REPAIR/ REPLACEMENT TO JOINERY, PLUMBING, TILING WORK AND OTHER ALLIED B/R ITEMS TO JCO/OR MARRIED ACCN AND OTM ACCN TO CERTAIN UNITS AT SANYAT LINE, KARAM VIHAR, TIGRIS MOUDE LINES, SUMERIAN LINES, NEW MOUDE LINES UNDER GE (EAST) DELHI CANTT-10

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed.

Refixing doors shutters in same opening any description not exc 2.0 sqm. complete all specified and directed.

Dismantling wrought iron or mild steel work any description including doors, gates etc., complete all as specified & directed.

S & F Mild Steel framed work such as in door frame, door shutters / gate of angle or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.

M&L for Mild steel work as in Hollow section, angle Iron, flat Iron for fixed indepently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attchment and curved shaped by welding (thickness of metal n.exc.6mm) making jointless by filling including cutting etc complete all as specified.

S & F 1.25 mm thick Pressed steel frames size 105 mm x 60 mm for doors with one rebates including necessary fixing lugs/ hold fasts with PCC in walls/RCC etc , 3 or 4 No's heavy MS hinges , lock strike plate, etc and including back filling with PCC in 1:3:6 (using 12.50 mm graded stone aggregate) completed all as specified & directed

S&F in repair Plastic water closet seat cover White closed pattern with recessed bottom and cover and mild steel chromium plated hinging device, or of any type as directed by Engr in charge at site as per site requieremnt complete all as specified and directed. Make : Cera/ Hindware/ Jaquar or equivalent as approved by GE.

S&F Factory made single/double shutter (leaf) extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges and other fittings of required size with necessary full body threaded star headed counter sunkS.S screws, all as per direction of Engineer-In-Charge

S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made.

S & F in replacement anodised aluminium frame (Chowkhat) for doors, windows, ventilators with Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F in replacement aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.

S & F in replacement anodised aluminium window and ventilator shutters, with Powder Coating (minimum thickness of powder coating 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 Kg/Rm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F factory made solid PVC/FRP door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC/ FRP door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I. complete all as specified and directed by Engr-in-Charge.

S & F in repair modular wardrobe, cupboards, cabinets, drawers, shelfs, vanity , dressing table incl shutters (depth of 45 cm to 70 cm) etc all front, bottom,top, two sides and partitions etc made out of 15-18mm thick WPC board and back side made out of 8-10 mm thick WPC board ( make : Rajshri or equivalent as approved by GE) with machine pressed 0.7 to 1 mm thick glossy colour laminate on all exposed front side and other sides decorative laminations. All exposed edges of board with machine pressed edges band 0.8mm from rehau germanetc incl all accessories of fittings - auto/soft closing hinges for shutters, C/J gola profile for handleless or SS handle , telescopic channels 18/20" long, rollers fro smooth sliding of drawers, magnetic catch etc all fittings complete all as specified and directed by Engr-in-charge. Note - only front face shall be measured and paid irrespective of area of WPC board provided and fittings as required shall be deemeed to be incl in the quoted rates by the contractor.

S & F in repair 100mm size butt hinges stainless steel complete all as specified and as directed.

S & F in repair 75mm size butt hinges stainless steel complete all as specified and as directed.

S & F in repair150 mm size aluminium anodised, handles cast type anodised complete all as specified and directed

S & F in repair 100 mm long aluminium handles, cast type anodised for alluminum windows complete all as specified and directed.

S & F in repair 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F in repair 250 mm long aluminium alloy, anodised siding door bolts, with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed, complete all as specified and directed.

S&F 300 mm size mild steel ordinary rat & tail rod pattern spring (Helical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed.

S&F in repair 300 mm size mild steel ordinary rat & tail rod pattern spring (Helical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed.

Hacking out old broken glass from wooden frames and steel frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads, complete all as specified and directed.

S & F 3mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F 3 mm thick figured glass , pin head type and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm normal dia of wire and average width a apparture 0.56 mm and fixed with tinned tacksor stainless steel wire staples as specified and directed.

S & F in repair stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed.

M&L mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of watertanks and similar work, complete all as specified and directed.

S & F in Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30 mm width complele all as specified and as directed.

S & F in repair aluminium anodised Hasp & Staple of size125mm safety type including bolt to hinge plate and fixed with screws

S & F 40 mm dia cupboard knobs fixed with nuts, screw and washers of mild steel bright finished, powder coated, fancy type complete all as specified and directed.

