REP / MAINT OF TOILET / BATHROOM BLOCK OF DSC GUARD POST AND CERTAIN Ioc IN TECH AREA AT AF STN MANAURI

Amount

Demolition Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M/L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:6 complete all as specified and directed.

Taking down cement plaster or cement lime plaster on brick or stone walls etc.Including raking out joints ,hacking for key, scrubbing down with water etc complete all as specified and directed.

Rendering 10mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:3 and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L white wash as in celing two coats on new surfaces complete all as specified and directed.

M&L white wash as in celing two coats on old surfaces complete all as specified and directed.

M & L for complete removal of existing treatment and apply avg th of 1 to 1.5mm wall putty on walls complete all as specified and directed.

M & L rendering 15 mm thick in cement plaster 1 : 4 with WPC (@ 200ml per cement bag) on fair faces of brick wk or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured & paid seprately.

M&L for preparing new suface and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for preparing old surface and applying two coats of cement based paint complete all as specified and directed.

Material & Labour for applying Two coats on of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm as directed by Engineer-in-Charge.

Supply only Integral waterproofing compound complete all as specified and directed.

M & L rendering 10 mm thick in cement plaster 1 : 6 and finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of New plastered surface of walls including cornices and apply three coats of white wash complete all as specified and directed.

M & L for preparation of Old plastered surface of walls including cornices and apply three coats of white wash complete all as specified and directed.

M & L for preparation of old steel surface exceeding 10 cm width or girth and apply two coat of synthetic enamel paint complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and directed .

M & L non-skid ceramic coloured tiles joint free ceramic tiles 7 to 8 mm thick size 400x400mm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed.

M & L for glazed ceramic coloured tiles 300x600 mm with colour & design as per dirceted by Engr in charge, fixed in verticle surfaces set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick in cement plaster 1 : 4 as backing coat for fixing tiles as dados, skirtings complete all as specified and directed.

S & F anodised aluminium windows and ventilators with frames, shutters provided with including jointing cleat for fixing and including all fittings like handles, locks, latches etc complete all as specified and directed. Drg No: CE (AF)/NGP/TD-109/2012, Sheet 1 to 4/4.

Taking down Chowkhats or frames with shutters not exc 1.5 sqm complete all as specified and directed.

S & F sheet glass, 5 mm thick tinted shade ordinary quality and glazing with oil putty/rubber gasket in squares and complete all as specified and directed.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick wood grain printed PVC sheet colour PVC sheet & edges will be painted to match with printed sheetplain colour PVC sheet reinforced with MS square tube complete all as specified and directed .

M & L factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet stripo of 20mm width stuck inside with solvent cement for stiles and plain colour sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, S & F in the frame at site as per specification complete all as specified and directed.

S & F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, with glazing bars, dovetailed or welded complete all as specified and directed.

M&L two Coats of synthetic enamel paint over a coat of pink primer Surfaces of any description, over 10cm in width or girth,not otherwise described in new wooden surfaces etc complete all as specified and directed .

S & F stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Aluminum anodised barrel tower bolt of extruded section and fixed 125 mm long complete all as specified and directed.

S&F extruded aluminium alloy handles, anodized 150 mm size complete all as specified and directed.

S&F 250 mm aluminium alloy, anodised,sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing boltts and sliding bolts of extrude section or cast aluminium complete all as specified and directed .

S&F in Butt hinges, heavy weight, cold rolled mild steel, and fixed 100mm long complete all as specified and directed .

S&F in repair Rotational moulded polyethylene water storage tanks tripple layered white coloured(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity 500 ltr complete all as specified and directed .

S & F in repairs ball brass valves high pressure, with polythelne float and fly nut in 20mm bore complete all as specified and directed.

M&L in repairs Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-90gms)

S & F repairs twin flush PVC valveless, syphonic action type, flushing cistern, low level, white colour capacity 10 liters with inlet and outlet, ball valve, handle including cast iron brackets & 32 mm bore PVC flush pipes & PVC connection pipe, compete all as specified and directed.

