable Laying Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

Making 11 KV Cable Jointing Kit with 11 KV 3x120/3x185 sq.mm.

Installtion of 11 KV PPMC, 3 Phase 4 wire static TV Meter & CT/PT Unit

11 KV 3x120 sq.mm. XLPE Cable Laying between PPMC & 11 KV CT/PT Metering Pole mounting unit, Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

for 11 KV HT Line/ feeder of GLR-9 at village NIPRAJ, Water Supply scheme (Patwadh gram samuh payjal yojna ) Emerging At substation 33/11KV Uchadih

CENTRALIZED MATERIALS

ST Pole 11 Mtr. Long

3x70 sq mm. 11 kv XLPE cable

11K.V. Disc Insulator

11 kv disc fitting

11K.V.Pin with nut

11K.V.Pin Insulator

A.C.S.R Weasel Conductor

stay loop insulater

3 PHASE 4 WIRE STATIC TV METER 11KV

11 KV PILFER PROOF METERING CUBICAL CT 150/5Amp

11 KV CT/PT Metering pole Mounted unit 150/5 Amp

DE-CENTRALIZED MATERIALS

Top Channel MS 100x50x2240 mm Long

M.S. Channel 125x65x1300 mm (T-off)

M.S.Channel Dropper100x50x6mm 2028mm Long

X Arm M. S. Angle V-Type

stay wire 7/8 swg

Stay Complete

Earthing Complete

GS/GI Earth wire 6swg

GI wire 8swg for guarding

3x70 sq mm.11 kv cable jointing kit

PG Clamp For Conductor with Nut & Bolt

MS angle for guarding

MS angle 75x75x2028MM Long(cvt base)

Cross Arm Holding Clamp With Nut & Bolt

Danger Board With Nut & Botlts

Stone Pade (300x300x75)mm

Barbed Wire

Top ,T- Off & Cross Brassing Asngle Clamp With Nut & Bolt

F Bracket

Nut & Bolt with washer

Number Plate with clamp

Work of following materials as per RESPO/PuVVNL norms at the work site.

Erection of Single pole structure on 11 mtr. ST Pole including all works of excavation of pit, pole erection, grouting in the ratio 1 : 4 : 8 (cement, sand, 40mm brick ballast) back filling of earth, proper ramming & fitting of all accessories ('V' type cross arm clamps with bolt and nut, Channel-bracket, composite polymer pin, insulator, danger board with clamp, Pole no. painting,earthing, barbed wire, painting of pole with painr, making of plinth around ST Pole etc. complete)

Erection of Double Pole structure on 11 mtr. ST Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories For Single Circuit (M.S. angle iron bracing with clamps, top channel with clamps, disc insulator T & C type, disc fitting T & C type, composite polymer pin, insulator, P.G. Clamp, 'E' bracket, danger board with clamp,pole no. painting, barbed wire earthing, grouting of Stay Rod including all work as per norms etc. complete).

Grouting of Stay Rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Guarding between two poles (Span) like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, including supply, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.

Chopping of branches of trees along the route of the line and disposal of the same at suitable place.

Shifting, loading, carriage & Laying, spreading, lifting and final sagging of 3 phases of ACSR Weasal conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Fixing of T-off Channel with clamp including related items

Other small works to complete the line as per requirement.

Hard Rock broken

Road restoration charges for pucca road crossing

Bounding of Barbed wire with Denger Board at PCC/ST Pole

11 KV 3x70 sq.mm. XLPE Cable Laying Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

Making 11 KV Cable Jointing Kit with 11 KV 3x70/3x120/3x185 sq.mm.

Installtion of 11 KV PPMC, 3 Phase 4 wire static TV Meter & CT/PT Unit

11 KV 3x70 sq.mm. XLPE Cable Laying between PPMC & 11 KV CT/PT Metering Pole mounting unit, Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

for 11 KV HT Line/ feeder of GLR10 at village Kushahara, Water Supply scheme (Patwadh gram samuh payjal yojna ) Emerging At substation 33/11KV Shahganj

CENTRALIZED MATERIALS

ST Pole 11 Mtr. Long

3x185 sq mm. 11 kv XLPE cable

11K.V. Disc Insulator

11 kv disc fitting

11K.V.Pin with nut

11K.V.Pin Insulator

A.C.S.R Weasel Conductor

stay loop insulater

200/100/5A Outgoing 11KV VCB panel

3 PHASE 4 WIRE STATIC TV METER 11KV

11 KV PILFER PROOF METERING CUBICAL CT 150/5Amp

11 KV CT/PT Metering pole Mounted unit 150/5 Amp

DE-CENTRALIZED MATERIALS

Top Channel MS 100x50x2240 mm Long

M.S. Channel 125x65x1300 mm (T-off)