S & F 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complele all as specified and as directed.

S & F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, 140mm complele all as specified and as directed.

S & F magnetic catches for cupboard , shelves, etc, complete all as specified and directed.

75 mm size cup board locks of brass including keys set,2 levers, complete all as specified and as directed.

S & F for stainless steel 125mm long cupoard handles fixed with nut, screw and washer of stainless steel, complete all as specified and as directed.

S & F in repairs stainless steel Curtain Rod 20 mm dia with brackets fixed with stainless steel screws and including side finials and bracket/hook for fixing to wall etc complete in all aspects as specified and as directed.

M&L 4mm thick desginer ceiling board in ceiling fixed with screw as per manufactures instruction, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33 mm thick galvanized steel sheet & size T-24x32 mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 2 mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runner at 600 mm c/c to from 600 x 600 mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19 x19 mm of white colour all as per instructionand including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc including two coat of OBD over a coat of chalk whitening putty, complete all as specified and directed.

Providing and fixing GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bendingtiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, incl dismantling of old ceiling any type all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

M&L for decorative wall panelling with PVC louvered/Fluted/Plain 2D/3D wall panels with plastic and silicate mixture as the core material with inand surface with PVC foil on the top with thickness of panel 10mm to 20mm, width of 150mm to 200mm and length of 2.74/3.05 (9' or 10') meters of POLYWOOD or equivalent brand Wt of PVC pannel is 4.5 kg/sqm and PVC percentage in wall panels is more than 40% including necessary L/H/U corner profile and fillets. WPC Wall panel are termite proof , water proof and usable on the damp walls, fixed to wall/ ceiling surface as per manufacturer instruction complete all as specified and directed by Engr-in-charge. Note:The rates are inclusive of corner profiles and fillets

M & L 10-12 mm thick polymer modified readymix cement based plaster Make : Ultratech (Brand name Readiplast) complying to IS-1661-1972, IS-2250-1965, IS-2402-1963) or equivalent as approved by GE, applied in ratio as per manufacturer's instructions, on fair faces of brick masonry or concrete surfaces finished even and smooth, including taking down of existing cement or cement lime plaster of any thickness and any description on brick or stone walls including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed.

M & L 15 mm thick polymer modified readymix cement based plaster Make : Ultratech (Brand name Readiplast) complying to IS-1661-1972, IS-2250-1965, IS-2402-1963) or equivalent as approved by GE, applied in ratio as per manufacturer's instructions, on fair faces of brick masonry or concrete surfaces finished even and smooth, including taking down of existing cement or cement lime plaster of any thickness and any description on brick or stone walls including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed.

Taking down cement or lime plaster any description on brick or stone walls etc including recking out joints hacking for key scrubbing down with waters etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortor 1:4 on brick/ concrete surfaces with water proofing compound and finishing the surface even and fair without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces complete all specified and directed.

Supply only liquid water proofing compound and to mixed as per manufacturer instruction complete all as specified and directed (make : sika/fosroc or equivalent as approved by GE).

M&L for providing PMM including demolition(Polymer modified cementitious mortar) :- (i) Dry sub strate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 50 mm thickness. Note : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use. (iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer (v) To be followed by CM 1:4 complete all as specified and directed by Engr in charge.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (white or tinted) over a coat of 1mm birla white putty complete all as specified and directed.

M&L for preparation of newly plastered or unplastered wall surfaces and applying two coat of acrylic emulsion exterior quality over and including a coat of water based primer tint and pattern as approved by GE complete all as specified.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 and including demolition of old brick/ PCC block masonry complete all as specified and directed.

Demolition or cement concrete (unreinforced) of any description and in any position, complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 (40 mm graded Aggregate) as in sunkern floor , foundation, mass concrete etc allas specified and directed

M & L 25 mm Thick PCC type B-0 1:2:4 (12.5mm graded aggregate) as in flooring, under Tiles and etc all as specified and directed

Water proofing treatment to sunken floor and verticle comprises the following provisions as under:- (a) After demolition of floor & lime concrete etc removal all loose particle alongwith existing water profing treatment (any No of layer) with wire brushes and cleaning the surface with water.(b) Brushsing cement slurry with 1.2Kg/Sqm of cement duly blended with and including water proofing compound (Make -Dr Fixit). (c) 15 mm thick (average thickness) plastering in CM 1:3 mixed with WPC in sunken surface ,including wall . the corner of sunken portion shall be roounded in concave shape and adequate slope shall be maintain during plastering to accomodated sump pipe and ponding the sunken portion with water minimum 48 Hrs .(d) Applying self adhesive type APP base polymeric membrane minimum weight not less than 3.00 Kg /Sqm and mimimum 3mm thick laide over sunken floor and sides fixed with sealing compound at all joint to entire satisfaction of Engineer -in Charge .(MAKE-IWP/ STP) (e) Filling the sunken area with Brick bats or PCC 1 :7:12 as in lean concrete under floor complete all as specified and directed.

