Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹22.9 LAccepted-AOC | L-1 | Accepted-AOC Being lowest and reasonable. | |
| 2 | L-2₹22.9 L+₹1,263 (0.06%)Rejected-Finance | L-2 | Rejected-Finance Not being lowest bidder. | |
| 3 | L-3₹24.8 L+₹1.9 L (8.18%)Rejected-Finance KOTHI NO 766 PHASE III MODEL TOWN BATHINDA PB | L-3 | Rejected-Finance Not being lowest bidder. | |
| 4 | L-4₹25.1 L+₹2.2 L (9.53%)Rejected-Finance 1000 PUDA MODEL TOWN PHASE 5 BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L-4 | Rejected-Finance Not being lowest bidder. | |
| 5 | L-5₹29.0 L+₹6.1 L (26.6%)Rejected-Finance 129 STREET NO 3 3 GREEN AVENUE BIBI WALA ROAD BATHINDA 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | L-5 | Rejected-Finance Not being lowest bidder. |
Tender Value
₹57.0 L
EMD Value
₹1.1 L
Closing Date
6 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bathinda
HQ CWE Bathinda Bathinda Mil Stn
WELCOME MAINT AND CERTAIN ESSENTIAL REPAIRS IN OFFRS MD ACCN IN KHETARPAL ENCLAVE AND TARAPORE ENCLAVE UNDER AGE B/R-I AND AGE E/M-IV UNDER GE(S) BATHINDA AT BATHINDA MIL STN
2024_MES_637474_2
CWE BTD/TOKEN-70/2023-24
Open Tender
Civil Works
Item Rate
270 days
Bathinda Mil Stn
As per NIT
7 documents required · 7 mandatory
₹1,000
GE (South) Bathinda
₹1.1 L
HQ CWE Bathinda
8 Jun 2024
7 Mar 2024
8 Apr 2024
7 Mar 2024
6 Apr 2024
30 Mar 2024
18 Mar 2024
Amount
Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and as directed by Engineer-in-charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4 Sqm each complete all as specified and as directed by Engineer-in- charge.
Taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each complete all as specified and as directed by Engineer-in- charge.
Taking down shutters of any description not exceeding 1.00 sqm each and refixing in the same opening including easing and adjusting including renewal of unserviceable screws etc. complete all as specified and as directed by Engineer-in- charge.
Re-securing or easing & adjusting, without taking down shutter of any description exc 1 sqm but n. exc 2.0 sqm each complete all as specified and as directed by Engineer-in- charge.
Re-securing or easing & adjusting, without taking down shutter of any description not exc 1.00 sqm each complete all as specified and as directed by Engineer-in- charge.
Material and Labour Pressed steel frames with thickness of steel sheet 1.25mm for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125mm x 60mm including one shop coat of priming complete all as specified and as directed by Engineer-in-charge. Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account. supply only.
Material and Labour for PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate as in back filling of pressed steel chowkhats single or double rebated or for fixing hold fasts etc complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (Bonsum/ Hollock) edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. Note:- Wire gauze/ glass to be measured and paid separately.
Supply & fixing factory made plain framed panelled shutters (two panels as approved), 35mm thick of 2nd class hard wood with lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhat complete all as specified and as directed by Engineer-in- charge. Note : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ.
Supply & fixing 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in- charge.
Material and Labour in replacements 18/19mm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing in replacements telescopic hinge length up to 250mm for drawers etc, taking out drawers & refixing the same after replacement of hinges etc complete all as specified and as directed by Engineer-in- charge.
Supply and fixing in replacement 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished and fixed complete all as specified and as directed by Engineer-in- charge.
Supply & fixing catcher such as in cupboards etc. to catch & support shutters of best quality complete all as specified and as directed by Engineer-in- charge.
Supply & fixing for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19mm x 19mm for stiles and 15mm x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings and complete all as specified and as directed by Engineer-in- charge.
Supply & fixing Mild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple or fixed with beads supplied with joinery, complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in replacements Mild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified and as directed by Engineer-in- charge.
