REPAIR TO SUNKEN AND CAPILLARY TREATMENT AND ASSOCIATED WORKS AT KALUCHAK MIL STN UNDER GE KALUCHAK

Amount

M&L for sunken treatment with glass fiber reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent) complete all as following :- Base Coat : Berger HS Latex plus (or equivalent) consumption base coat : 0.3 kg/m2 Reinforcement : Glass fiber Second and Third coat : Latex sheild 2K (or equivalent) Consumption top coat : 3 kg/m2 System reqquirements : density : 2.00 kg/ltr; Compressive strength: 0.5N/mm2 Wall penetration through the RCC slab must be sealed using Berger HS Repair (or equivalent). Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus (or equivalent) modified mortar with a bonding coat of Berger HS Latexplus (or equivalent) modified cement slurry upto sft. All depressions, unevenness, surface honeycombng shal be repaired using Berger HS Latex plus (or equivalent) modifiled polymer mortar with a bonding coat of Berger HS latex plus (or equivalent) modified cement slurry. Including cleaning of RCC surface to remove dust, loose paricles, etc with compressed air or any other suitable technique depending on site conditions, grinding aby sharp edges, etc. Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'CD' on page no. 87 of tender documents as per Sch 'A' Note No 19 Page No 17). Non uploading of MOU by the bidder shall lead to rejection of bid during technical evaluation.

M & L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished even and smooth (without using extra cement)complete all as specified and directed.

Supply only water proofing compound ( (Liquid) complete all as specified.

M & L for20 mm dia high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid as spout pipes to pour out residual water out from the treated area complete all as specified and directed.

M & L for hard core to a gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders as in sub base complete all as specified and directed

M & L for cement concrete 1:4:8 type D-2, using 40 mm graded stone aggregate as in foundations, filling and mass concrete in sub base complete all as specified and directed.

M & L for 25 mm thick(average thickness) PCC 1:2:4, nominal mix, type B-1, using 20 mm graded crushed stone aggregate as in floor,by maintaing required gradient/undulation ,rough finished to receive tiles complete all as specified and directed.

M & L Non - skid ceramic coloured tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skirtigs/dados etc. set and jointed and pointed with Berger HS tile adhesive anti slip white @1.2 Kg/Sqm thickness up to 8 to 10mm (or equivalent) and epoxy material for sealing of tile joints with Berger HS epoxy tile grout (or equivalent) to the floor of toilets and bathrooms complete all as specified and directed.

Demolition of cement concrete (un-reinforced) below or above ground floor and pavings not exc. 15 cm thick complete all as specified and directed.

Dismantling floor, hearth or wall tiling, terrazo topping on floor/walls including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M & L for Glazed ceramic coloured tiles in vertical surface 300x 450x 7 mm ,on ventical surfaces as in skriting , dado set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 10mm thick rendering in CM 1:4 complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connection, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connection, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 20 mm nominal bore of unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with and including all fitting (such as bends, elbows, tees, short pieces connectors, back nuts, diminishing pieces, capas, plugs and union etc) complete all as specified and directed.

S&F 15 mm nominal bore of unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe with and including all fitting (such as bends, elbows, tees, short pieces connectors, back nuts, diminishing pieces, capas, plugs and union etc) complete all as specified and directed.

S&F in repair fancy type 15 mm dia agnle stop valve/stop cock with flange, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, externally threaded, screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and directed .

S & F in repair 15 mm bore chromium plated, bib tap, cast copper alloy with capstan heads, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F of 15 mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair fancy type 15mm stop cock with flange, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and directed

S&F in repair fancy type angular stop cock with flange, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, externally threaded, screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and directed .

S & F of 125mm chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union size 125 mm complete all as specified and directed.

S & F in repairs 600 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (Pedestal pattern) and trap (excluding) fixing bolts,flushing cistern and flush pipe including connection to drain (or outgoing pipe) including plastic seat cover suitable for water closet pedestal pan, coloured closed pattern with flat bottom and cover and mid steel chromium plated or aluminium hinges devices complete all as specified and directed complete all as specified and directed.

S & F in repairs water closet vitreous china squatting pan ‘Orrisa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in lime concrete bedding (one lime, two sand or surkhi and 5 aggregate) minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes complete including making good floor complete all as specified and directed.