M & L for APP polymeric water proofing membrane minimum 3mm thick and weighting not less than 3.6 kg / sqm of make STP Texsa Ltd /IWL Ltd /MK Petro as approved by GE , black finished reinforced with non woven polyster matt (wt not less than 150gms/ sqm),with fusable finish laid over compatable bitumen primer at the rate of 0.35 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with a over lap of 75 mm at the sides and 100 at the ends and sealing incl applying a coat of cold emulsion bituminous primer all as per manufactur's instructions incl two coats of aluminium paint above APP membrane also incl taking down existing treatment of any type with old plaster and and preparation of surface and 15 mm thick cement screed in CM 1:4 on roof of concrete surfaces finished even and smooth without using extra cement with mixing of water proofing compound complete all as specified (WPC shall be paid seperately) complete all as specified. Note : the water proofing treatment shall be carried out by the manufacturer or their authorised applicators as approved by GE. Note - If Electric fittings/fixtures/conduits/outdoor unit/wirings are encountered on roof the same shall be rerouted before the treatment and fitted back after the completion of roof treatment. Nothing extra shall be paid on this account and the rate shall be deemed to be incl in the quoted rates by the contractor.

M & L for Non-Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick avg screed bed in CM 1:6 inclduing dismantling of the same complete all as specified and directed.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 inclduing dismantling of the same complete all as specified and directed.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 inclduing dismantling complete all as specified and directed.

Descritpion all as specified in item No 61.00 as above light shade tiles but on vertical surface such as in skirting/dado etc over and including backing coat of 10mm thick rendering CM (1:4) inclduing dismantling complete all as specified and directed.

M & L Coloured Glazed ceramic tiles in vertical surface area of each tile exc 0.06 sqm but n exc 0.36 sqm thick (as decided by Engr in charge on ground), such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over and including 10 mm thick screed bed in CM 1:4 inclduing dismantling complete all as specified and directed.

M&L for Vitrified ceramic tiles ultra charged ( dark shade) 10mm thick (square/rectangular) area of each tile exc 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified.

Desription all as per item No. 64 above but on vertical surfaces such as skirting / dados with over and including 10 mm thick CM 1:4 as in backing coat complete all as specified.

M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 10 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required complete all as specified and directed.

M & L for machine cut kota stone slab 20-22 mm thick as in flooring laid over and incl cement screed bed 20 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable tank complete all as specified and directed

S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable tank complete all as specified and directed

S&F steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces , including cutting chases , pipning in making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing or conduit pipe etc and including taking up or down old steel tubing 15 mm bore and connecetions in any postion etc complete all as specified and directed.

S&F steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed.

S & F in repair 20 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S & F in repair 15 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repair 15mm angle valves, chromium plated cast copper alloy, polished body screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15mm bore steel tubing complete all as specified & directed.

S & F in repair 15 mm bore Stop valves, cast copper alloy , fancy type , chromimum plated with long shank and cup (concealed type) both ends for iron pipe or for unions. complete all as specifed and directed.

S & F in repairs 15 mm bore bib tap chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specifed and directed.

S & F in repairs 15 mm bore bib tap (long body) ,fancy type chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specifed and directed.

S&F in repair 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. complete all as specifed and directed.

S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. Make : Hindware /Jaquar or equivalent as approved by GE.

S&F in repairs brass chromium plated wall mixture 3 in 1 system with provision for hand shower and over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed.Make : Cera/Hindware/Jaquar or equivalent as approved by GE.

S & F in repair Two way Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs, complete all as specified and as directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and directed.

S&F in repairs health faucet chromium plated brass with 1.00m CP long flexible pipe and brass chromium plate nuts, , complete all as specified and directed. Make - Cera / Hindware/ Jaquar or equivalent as approved by GE.

S & F in repair CP brass jet spray for EWC with 1 to 1.5 mtr (as reqd) long flexible stainless steel connecting pipe 15mm bore, fixed in repairs, complete all as specified and as directed.

