Janpad Lalitpur ke Nagar Lalitpur me Bhairo Baba Mandir Parisar me Pevar Bricks ka nirman karya (under scheme VN 2026-27) Hon ble Shri Ramratan Kushwaha Ji MLA Lalitpur

xcavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete

Providing and Laying WBM G-3 at site including loading unloading cartage etc as per Direction of Er. Incharge

Concrete with 4cm(1½") gauge stone ballast, coarse sand of 1.25 Fineness modulous and cement in propotion of 8:4:1 in foundations and under floors, including supply of all materials, labour and T&P etc. Required for proper completion

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. Providing and laying factory made chamfered edge Cement Concrete paver blocks 80 mm thick in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper mbedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all asper direction of Engineer-in-Charge.

12 mm cement plaster finished with a floating coat of neat cement of mix :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing Sign Board and photography of work detail