Signage, Reception and Room interior arrangements in 250 Bedded Hostel at Perumugai

Structural Glazing: Providing and fixing structural glazing fabricated from roll formed sections made of galvanized steel colour coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 grams / sqm.) with total coated thickness of 0.72mm. The glass holding section made of 304 grade SS of 0.60mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel / powder coated sections as per the design requirement. Design calculations are made to suit wind pressures as given in IS 875.

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specifications as directed by the departmental officer.(M-0658)

Providing, assembling and supplying of laminated glass panels for SKYLIGHT using heat Strengthened clear Glass and toughened glass sandwiched using 1.52PVB layer. The Glass of approved colour, size and shape as required shade all complete for the required performance , as directed by the Engineer - in - Charge. The heat strengthened clear glass having properties as U value of 4.20 to 5.50 W/m2 or lower degree K etc., Solar heat gain coefficient less than or equal to 0.35. The sandwich panels shall be assembled in the factory/ workshop of the glass processor. The certificate obtained from approved agency should be produced for heat soak test for clear glass. For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm

Supply and fixing of Vox false ceiling includes providing and installing specified Vox panels and the grid suspension system with necessary accessories. Installation involves levelling and securing the grid, then fitting the Vox panels so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, transportation, conveyance, etc., complying to standard specifications.

Supplying and fixing of brass name plate 2mm thick with embossing the letters of all fonts and sizes etc., complete as per the direction of the departmental officers

The supply and installation of UPVC partitions with doors shall utilize UPVC profile sections with an outer wall thickness of 2.30mm (±0.2mm), featuring an outer frame of 74mm x 60mm x 56mm, a shutter of 104mm x 60mm x 66mm, a mullion of 72mm x 60mm x 36mm, a glazing bead of 35mm x 18mm, a 20mm multi-chambered hollow uPVC panel section of 150mm x 20mm, and a uPVC panel bead of 19mm x 16mm. All profiles of frames, sash, and mullion shall be reinforced, where required, with 1mm thick GI steel sections. The door will be equipped with 3D hinges for enhanced weight holding capacity, and security devices such as multipoint lock systems with a cylinder lock facilitated handle, all compliant with relevant specifications and departmental directives. Glazing or UPVC panels shall be 5mm thick Plain Toughened or UPVC panel grip, held by TPE (Grey) weather-sealed gaskets. All corners and mullion joints of the frame and sash shall be mitred cut and fusion welded without mechanical joints, with all welded joints neatly trimmed to a grooved nib finish, ensuring the finished products are free from sharp edges. The complete units shall be fixed into pre-finished openings by drilling and fastening through the outer frame using high-quality fasteners, and silicon sealant shall be applied to fill the gap between the wall and the frame for a leak proof installation and completion etc., Complete and as directed by the department officers.

Supply, Installing, Testing and Commissioning of electrical cabling works for cable / wires a make of polycab / sunflex / century / Equivalent. The Electrical cable wires are filteration media feed pump, 4 core cable pump to electrical control panel. The rate inclusive of cost of all materials, transportation as applicable and supply to worksite etc.,

Supplying and fixing of Toilet Niche of size 600 mm x 300 mm made up of granite slab and including nosing and fixing charges complying with standard specifications.

Please Enable Macros to View BoQ information