S & F in repair SS soap dish, fixed in repairs, complete all as specified and as directed.

S & F in repair Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.

S & F in repair mild steel chromim plated Towel ring fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified and as directed.

S&F in repairs of mild steel CP towel rail 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified.

S & F in repair CP shower rose fancy type 150mm x 150mm size with 300 / 600 mm long shower arm, fixed in repair to 15mm bore pipe, complete all as specified and as directed.

S&F in repairs of 32mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, unions and cap and fixed, complete all as specified and directed.

S & F 32/40mm spring type PVC waste pipe fixed to WHB and sink (Note minimum length of each pipe should not be less than 0.80RM), fixed in repairs, complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S & F in repair stainless steel kitchen plate rack size 600mmm x 750 mm x 200 mm including fixing on wall etc, complete all as specified and directed.

S & F in repair full pedestal pattern wash hand basin, size of basin 630mm x 510mm and pedestal of 900mm long colour as approved by GE including all necessary fittings brakets, chromium plated brass waste coupling, pvc connections,waste pipe complete in all aspect etc complete all as specified and directed. (Make : hindware/cera/parryware/varmora/tocco or equivalent as approved by GE)

S & F in repair Vitreous China wash basin white with wooden cabinet/vanity type wall hung high moisture resistant with table top base or any type/size or shape as directed at site with waste coupling of CP,waste pipe complete in all aspects complete all as specified and dirtected by Engr-in-Charge. (Make : hindware/cera/parryware/varmora/tocco or equivalent as approved by GE)

S & F in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm including , chain and plug but including brackets or erecting stand including & (32 mm -45 gms/40mm-60 gms ) waste coupling of CP,waste pipe complete all as specified and dirtected by Engr-in-Charge. (Make : hindware/cera/parryware/varmora/tocco or equivalent as approved by GE)

S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) S trap/P trap , cistern,seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed. (Make : hindware/cera/parryware/varmora/tocco or equivalent as approved by GE)

S & F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm or any size (as directed by Engr in charge at site) white, with integral foot rests including flushing cistern and flush pipe complete all as specified and directed. (Make : hindware/cera/parryware/varmora/tocco or equivalent as approved by GE)

S&F in repair floor mounted Single Piece WC with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 370x670x720 mm, S Trap- 220 mm complete complete all as specified and directed (Make : hindware/cera/parryware/varmora/tocco or equivalent as approved by GE)

S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket etc complete all as specified and directed

S & F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and directed.

S & F in repair 100 /110 mm dia PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to wall completed all as specified and directed (Note : The quoted rate is inclusive of necessary scaffolding for Pipe work executed in shaft area upto the 10 storey building )

S & F repair 110 mm PVC (SWR) bends with acess door completed all as specified and directed

S&F repair 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid in trenches or in floor or in wall complete all as specifed and directed.

S & F in repair75 mm dia PVC Bends with access dooe complete all as specified and directed

S & F in repair 75 mm dia single T for PVC(SWR) pipe equal or unequal complete all as specified and directed

S & F in repair 100 mm dia single T for PVC(SWR) pipe equal or unequal complete all as specified and directed

Complete removal of existing treatment of old surface of wall and applying 1mm thick putty again sanding and appying two coats of acrylic emulsion paint interior grade over primer complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old decorated brick/concrete /plastered/un-plastered surfaces of walls pillers, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including cracks/holes in surface filling with white putty and applying two coat of white wash complete all as specified and directed.

Description all as per Item No 111.00 above but one coat of white wash on celling surafce etc complete all as specified and directed.

Material and Labour for preparation of old decorated surfaces of wall (plastered or un-plastered) including cornices, pilaster etc by brooming down with steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat distemper oil bound distemper (white or tinted) on walls complete all as specified and directed.

Description all as per Srl Item No 113 above but one coat of oil bound distemper on celling surafce etc complete all as specified and directed.

M&L for Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surfaces and applying two coat of oil bound distemper of approved shade/tint over and including one coat of 1 mm thick birla wall care putty to achieve smooth finish complete all as specified & directed.

M&L preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of tint / shade as approved complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying two coat of synthetic enamal paint of tint as approved complete all as specified and directed.

M&L for preparation of new plastered outer wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old plastered outer wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels made by wooden beads with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified including using white cement in place of grey cement for grit wash complete all as directed.Note:- This item includes use of necessary scafffolding and safety net up to G+8 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate.