Material and Labour in replacements 2nd Hard Wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, cross sectional area exc 6 sqcm and n. exc 13 sqcm, complete all as specified and as directed by Engineer-in- charge.
Supply & fixing mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and as directed by Engineer-in- charge.
Supply & fixing aluminium, anodised, barrel tower bolts of extruded section and fixed, 150mm length,complete all as specified and as directed by Engineer-in- charge.
Supply & fixing 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in- charge.
Supply & fixing Aluminum anodised handle cast type 125 mm long complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in replacement floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in replacements 300mm mild steel ordinary rat tail rod springs (helical spring) , including roller & roller plate, fixed with screws/welding to steel frames/chowkats, complete all as specified and as directed by Engineer-in- charge.
Supply & fixing hasp & staple 100mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engineer-in- charge.
Supply & fixing continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap (when open) 30mm complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in replacements 25mm dia fancy type PVC coated on MS pipe coloured curtain rod with brackets and knobs at both ends as per site requirement complete all as specified and as directed by Engineer-in- charge.
Material & Labour for 25mm dia stainless steel pipe curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and as directed by Engineer-in- charge.
Supply & fixing F in replacements end knob for PVC coated MS pipe curtain rods, complete all as specified and as directed by Engineer-in- charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/springs clips and fixing new ones complete all as specified and as directed by Engineer-in- charge.
Supply & fixing for 4 mm thick, sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in- charge.
Supply & fixing for 4 mm thick, figured glass, pin head type and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in replacement channels of aluminium incuding roller of best quality for built in cup board by taking down exisiting glass and refixing the same glass after replacement of aluminimum channels and roller complete all as specified and as directed by Engineer-in- charge.
Material and Labour for Welding in repair n. exc 6mm thick metal and n. exc 2.50 cm in length complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in replacement cover for PVC overhead water tanks of any capacity (as per sample) complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in replacements Rotational moulded polyethylene water storage tank tripple layer of 1000 Litres capacity, white in colour, (cylindricalvertical tanks with closed top) hoisted and fixed in position including inlet, outlet fitting and 25 mm bore PTMT float valve complete all as specified in SSR Part - I complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in replacements Rotational moulded polyethylene water storage tank tripple layer of 500 Litres capacity, white in colour, (cylindricalvertical tanks with closed top) hoisted and fixed in position including inlet, outlet fitting and 25 mm bore PTMT float valve complete all as specified in SSR Part - I and complete all as specified and as directed by Engineer-in- charge.
Cleaning of water tank exc 250 & n. exc 500 ltr capacity including removing all scale & dirt, etc., from tank and from mouths of circulating pipes etc. complete all as specified and as directed by Engineer-in- charge.
Cleaning of water tanks exc 500 & n. exc 1000 ltr capacity including removing all scale & dirt, etc., from tanks and from mouths of circulating pipes etc. complete all as specified and as directed by Engineer-in- charge.
Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position complete all as specified and as directed by Engineer-in-Charge
Roughening surfaces of old concrete floor by picking , sweeping clean & washing down with watetr to remove dust etc.complete all as specified and as directed by Engineer-in-Charge
Demolition of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge
Material & Labour for 50mm thick cement concrete 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth (without using extra cement) complete all as specified and as directed by Engineer-in-Charge
Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
Material and labour for Glazed ceramic coloured tiles of size 350mmx 250mm / 450mm X 350mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for vitrified ceramic tiles , area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm , 10 mm thick (square), polished, shade and colour as approved by GE , in floors etc set and jointed in neat cement slurry @ 3kg/ Sqm and pointed in white cement with pigments to match the shade of tiles laid over and including 15 mm thick Screed bed or bedding layer in CM (1:6) in white cement with pigments complete all as specified and as directed by Engineer-in- charge. Note: Only coarse sand shall be used in screed bed.
