Diversion /Re-organisation of (A) Feeder no 1, 2 and 3 (3.3 kV O/H line ) near kali mandir, SDOCM to feed power supply to excavators and pumps (B) 3.3 kV OH line feeder no. 1 near Drill parking point upto Karipani patch under SDOCM, Dhori Area

Amount

Part A: 3.3KV OH line Feeder no 1, 2 and 3 near kali mandir (Do not fill rate for this item or fill '0')

Erection of steel tubular pole of length exceeding 10 mtrs but not exceeding 12 mtr in cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc as required ( pole supply by department )

Erection of all aluminium conductor of 7/1.96 mm to 7/3.10 mm diameter including binding etc. as required

Supplying and erection of galvanised stay set for 11 KV overhead lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turnbuckle (20mmX600mm), 7/3.15 mm diaG.I.stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.

Supplying and erection of 11 KV pin insulator complete with large steelheadG.I.pin, nuts, washers etc. as required

Supply of 8 SWG GI wire for cradling

Erection of cradle wire

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/ 33 KV as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required

Erection of double pole 3 wire cross arm for 11KV over head lines as required.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Transporting of pole from dismantle place to proposed place

Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required

Part B: 3.3 kV OH line feeder no. 1 near Drill parking point upto Karipani patch (Do not fill rate for this item or fill '0')

Erection of steel tubular pole of length exceeding 10 mtrs but not exceeding 12 mtr in cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc as required ( pole supply by department )

Erection of all aluminium conductor of 7/1.96 mm to 7/3.10 mm diameter including binding etc. as required

Supplying and erection of galvanised stay set for 11 KV overhead lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turnbuckle (20mmX600mm), 7/3.15 mm diaG.I.stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.

Supplying and erection of 11 KV pin insulator complete with large steel headG.I.pin, nuts, washers etc. as required

Supply and erection of 8 SWG GI wire for earth continuity

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/ 33 KV as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required

Erection of double pole 3 wire cross arm for 11KV over head lines as required.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Transporting of pole from dismantle place to proposed place

Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required

Fitting and fixing of Gang Operating switch

Cable laying for shovel operation

Total impact of GST for the purpose of CTC

MAHTO ENTERPRISES

M/S SHIV PARBATI ENTERPRISES