M.S.Channel Dropper100x50x6mm 2028mm Long

X Arm M. S. Angle V-Type

stay wire 7/8 swg

Stay Complete

Earthing Complete

GS/GI Earth wire 6swg

Cross bracing M.S. Angle

GI wire 8swg for guarding

3x120 sq mm.11 kv cable jointing kit

PG Clamp For Conductor with Nut & Bolt

MS angle for guarding

MS angle 75x75x2028MM Long(cvt base)

Cross Arm Holding Clamp With Nut & Bolt

Danger Board With Nut & Botlts

Stone Pade (300x300x75)mm

Barbed Wire

Top ,T- Off & Cross Brassing Asngle Clamp With Nut & Bolt

F Bracket

Nut & Bolt with washer

Number Plate with clamp

GI Pipe 6" Dia

Work of following materials as per RESPO/PuVVNL norms at the work site.

Erection of Single pole structure on 11 mtr. ST Pole including all works of excavation of pit, pole erection, grouting in the ratio 1 : 4 : 8 (cement, sand, 40mm brick ballast) back filling of earth, proper ramming & fitting of all accessories ('V' type cross arm clamps with bolt and nut, Channel-bracket, composite polymer pin, insulator, danger board with clamp, Pole no. painting,earthing, barbed wire, painting of pole with painr, making of plinth around ST Pole etc. complete)

Erection of Double Pole structure on 11 mtr. ST Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories For Single Circuit (M.S. angle iron bracing with clamps, top channel with clamps, disc insulator T & C type, disc fitting T & C type, composite polymer pin, insulator, P.G. Clamp, 'E' bracket, danger board with clamp,pole no. painting, barbed wire earthing, grouting of Stay Rod including all work as per norms etc. complete).

Grouting of Stay Rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Guarding between two poles (Span) like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, including supply, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.

Chopping of branches of trees along the route of the line and disposal of the same at suitable place.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Weasal conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Fixing of T-off Channel with clamp including related items

Other small works to complete the line as per requirement.

Hard Rock broken

Road restoration charges for pucca road crossing

Bounding of Barbed wire with Denger Board at PCC/ST Pole

11 KV 3x185 sq.mm. XLPE Cable Laying Digging of trench size 0.75x75 mtr & putting layer of sand of bottom & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

Making 11 KV Cable Jointing Kit with 11 KV 3x120/3x185 sq.mm.

Installtion of 11 KV PPMC, 3 Phase 4 wire static TV Meter & CT/PT Unit

11 KV 3x120 sq.mm. XLPE Cable Laying between PPMC & 11 KV CT/PT Metering Pole mounting unit, Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

for 11 KV HT Line/ feeder of GLR11 at village JOGANI, Water Supply scheme (Patwadh gram samuh payjal yojna ) Emerging At substation 33/11KV Ghorawal

CENTRALIZED MATERIALS

ST Pole 11 Mtr. Long

3x70 sq mm. 11 kv XLPE cable

11K.V. Disc Insulator

11 kv disc fitting

11K.V.Pin with nut

11K.V.Pin Insulator

A.C.S.R Weasel Conductor

stay loop insulater

3 PHASE 4 WIRE STATIC TV METER 11KV

11 KV PILFER PROOF METERING CUBICAL CT 150/5Amp

11 KV CT/PT Metering pole Mounted unit 150/5 Amp

DE-CENTRALIZED MATERIALS

Top Channel MS 100x50x2240 mm Long

M.S. Channel 125x65x1300 mm (T-off)

M.S.Channel Dropper100x50x6mm 2028mm Long

X Arm M. S. Angle V-Type

stay wire 7/8 swg

Stay Complete

Earthing Complete

GS/GI Earth wire 6swg

GI wire 8swg for guarding

3x70 sq mm.11 kv cable jointing kit

PG Clamp For Conductor with Nut & Bolt

MS angle for guarding

MS angle 75x75x2028MM Long(cvt base)

Cross Arm Holding Clamp With Nut & Bolt

Danger Board With Nut & Botlts

Stone Pade (300x300x75)mm

Barbed Wire

Top ,T- Off & Cross Brassing Asngle Clamp With Nut & Bolt

F Bracket

Nut & Bolt with washer

Number Plate with clamp

GI Pipe 6" Dia

Work of following materials as per RESPO/PuVVNL norms at the work site.