Material and Labour for vitrified ceramic tiles , area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm , 10 mm thick (square), polished, shade and colour as approved by GE , on vertical surfaces as in skirting etc set and jointed in neat cement slurry @ 3kg/ Sqm and pointed to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:4) in white cement with pigments to receive the tiles complete all as specified and as directed by Engineer-in- charge.
Dismantling carefully cement concrete in floor, etc around floor traps or any other concealed fittings and including material and labour sealing joints with solvent cements or other suitable materials and making joint leak proof and making good surfaces with PCC 1:2:4 or CM 1:3 (repair/replacement of tiles floor shall be measured and paid separately),complete all as specified and as directed by Engineer-in- charge.
Material & Labour for marble work not less than 16 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified complete all as specified and as directed by Engineer-in- charge.
Taking down cement plaster of any description/terrazzo finish, etc.; from brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed by Engineer-in- charge.
Demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and as directed by Engineer-in- charge.
Material and Labour Brick work with sub class ‘B’ burnt clay bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in- charge.
Material and labour Brick work with sub class 'B' old size burnt clay bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge.
Material and labour for 15mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surfaces of walls and finishing even & smooth but without using extra cement complete all as specified and as directed by Engineer-in-charge.
Material and labour for 15mm thick cement plastering in CM 1:4 on fair faces of brick work or concrete surfaces on wall and finished even & smooth (without using extra cement) complete all as specified and as directed by Engineer-in-charge.
Material and labour for rendering 5mm thick in CM 1:3 on concrete surfaces on ceiling and finished finished even & smooth (without using extra cement) complete all as specified and as directed by Engineer-in-charge.
Material and labour PCC 1:5:10 type E-2 using 40mm graded crushed/stone aggregates for foundations, filling & mass concrete, sub-base & sub-floors, etc. complete all as specified and as directed by Engineer-in-charge. .
Taking down or up 15 mm bore galvanised iron tubing /Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite pressure pipe including fittings and removal from site complete all as specified and as directed by Engineer-in-charge.
Taking down or up 20mm bore galvanised iron tubing / Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite pressure pipe including fittings and removal from site complete all as specified and as directed by Engineer-in-charge.
Supply & fixing GI tubing medium grade with all new fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed by Engineer-in-charge.
Supply & fixing GI tubing medium grade with all new fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed by Engineer-in-charge.
Refixing old GI tubing 15 mm bore pipe reterived from serial item no.59 here-in-before after cleaning and connections in new or old position , with new fittings and fixed to walls & ceilings or laid in floors complete all as specified and directed by Engineer-in-charge Note:- The rate of cleaning of surfaces of old pipe is included in this item.2 The rate of new fiitings is also included in this item. Hence old fittings shall not be used in this item.
Refixing old GI tubing 20 mm bore pipe reterived from serial item no.60 here-in-before after cleaning and connections in new or old position , with new fittings and fixed to walls & ceilings or laid in floors complete all as specified and directed by Engineer-in-charge Note:- The rate of cleaning of surfaces of old pipe is included in this item.2 The rate of new fiitings is also included in this item. Hence old fittings shall not be used in this item.
Refixing old Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite pressure pipes 15mm dia reterived from serial item no.59 here-in-before after cleaning and connections in new or old position , with new fittings and fixed to walls & ceilings or laid in floors complete all as specified and directed by Engineer-in-charge Note:- The rate of cleaning of surfaces of old pipe is included in this item.2 The rate of new fiitings is also included in this item. Hence old fittings shall not be used in this item.
Refixing old Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite pressure pipes 20mm dia reterived from serial item no.60 here-in-before after cleaning and connections in new or old position , with new fittings and fixed to walls & ceilings or laid in floors complete all as specified and directed by Engineer-in-charge Note:- The rate of cleaning of surfaces of old pipe is included in this item.2 The rate of new fiitings is also included in this item. Hence old fittings shall not be used in this item.
