GE/CHM-40/2022-2023 REPAIR POLISHING AND RECANNING TO WOODEN / STEEL FURNITURE INCLUDING COMMAND HOSPITAL UNDER BSO GE CHANDIMANDIR

Amount

TABLE BED SIDE STEEL (FD/E6/MAP/15) (a) Taking out old unserviceable table top and supply and fixing new top made out of 18mm thick pre-laminated particle board BWR type exterior grade covered with all around 4mm thick teak wood beading duly polished complete all as shown in drg and as directed

(b) Supply and fixing rubber shoe of white cream shade at the bottom of leg complete size and shape, fixed as in repairs complete all as shown in drg and as directed

(c) material and labour for welding to the broken places of table bed side steel not exceeding 25mm and smoothening the welded point properly complete all as shown in drg and as directed

(d) Removing unserviceable broken and worn out knobs. Supply and fixing new mild steel chromium plated knobs of 38mm dia with appropriate screw (as per sample) complete all as shown in drg and as directed

(e) Removing broken/ bad shaped locking device. Supply and fixing new locking device to match the original complete all as shown in drg and as directed

TABLE INVALID STEEL (FD-131) (a) Material and labour for preparation of old surface of table invalid steel and spray painting with one coat of synthetic enamel paint 1st quality white shade complete all as specified and directed.

(b) Supply and fixing new rubber wheel (black colour) at the bottom of leg of size and shape as shown in drg and complete all as specified after removing the old unserviceable wheel.

(c) material and labour for welding to the broken places of table invalid steel not exceeding of 25mm and smoothening the welded point properly complete all as specified and directed.

(d) Removing unserviceable worn out and dis figured stainless steel top and supply & fixing new stainless steel top bent to shape of size 900 x 520mm x 1mm thick with appropriate screws.

COUCH EXAMINATION STEEL (FD-122) (a) Removing unserviceable worn out and broken plywood from the top and supply & fixing new top of 18mm thick ply wood of size 1800 x 900mm commercial BWR quality complete all as specified and directed.

(b) Removing unserviceable worn out cushion and rexine cloth. Supply and fixing new cushion foam 32 density 100mm thick of size 1800x 900mm duly upholstered with rexine cloth of approved shade and quality complete all as specified and directed

HOT FOOD TROLLY & HOT CASE LARGE (FD-133M/363) (a) Removing unserviceable worn out outer body sheet from the Hot Food Trolly. Supply and fixing with appropriate nut and bolt new aluminum anodized sheet 18 guage bent to shape and dimensions complete all as specified and directed.

(b) Removing unserviceable worn out wheel form the hot food trolly. Supply and fixing new heavy duty ball bearing type 200mm dia rubber wheel to match the original complete all as specified and directed.

(c) Removing unserviceable and broken butt hinges from the lid and shutter of hot food trolly. Supply and fixing new aluminum anodized hinges 75mm x 20mm with appropriate screw as shown on drawing complete all as specified and directed

(d) Removing unserviceable and burnt out heating element of the hot food trolly, Supply and fixing new heating element ISI marked of 1250 Watt 230 Volt with appropriate connector and cord to match the original complete all as specified and directed.

(e) Removing unserviceable and burnt out multi stage rotary switch for heat control from the hot food trolly. Supply and fixing new multi stage rotary switch ISI marked to the original complete all as specified and directed.

Locker Steel FD- 1029 (FD-257) (a) Taking out unserviceable hasp and staple and supply and fixing new hasp and staple 75mmX40mmX3mm mild steel chromium plated to be fixed with rivets complete all as specified and directed.

b) Taking out old unserviceable aluminum handle 100mm size and supply and fixing new aluminum handle 125mm long complete all as specified and directed.

c) Taking out unserviceable hinge and supply and fixing new hinge (heavy duty) 75mm long to be fixed by welding complete all as specified and directed.

d) Taking out unserviceable leg and supply and fixing new leg made of 1mm thick PBI Sheet with and including gas welding as per shape and size as shown on drg including two coats of spray painting with synthetic enamel paint of approved shade over one coat of red oxide primer including preparation of new steel surface complete all as specified and directed.

Almirah Medium wooden (FD-68) (a) Material and labour for removing unserviceable tops from the following Almirah medium wooden. Supply and fixing new almirah tops made of hard teak wood planks Ist class hardwood teak of size 36"x18"x25mm planks hard wood teak finish and fixing the same with the existing almirah top with suitable screw and duly polished Complete all as specified and directed.

(b) All as per serial item No 6(a) before but supply and fixing in replacement teak wood planks front door for almirah size 55.5” x 17.5” x 25mm –ditto-.