Erection of Single pole structure on 11 mtr. ST Pole including all works of excavation of pit, pole erection, grouting in the ratio 1 : 4 : 8 (cement, sand, 40mm brick ballast) back filling of earth, proper ramming & fitting of all accessories ('V' type cross arm clamps with bolt and nut, Channel-bracket, composite polymer pin, insulator, danger board with clamp, Pole no. painting,earthing, barbed wire, painting of pole with painr, making of plinth around ST Pole etc. complete)

Erection of Double Pole structure on 11 mtr. ST Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories For Single Circuit (M.S. angle iron bracing with clamps, top channel with clamps, disc insulator T & C type, disc fitting T & C type, composite polymer pin, insulator, P.G. Clamp, 'E' bracket, danger board with clamp,pole no. painting, barbed wire earthing, grouting of Stay Rod including all work as per norms etc. complete).

Grouting of Stay Rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Guarding between two poles (Span) like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, including supply, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.

Chopping of branches of trees along the route of the line and disposal of the same at suitable place.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Weasal conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Fixing of T-off Channel with clamp including related items

Other small works to complete the line as per requirement.

Hard Rock broken

Bounding of Barbed wire with Denger Board at PCC/ST Pole

11 KV 3x70 sq.mm. XLPE Cable Laying Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

Making 11 KV Cable Jointing Kit with 11 KV 3x70/3x120/3x185 sq.mm.

Installtion of 11 KV PPMC, 3 Phase 4 wire static TV Meter & CT/PT Unit

11 KV 3x70 sq.mm. XLPE Cable Laying between PPMC & 11 KV CT/PT Metering Pole mounting unit, Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

for 11 KV HT Line/ feeder of GLR12 at village khutaha, Water Supply scheme (Patwadh gram samuh payjal yojna ) Emerging At substation 33/11KV Ghorawal

CENTRALIZED MATERIALS

ST Pole 11 Mtr. Long

3x120 sq mm. 11 kv XLPE cable

11K.V. Disc Insulator

11 kv disc fitting

11K.V.Pin with nut

11K.V.Pin Insulator

A.C.S.R Weasel Conductor

stay loop insulater

3 PHASE 4 WIRE STATIC TV METER 11KV

11 KV PILFER PROOF METERING CUBICAL CT 150/5Amp

11 KV CT/PT Metering pole Mounted unit 150/5 Amp

DE-CENTRALIZED MATERIALS

Top Channel MS 100x50x2240 mm Long

M.S. Channel 125x65x1300 mm (T-off)

M.S.Channel Dropper100x50x6mm 2028mm Long

X Arm M. S. Angle V-Type

stay wire 7/8 swg

Stay Complete

Earthing Complete

GS/GI Earth wire 6swg

GI wire 8swg for guarding

3x120 sq mm.11 kv cable jointing kit

PG Clamp For Conductor with Nut & Bolt

MS angle for guarding

MS angle 75x75x2028MM Long(cvt base)

Cross Arm Holding Clamp With Nut & Bolt

Danger Board With Nut & Botlts

Stone Pade (300x300x75)mm

Barbed Wire

Top ,T- Off & Cross Brassing Asngle Clamp With Nut & Bolt

F Bracket

Nut & Bolt with washer

Number Plate with clamp

Work of following materials as per RESPO/PuVVNL norms at the work site.

Erection of Single pole structure on 11 mtr. ST Pole including all works of excavation of pit, pole erection, grouting in the ratio 1 : 4 : 8 (cement, sand, 40mm brick ballast) back filling of earth, proper ramming & fitting of all accessories ('V' type cross arm clamps with bolt and nut, Channel-bracket, composite polymer pin, insulator, danger board with clamp, Pole no. painting,earthing, barbed wire, painting of pole with painr, making of plinth around ST Pole etc. complete)

Erection of Double Pole structure on 11 mtr. ST Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories For Single Circuit (M.S. angle iron bracing with clamps, top channel with clamps, disc insulator T & C type, disc fitting T & C type, composite polymer pin, insulator, P.G. Clamp, 'E' bracket, danger board with clamp,pole no. painting, barbed wire earthing, grouting of Stay Rod including all work as per norms etc. complete).