Supply & fixing in replacements long body bib tap 15mm bore, Chromium Plated, cast copper ally, fancy type, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in replacements 15mm bore Pillar tap, cast copper alloy, chromium plated, fancy type with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in replacements 15mm bore, brass Chromium plated basin mixer system with popup waste with 450mm long braided hosed screwed down, screwed for screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in replacements 15mm bore, brass sink mixer with swinging spout on upper side (wall mounted model) with connecting legs and wall flanged screwed down, screwed for screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in replacements 15mm bore, brass Chromium plated mixer 3-in-1 wall mixer system with provn for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs and wall flange including 105mm round shape multi flow with air effect ABS body face plate chromium plated hand shower rubit cleaning system with 1.5 mtr long flexible chromium plated hose pipe, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in replacements 15mm bore Chromium plated stop valves, cast copper alloy, fancy type with long shank and cup (concealed type) complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in replacements 15mm bore Chromium plated angle cock screwed both ends for iron pipe complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in replacements 32/40mm size waste fittings, brass, Chromium plated , for glazed ware sinks, basins etc. with long flange end embedded in red lead cement and other end fixed complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in replacement Vitreous china wash hand basin, white, flat back, of size 550mm x 400 mm including cast iron cartilever bracket ,32 mm dia brass waste coupling and including fixing of waste fitting and union complete all as specified and as directed by Engineer-in-charge.
removing old basin carefully from existing brackets and refixing the same with proper fixing after repairing complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in replacements vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' trap including connection to drain ( or outgoing pipe) and to flushing pipe, anti syphonage pipe etc., including plastic water closet seat cover black pedestal pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed by Engineer-in-Charge.
Fixing only in replacements vitreous china wash down water closet pan (pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, ant-syphonage pipe, etc. complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacements vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and as directed by Engineer-in- charge.
Supply & Fixing in replacements PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in replacements plastic water closet seat , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in replacement PVC valveless, syphonic action type flushing cistern,10 ltr capacity, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connectin to flush pipe of any size and pattern complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in replacements sinks with drainage board with overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in replacements brass chromium plated shower rose 100mm dia with swivel joints with and including suitable shower arm any size, complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in replacements PVC connections 15mm size with brass nuts of length 450mm complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in replacements Jet spray, Chromium Plated, brass body with wall hook and 1 mtr Stainless Steel pipe complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in replacements health faucet brass body with wall hook and 1 mtr Stainless Steel pipe complete all as specified and as directed by Engineer-in- charge.
Supply and fixing tubular towel rail brass chromium plated 20 mm dia ‘D’ type 60 cm long including end brackets complete all as specified and as directed by Engineer-in-charge.
Supply & fixing chromium plated towel ring complete all as specified and as directed by Engineer-in-charge.
Supply & fixing Corner glass shelf (25cm/30cm ) with chromium plated brass bracket & railing etc . complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing in replacements sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard & railing 60 cm long, complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in replacements soap dish stainless steel ,complete all as specified and as directed by Engineer-in-charge.
Supply & fixing PTMT mirror cabinet of size 380mm x 450mm best quality confirming to sample kept in GE's office, complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in replacements brass chromium plated bottle trap for wash basins with inlet and out let screwed for pipe or connections including necessary packing, union and cap complete all as specified and as directed by Engineer-in-charge.
Supply & fixing stainless steel plate racks of size 900mm x 600mm x 250mm having thickness of Stainless Steel strip 1mm, fixed on wall etc complete all as specified & directed by Engr-in-Charge.
Supply & fixing in replacements CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified & directed by Engr-in-Charge.
Supply & fixing in replacements Toilet paper holder recessed type stainless steel complete all as specified & directed by Engr-in-Charge.
Material & Labour for grinding and polishing of old treated terrazzo topping/ marble/kota stone flooring including treating the surfaces with wax polishing etc and clean the surface complete all as specified & directed by Engr-in-Charge.
Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches including all fittings & accessories complete all as specified and as directed by Engineer-in-charge.
Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches including all fittings & accessories complete all as specified and as directed by Engineer-in-charge.