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and directions of Engineer-in-charge.Note:- This item includes use of necessary scafffolding and safety net up to G+8 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate

Supply and fixing factory made prepolished chequred cement concrete coloured tiles 300mm x 300mm x 20 to 22 mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and incl 20mm thick screed bed in CM 1:4 and also incl taking down of old stone/concrete tiles complete all as specified & directed.

Providing and laying 60mm thick factory made chamfered edge prepolished cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; incl taking down of old paver block/tiling complete all as specified and directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm incl dismantling of any type of old sheet complete all as specified & directed by engr-in-charge

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape etc, cut to designed shape (Jhhallar) as directed at site fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm incl dismantling of any type of old sheet complete all as specified & directed by Engr-in-Charge

S&F for 2mm thick fibre glass reinforced translucent plain/corrugated (as directed at site by Engr in charge) sheeting fixed with coach screw and washer in roof, wall etc. including dismantling of old sheet complete all as specified.

S & F in repair 32mm dia CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed all as specified.

S & F in repair 40mm dia CP waste coupling, for WHB, with long screwed shanks and fly nuts, flange and based in red lead cement and fixed all as specified.

Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings like union/bends/tee/elbow etc and incl taking down of old pipes complete all as specified.

Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings like union/bends/tee/elbow etc and incl taking down of old pipes complete all as specified.

S&F in repair CPVC Brass Elbow fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F in repair CPVC Brass Elbow fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F in repair CPVC Brass TEE fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F in repair CPVC Brass TEE fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F in repair CPVC Brass UNION fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F in repair CPVC Brass UNION fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F in repair CPVC Brass FTA female adaptor/tee/socekt fitting suitable for CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F in repair CPVC Brass FTA female adaptor/tee/socket fitting suitable for CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 pipes complete all as specified.

S&F in repair of brass spindles (1 to 6 Number) for bib tap/angle valve/wall mixer/basin mixer etc complete all as specified.

S & F fittings like elbow/ extension nipple/ tank nipple/ tee/ union/ socket/ float valve/ ball valve or any other fitting of GI/ brass/ steel/ CP plated of any size other than as mentioned in item no 130 to 137 (as directed by site upon requirement by Engr-in-Charge) complete all as specified.

S&F in repair Door closer hydraulically regulated, aluminum (extruded section) body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg.

S&F in repair Rubber door seal 32mm wide with Aluminium strip of size 19mm wide fixed with steel machine screws with washer, complete all as specified and as directed.

M & L for cleaning of water storage tank 500-1000 L capacity and washing with mild detergent or suitable chemical without damaging the existing pipelines incl taking out the water tank and refixing the same after washing (as directed at site by Engr in charge upon requirement) complete all as specified and directed.

M & L for cleaning of water storage tank 1000-2000L capacity and washing with mild detergent or suitable chemical without damaging the existing pipelines incl taking out the water tank and refixing the same after washing (as directed at site by Engr in charge upon requirement) complete all as specified and directed.

S & F wall mounted looking mirror with cabinet type with storage (size 14 x 18 inch) as directed at site by Engr in charge complete all as specified and directed. Make : as approved by GE

Attending day to day complaint related to welder & black smith/ carpeneter/ plumber work alongwith helper for the repair to steel windows shutters, grills, doors, rolling shutters/ wooden cabinets/ plumbing & sanitary works and other related works etc including taking down, easing and refixing in the same position as reqd complete all as specified and directed. Note :- (1) the above task shall be carried out by deploying a min 01 welder having black smith skills/plumber/carpenter on day basis from 0900 hrs to 1700 hrs. (2) In case contractor fails to complete the above task as per scheduled programme a damage of Rs 500/- per day shall be deducted from his payment. 3) Necessary T&P, ladders,minor consumable viz welding rods/extras, welding machine, equipments and safety gear shall be provided by the contractor. 4) All maintenance material/accessories as reqd shall be issued from MES store to complete the maintenance task only ( as decided by Engr in charge) and dismantled old unserviceable item shall be deposited back to MES store yard. (5) The above work /task will also include for High rise bldgs and shaft area of high rise bldgs. Note : Rates quoted shall be deem including the followings: - (a) The work mentioned in all the items as above may be carried out in multistorey bldg (upto any storey) which may require scaffolding or Jhulla arrangements or any other T&P items which are deemed to be included in the quoted rates by the contractor. (b) All debris obtained from demolition/dismantling the items of any kind or type shall be removed from the site at daily basis or as directed to avoid any seepage/leakage from roof slab or any portion anywhere and deposited the debris out of the MOD land.