Grouting of Stay Rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Guarding between two poles (Span) like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, including supply, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.

Chopping of branches of trees along the route of the line and disposal of the same at suitable place.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Weasal conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Fixing of T-off Channel with clamp including related items

Other small works to complete the line as per requirement.

Hard Rock broken

Road restoration charges for pucca road crossing

Bounding of Barbed wire with Denger Board at PCC/ST Pole

11 KV 3x120 sq.mm. XLPE Cable Laying Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

Making 11 KV Cable Jointing Kit with 11 KV 3x120 sq.mm.

Installtion of 11 KV PPMC, 3 Phase 4 wire static TV Meter & CT/PT Unit

11 KV 3x120 sq.mm. XLPE Cable Laying between PPMC & 11 KV CT/PT Metering Pole mounting unit, Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

for 11 KV HT Line/ feeder of GLR14 at village SIRSAI, Water Supply scheme (Patwadh gram samuh payjal yojna ) Emerging At substation 33/11KV Ghuwas

CENTRALIZED MATERIALS

ST Pole 11 Mtr. Long

3x70 sq mm. 11 kv XLPE cable

11K.V. Disc Insulator

11 kv disc fitting

11K.V.Pin with nut

11K.V.Pin Insulator

A.C.S.R Weasel Conductor

stay loop insulater

3 PHASE 4 WIRE STATIC TV METER 11KV

11 KV PILFER PROOF METERING CUBICAL CT 150/5Amp

11 KV CT/PT Metering pole Mounted unit 150/5 Amp

DE-CENTRALIZED MATERIALS

Top Channel MS 100x50x2240 mm Long

M.S. Channel 125x65x1300 mm (T-off)

M.S.Channel Dropper100x50x6mm 2028mm Long

X Arm M. S. Angle V-Type

stay wire 7/8 swg

Stay Complete

Earthing Complete

GS/GI Earth wire 6swg

GI wire 8swg for guarding

3x70 sq mm.11 kv cable jointing kit

PG Clamp For Conductor with Nut & Bolt

MS angle for guarding

MS angle 75x75x2028MM Long(cvt base)

Cross Arm Holding Clamp With Nut & Bolt

Danger Board With Nut & Botlts

Stone Pade (300x300x75)mm

Barbed Wire

Top ,T- Off & Cross Brassing Asngle Clamp With Nut & Bolt

F Bracket

Nut & Bolt with washer

Number Plate with clamp

Work of following materials as per RESPO/PuVVNL norms at the work site.

Erection of Single pole structure on 11 mtr. ST Pole including all works of excavation of pit, pole erection, grouting in the ratio 1 : 4 : 8 (cement, sand, 40mm brick ballast) back filling of earth, proper ramming & fitting of all accessories ('V' type cross arm clamps with bolt and nut, Channel-bracket, composite polymer pin, insulator, danger board with clamp, Pole no. painting,earthing, barbed wire, painting of pole with painr, making of plinth around ST Pole etc. complete)

Erection of Double Pole structure on 11 mtr. ST Pole including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast),back filling of earth ,proper ramming & fitting of all accessories For Single Circuit (M.S. angle iron bracing with clamps, top channel with clamps, disc insulator T & C type, disc fitting T & C type, composite polymer pin, insulator, P.G. Clamp, 'E' bracket, danger board with clamp,pole no. painting, barbed wire earthing, grouting of Stay Rod including all work as per norms etc. complete).

Grouting of Stay Rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Guarding between two poles (Span) like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, including supply, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.

Chopping of branches of trees along the route of the line and disposal of the same at suitable place.

Laying, spreading, lifting and final sagging of 3 phases of ACSR Weasal conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Fixing of T-off Channel with clamp including related items

Other small works to complete the line as per requirement.

Hard Rock broken

Road restoration charges for pucca road crossing

Bounding of Barbed wire with Denger Board at PCC/ST Pole

11 KV 3x70 sq.mm. XLPE Cable Laying Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

Making 11 KV Cable Jointing Kit with 11 KV 3x70/3x120 sq.mm.

Installtion of 11 KV PPMC, 3 Phase 4 wire static TV Meter & CT/PT Unit

11 KV 3x70 sq.mm. XLPE Cable Laying between PPMC & 11 KV CT/PT Metering Pole mounting unit, Digging of trench size 0.75x75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites top by laying bricks finely cover the same by earth.

M/S SMM INFRATECH PVT Ltd