Supply & fixing cast iron sand soil waste and vent pipe 75mm bore(sand cast) with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and as directed by Engineer-in-charge.
Supply & fixing cast iron sand soil waste and vent pipe 100mm bore(Sand cast) with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in replacements CI bends any radius, 100mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified and as directed by Engineer-in-charge.
Supply & fixing in replacements CI bends any radius, 75mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified and as directed by Engineer-in-charge.
Demolition of RCC as in roof slabs (other than ground floors), beams, stair case, landing, chajjas, and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and as directed by Engineer-in- charge. Scrap iron for schdule of credit of this item shall be ascertained by BOO and the same shall be enclosed with final bill duly countersinged by GE.
Material and Labour for RCC M-20, 1:1½: 3 (using 20mm graded stone aggregates) as in slabs supported on walls, lintel beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like. (Reinforcement will be measured and paid for separately) complete all as specified and as directed by Engineer-in- charge
Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)
Material and Labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) on flat rough finished surfaces not exceeding 200mm thick complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour providing cement concrete (RCC/PCC) 1:2:4, type B0 (using 12.5mm graded crushed stone agrregate) as in broken or cracked Chhajjas, RCC columns, beams, stairs/steps etc in one or two layers as required (thickness from 25mm to 40mm) and finshing the surface with 15mm thick cement plaster in CM 1:4 including taking out loose/cracked concrete portion and plaster etc and applying neat cement slurry before providing concrete, complete all as speicified. (Note : 1. Rates deemed to include for any scaffolding/ ladders or any other mean to work in two story buildings including welding of reinforcement. to be provided for repairs of chhajjas, beams, columns, stair case, fins, facia etc.complete all as specified and as directed by the Engineer-in-Charge. 2. The re-inforcement shall be measured & paid in subsequent item separately )
Material & Labour for 1.50 mm thick wall putty on wall surfaces including making up depressions etc. complete all as specified and as directed by the Engineer-in-Charge. Note: Measurement and payment shall be made only of the effected surface.
Material & Labour for 1.50 mm thick wall putty on ceiling surfaces including making up depressions etc. complete all as specified and as directed by the Engineer-in-Charge. Note: Measurement and payment shall be made only of the effected surface.
Material & Labour for applying one coat of oil bound distemper of approved tint or shade on wall surfaces including preparation of these surfaces duly filled the nail holes and depressions with wall putty of same tint to match with colour of distemper, smoothering the surface and finally cleaned floors complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for applying one coat of oil bound distemper of approved tint or shade on ceiling surfaces including preparation of these surfaces duly filled the nail holes and depressions with wall putty of same tint to match with colour of distemper, smoothering the surface and finally cleaned floors complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for applying two coats of oil bound distemper of approved tint or shade on wall surfaces including preparation of these surfaces duly filled the nail holes and depressions with wall putty of same tint to match with colour of distemper, smoothering the surface and finally cleaned floors complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for applying two coats of oil bound distemper of approved tint or shade on ceiling surfaces including preparation of these surfaces duly filled the nail holes and depressions with wall putty of same tint to match with colour of distemper, smoothering the surface and finally cleaned floors complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for preparation of surfaces and applying two coats of oil bound destemper over a coat of alkali resistant priming paint on plastered surfaces of wall surfaces including complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for applying one coat of white wash on old decorated plastered or unplasted surfaces on walls, including preparation of these surfaces duly filled the nail holes and depressions with wall putty of same tint to match with white wash, smoothering the surface and finally cleaned floors complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for applying two coats of white wash on old decorated plastered or unplasted surfaces of walls, etc including preparation of these surfaces duly filled the nail holes and depressions with wall putty of same tint to match with white wash, smoothering the surface and finally cleaned floors complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for applying one coat of white wash on old decorated plastered or unplasted surfaces on ceiling, including preparation of these surfaces duly filled the nail holes and depressions with wall putty of same tint to match with white wash, smoothering the surface and finally cleaned floors complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for applying two coats of white wash on old decorated plastered or unplasted surfaces of ceiling, etc including preparation of these surfaces complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for preparation of old decorated, plastered/unplastered or concrete surfaces on walls including cornices, chajjas & pillars etc.; by brooming down, steel wire brushing; scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, etc. and applying one coat of exterior emulsion paint over wall and ceiling surfaces including cornices & pillasters etc as per manufacturer's specification & instruction; complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for preparation of old decorated, plastered/unplastered or concrete surfaces on walls including cornices & pillars etc.; by brooming down, steel wire brushing; scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, etc. and applying one coat of cement base paint on these surfaces etc.; complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for preparation of old decorated, plastered/unplastered or concrete surfaces on walls including cornices & pillars etc.; by brooming down, steel wire brushing; scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, etc. and applying two coats of cement base paint on these surfaces etc.; complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for Preparation of old painted wooden and wood based surafaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint, quality, colour including cleaning of floor/wall surfaces complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for Preparation of old painted wooden and wood based surafaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint of approved tint, quality, colour including cleaning of floor/wall surfaces complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for preparation of new or previously untreated wood and wood based surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour Preparation of old painted steel & iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint, quality, colour on these surfaces, including cleaning of floor/wall/glass pane surfaces complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour Preparation of old painted steel & iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint, quality, colour on these surfaces, including cleaning of floor/wall/glass pane surfaces complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for applying two coats of exterior paint over a coat of primer on newly plastered wall surfaces including preparation of these surfaces and matching the colour/tint with existing surfaces complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour applying one coat of plastic emulsion paint of any tint & shade on old prepared on wall surfaces complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour applying one coat of plastic emulsion paint of any tint & shade on old prepared on ceiling surfaces complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for Antitermite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron/plinth etc., complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for Treatment of soil under exsiting floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors. complete all as specified and as directed by the Engineer-in-Charge.
Material & Labour for anitermite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 ( 1 cement : 2 coarse sand) to match the exisitng floors. complete all as specified and as directed by the Engineer-in-Charge.
Taking down carefully existing copper/Aluminum point wiring complete all as specified and as directed by the Engineer-in-Charge.The weight of aluminum / copper scrap shall be ascertained by BOO as ordered by GE and the same shall be enclosed with final bill duly countered by GE.
Dismantaling & Taking down of existing unservicable switch 5 Amp /two way switch 5 Amp/ / bell push 5/6 Amps/socket 5A/switch 15 Amp / socket outlet 15 Amp /switch socket combination 5/15 Amp / fan regulator / ceiling rose covered under serial item no. 150.00 to 164.00 of BoQ here in after complete all as specified and as directed by the Engineer-in-Charge. complete all as specified and as directed by the Engineer-in-Charge. complete all as specified and as directed by the Engineer-in-Charge.
Dismantaling & Taking down of existing unservicable call bell covered under serial item no. 165.00 of BoQ here in after complete all as specified and as directed by the Engineer-in-Charge. complete all as specified and as directed by the Engineer-in-Charge.
Dismantaling & Taking down of existing unservicable light fittings/fixtures covered under serial item no. 166.00 to 174.00 of BoQ here in after complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with 1.5 Sqmm nominal cross sectional area single core PVC insulated, unsheathed 'multi stranded' FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through existing concealed conduit surface on wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including modular metal flush box concealied with front & modular cover plate with frame suitable matching colour of required module for mounting or housing switches, socket outlets, fan regulators, etc. including blanking plates & all other fixing accessories and including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge for the following items described under serial item nos. 142.00 & 143.00 of BoQ NOTE:- The quoted unit rate is deemed to be inclusive of cost of metal flush boxes, modular white cover plates, modular frame plates and flush fixed with cement mortar 1:4 etc.However modular switches,sockets and regulators shall be measured and paid seperately under respective items of Schedule'A' BoQ.
One Bell/Buzzer point controlled by one push button .