(c) All as per serial item No 6(a) before but supply and fixing in replacement teak wood planks shelf for almirah size 34” x 16” x 25mm –ditto-.

(d) All as per serial item No 6(a) before but supply and fixing in replacement teak wood planks bottom for almirah size 36” x 18” x 25mm –ditto-.

(e) All as per serial item No 6(a) before but supply and fixing in replacement teak wood planks side shutter for almirah size 60” x 18” x 25mm –ditto-.

(f) All as per serial item No 6(a) before but supply and fixing in replacement teak wood planks back side for almirah size 60” x 36” x 25mm –ditto-.

Almirah Large wooden with shelves (F-214) (a) Material and labour for removing unserviceable tops from the following Almirah large wooden. Supply and fixing new almirah tops made of hard teak wood planks Ist class hardwood teak of size 42"x18"x25mm planks hard wood teak finish and fixing the same with the existing almirah top with suitable screws and duly polished Complete all as specified and directed.

(b) All as per serial item No 7(a) before but supply and fixing in replacement teak wood planks front door for almirah size 67.5” x 20.5” x 25mm –ditto-.

(c) All as per serial item No 7(a) before but supply and fixing in replacement teak wood planks shelf for almirah size 40” x 16” x 25mm –ditto-.

(d) All as per serial item No 7(a) before but supply and fixing in replacement teak wood planks bottom for almirah size 42” x 18” x 25mm –ditto-.

(e) All as per serial item No 7(a) before but supply and fixing in replacement teak wood planks side shutter for almirah size 60” x 18” x 25mm –ditto-.

(f) All as per serial item No 7(a) before but supply and fixing in replacement teak wood planks back side for almirah size 72” x 42” x 25mm –ditto-.

Material and labour for removing unserviceable tops from the following tables and Supply and fixing new table tops made out of 18/19mm pre-laminated particle board, one side teak finish and other side bleached and fixing the same with the existing table with suitable screw including providing PVC leaping all around to the tops complete all as shown in drg and as directed (a) Table dining 6 per

(b) Table dining 8 per

(c) Table bed side

(d) Teapoy wooden

(e) Table 3'x3'

(f) Table 3'x2' without drawer

(g) Table peg

(h) Table writing

(j) Table centre

Material and labour for polishing of following wooden furniture articles with high clean glossy finish French polish approved quality including preparation of the surfaces by putty work and smoothening the surfaces with emery paper as specified. Polish shall be done on all exposed/external surfaces remaining surfaces shall be applied with one coat of pink primer. (a) Amirah large wooden

(b) Amirah medium wooden

(c) Bed hard

(d) Bath mat wooden

(e) Book case wooden

(f) Bin soiled linen small

(g) Chair dining

(h) Chair writing

(i) Chair easy

(j) Table centre

(k) Table peg

(l) Table dining 6 pers

(m) Teapoy

(n) Table bed side

(o) Table dressing gents with mirror

(p) Table dressing ladies with mirror

(q) Table writing

(s) Table office clerk wooden

Material and labour for spray painting to following furniture articles with one coat of synthetic enamel paint of OG / Grey colour first quality , inside and outside including putty work and smoothening of surfaces complete all as specified and directed. (a) Almirah large steel with shelves

(b) Almirah medium steel with shelves

(c) Locker steel

(d) Chair CB steel with arms

(e) Chair CB steel without arms

(f) Book case glazed steel

(g) Table enviled steel

(h) Chair easy steel

(j) Chair CB Spl with hand rest

(k) Couch examination steel

(l) Table office clerk steel

(m) Table office Officers steel

(n) Table dinning OR’s

(o) Table bed side steel

(p) Rack towel steel 310 x 915mm

(q) Stool steel 305mm x 305mm x 760mm

(r) Screen movable steel 3 Folds

(s) Step steel 2 Tier

(t) Stool steel 305mm x 305mm x 510mm

(u) Chair Verandah

Material and labour for recanning of chair and other articles of furniture with plastic cane of size 2 mm wide, in cream colour half round in Godrej pattern complete all as specified and shown on drawing. MAKE OF CANE : PREMIER/ SHAH/ARIHANT /BR SUPER DELUXE

Material and labour for Recanning of chair and other articles of furniture with plastic cane of size 4 mm wide, in white colour half round in Chatta Mat pattern complete all as specified and shown on drawing MAKE OF CANE : PREMIER/SHAH / ARIHANT /BR SUPER DELUXE

Modern Enterprises

RG Builders

B S FURNITURE

M/s R.K.Jain

Daya Nand Jindal

Janeshwar Dass Narender Kumar Jain

singh traders