S & F in repair polymer white (polypropylene Delrin and ABS) low level flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, flush pipe, brass screws, handle etc complete having BIS description mark with IS: 7231 with and including 32 mm bore PVC flush pipe of suitable length complete all as specified and directed.

S & F of 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Dismantling cast iron, pvc or reinfored concrete drain pipes fo 75/100mm dia, fixed with walls or taking out of trenches , if required complete all as specified & directed.

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to wall including clamps complete all as specified and directed.

S & F in repair of 110 mm bore single socketed PVC (SWR) bend any length with rubber ring joints fixed to walls complete including supply and fixing clamps etc with nuts and bolts all as specified and directed.

S & F of 110 mm bore PVC (SWR) branch piece,single (single Y) equal or unequal complete all as specified and directed

S & F of 110 mm bore PVC (SWR) junction single, (Single ‘T’) equal or unequal complete all as specified and directed

S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to wall including clamps complete all as specified and directed.

S & F in repair of 75 mm bore single socketed PVC (SWR) bend any length with rubber ring joints fixed to walls complete including supply and fixing clamps etc with nuts and bolts all as specified and directed.

S & F of 75 mm bore PVC (SWR) branch piece,single (single Y) equal or unequal complete all as specified and directed

S & F of 75 mm bore PVC (SWR) junction single, (Single ‘T’) equal or unequal complete all as specified and directed

S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F in repair brass chromium plated standard quality jet system suitable for European water closet complete all as specified and directed.

S&F of in repair chromium plated brass hand ablution health fauset with 1.50 meter long flexible tube fancy type with necessary brass nuts & rubber washers cover with chromium plated spring complete all as specified and directed.

M & L for complete removal of existing treatment, preparing the wall surfaces and applying two coat of oil bound distemper over a coat of 1 mm thick birla wall care putty complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M&L for capilary rise treatment of walls as following :- Base coat: Berger HS Latex plus (or equivalent) Consumption base coat: 0.3 kg/m2 Second and Third coat: Latex sheild 2K (or equivalent) Consumption top coat: 3 kg/m2 System requirements: density: 2.00 kg/ltr Compressive strength: 0.5 N/mm2 Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'AB' on page no. 83 of tender documents as per Sch 'A' Note No 19 Page No 17). Non uploading of MOU by the bidder shall lead to rejection of bid during technical evaluation.

M & L for 15 mm thick rendering on fair faces of brick work or concrete wall surfaces with cement mortar 1:4 using water proofing compound as per manufacturer's instructions, finished even and smooth (without using extra cement)complete all as specified and directed.

S & F of rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or steel hanging door fitting and also fastening complete all as specified and directed.

S & F of 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F of 300 mm long (Length of bolt) Stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F of 200 mm long Stainless steel, barrel tower bolt of extruded section complete all as specified and directed.

S & F of 140 mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S & F of door cill for panelled or glazed/gauzed shutter, fixed at bottom with screws, complete all as specifed & directed.

M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S & F of 150 mm long aluminium powder coated barrel tower bolt of extruded section complete all as specified and directed.

S&F of Stainless steel designer handle (heavy duty) of 150mm size, fixed to drawers or cupboard shutters, complete all as specified & directed.

S & F for Vitrified light shade Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed layer in cement mortar 1:4 complete all as specified and directed.

S & F for Vitrified light shade Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as on vertical surface of wall such as skirting, dado, riser etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

M & L for 18 – 20 mm thick machine cut black granite stone slab as in wall or vertical surface, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including necessary cutting, grinding, rubbing, polishing rounding to exposed edges and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for complete removal of existing treatment, preparing the wall surfaces and applying two coat of oil bound distemper over a coat of 1 mm thick birla wall care putty complete all as specified and directed.

S&F in repair brass CP mixer for mixing hot & cold water screwed down for 15 mm dia bore GI pipe complete all as specified and directed.

M & L Non - skid Ceramic joint free coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed layer in cement mortar 1:4 complete all as specified and directed.

M & L Non - skid Ceramic joint free coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed.

JK BUILDERS AND DEVELOPERS (BID ID -3335115)

AKSHAY CONSTRUCTION COMPANY (BID ID -3335172)