S & F in repairs Vitreous china half stall type urinal complete including providion and fixing plugs ,bedding urinal against wall in Cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws ,pointing around urinal in back of cement ,including, connecting to flushing pipe and outgoing pipe compete all as specified and directed.

S & F in repair Vitreous China wash basin, white, flat back, of size 550x450mm including brackets(flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply including CP tap,waste pipe & coupling compete all as specified and directed. Make : Cera,Hindware,Parryware etc

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), with saet cover,flushinfg piper 32mm dia for low level flushing cistern including padestal pan & trap,including connectin to drain and to flushing pipe anti syphoonaage pipe etc compete all as specified and directed.

S & F in repairs Water closet (Squatt pattern) of pattern "orissa pattern", size 580 x 440 mm white with trap and integral foot rests, complete including provision of lime concrete bedding compete all as specified and directed.

S&F in repair looking mirror fancy type decorative pattrern 5 to 6 mm thick fixed on wall with stainless steel studs compete all as specified and directed.

S&F in repair 15mm bore Bib taps, chromium plated with crutch or butterfly handle, screwed down, crewed for iron pipe or for brass ferrule and fixed all as specified and directed.

S&F in repair 15mm bore Pillar taps, chromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

S&F in repairs 110/100mm PVC (SWR) type B single socketed in any length with MS clamps joints fixed to walls complete all as specified and directed.

S & F in repairs 100 mm bore PVC (SWR) type B vent cowl, including complete all as specified and directed.

S&F in repairs 110/100mm PVC (SWR) type B bends any radius complete all as specified and directed.

S&F in repairs 75 mm PVC (SWR) type B bends any radius complete all as specified and directed.

S&F in repairs 75 PVC (SWR) type B pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S&F in repair CP Angle valve 15 mm compete all as specified and directed.

S&F in repair waste pipe for wash hand basin 32mm/40mm dia compete all as specified and directed.

S&F in repair SS Soap dish, any type, fixed to plugs with chromium plated plugs with brass screws compete all as specified and directed.

S&F in reapair CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking up or down steel tubing & connection incl cleaning for refixing or removal from site for 15 mm dia pipe complete all as specified and directed.

M & L for GI Tubing medium grade' 15 mm, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as speicified and directed.

Taking up or down steel tubing & connection incl cleaning for refixing or removal from site for 20 mm dia pipe complete all as speicified and directed.

M & L for GI Tubing medium grade' 20 mm, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as speicified and directed.

Demolition Brickwork or stone/ boulder masonry, laid dry complete all as specified and directed.

M&L for 75 mm thick hardcore of broken stone aggt. of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed.

M&L for providing 75 mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in floor, finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC1:2:4 type B-0 using 12.5mm graded stone aggregate , as in coping etc complete all as specified and directed.

M&L providing chequered cement concrete/paver blocks coloured tiles glossy finish 30cm x 30cm x 22 to 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment laid over and including screed bed or bedding layer 20 mm thick in cm 1:4 as in floors complete all as specified and directed.

Demolition of cement concrete (reinforced ) of any description and in any position compete all as specified and directed.

M & L for cement concrete 1:2:4 type B1, using 20mm graded stone agg, in covers slabs set in CM 1:6 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

M&L mild steel deformed TMT bar 10 mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W (Gde- E- 250) quality- A with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed.

S & F in repairs gypsum board 12mm thick in ceiling over and including anodised aluminium snap grid frame work for false ceiling, size of grid 605 x 605mm complete all as specified and as directed

M & L for preparation of ceiling surface and applying two coats of OBD over a 1mm coat of putty complete all as specified and directed.

Dismantling of AC (corrugated/semi corrugated) sheet/PGI/CGI in roof covering including ridges complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri

AMRESH TRADERS (BID ID -3102162)

swastik builders (BID ID -3102091)