One light point controlled by two way switch.
Material and Labour for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with 2.5 Sqmm nominal cross sectional area single core PVC insulated, unsheathed 'multi stranded' FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through existing concealed conduit surface on wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including modular metal flush box concealied with front & modular cover plate with frame suitable matching colour of required module for mounting or housing switches, socket outlets, fan regulators, etc. including blanking plates & all other fixing accessories and including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge for the following items described under serial item nos. 145.00,146.00,147.00 & 148.00 of BoQ. NOTE:- The quoted unit rate is deemed to be inclusive of cost of metal flush boxes, modular white cover plates, modular frame plates and flush fixed with cement mortar 1:4 etc.However modular switches,sockets and regulators shall be measured and paid seperately under respective items of Schedule'A' BoQ.
One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc.
One Socket outlet three pin, 6 Amp, on the same board
One Socket outlet three pin, 6 Amp, independent board
One socket outlet three pin, 5/15 Amp, independent board
Supply & Fixing modular type Switch single pole, one way, 6 Amp, one module, complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing modular type Switch single pole one way, 16 Amp, one module, complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing modular type Switch single pole, two way, 6 Amp, one module, complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing modular type Bell push switch single pole one way, 6 Amp, one module, complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing modular type Socket outlet , multipurpose, 3 pin, single pole one way, 6 Amp, two module, shutter type complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing modular type Socket outlet multipurpose 3 pin, 2 in 1 single pole one way 6/16 Amp, two module, shutter type complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing Fan regulator-120W, modular type, 5 step, high speed, two module complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing Switch piano, flush type single pole, one way 5 Amp complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing Switch piano, flush type single pole, two way 5 Amp complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing Switch piano, flush type single pole, one way 15 Amp complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing Bell push 5/6 Amps 230 V AC complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing Socket outlet 3 pin, 5A, flush type complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing Socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing Stepped type electronic modular type fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing Ceiling rose, 3 terminal PVC/polycarbonate, suitable for 230 V, AC, 50 Hz supply complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing call bell ding dong type AC 230 V complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing Wall mounted extruded Aluminium & polycarbonate integrated LED batten fitting and fixture with and including 1.2 m long 20watt tube rod , 3000/6500K,efficacy not less than 90 lumen/watt, extruded , PC diffusor and integrated inbuilt driver complete as per manufacturer's instructions including making connection complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing Decorative wall light fixture made of polycarbonate suitable for retrofit 9W LED lamp (base B-22) complete with PC diffusor & including one 9W LED lamp(base B-22), 3000/6500K, not less than 90 lumen/watt efficacy complete as per manufacturer's instructions including making connection complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing integrated round shape 6 watt 220V AC surface type 3000/6500K,efficacy not less than 90 lumen/watt with high efficiency PUMMA diffusor soft glare free light complete and integrated inbuilt driver, holders, LED lamps etc complete as per manufacturer's instructionsincluding making connection complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing integrated round shape 18 watt 220V AC surface type 3000/6500K,efficacy not less than 90 lumen/watt with high efficiency PMMA diffusor soft glare free light complete and integrated inbuilt driver, holders, LED lamps etc complete as per manufacturer's instructions including making connection complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing LED light fitting 9/10W bulkhead luminaires incluing LED light, driver, holder complete as per manufacturer's instructions connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing Post Top Lantern LED type 20 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistance complete with driver with and including 20Watt lamp complete as per manufacturer's instructions complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing LED land scape bollard light fitting, round shaped of 0.6m pole , 10watts, efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, IP65, PC diffusor, module and inbuilt driver with and including 10Watt LED Lamp complete as per manufacturer's instructions including making connection & fixing of pole base with nut and bolt to PCC pedestal/coping complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing LED AC Rope 60 LED/M 6500K/4000K IP65, waterproof, with reflector, multicolor complete C ROPE 60 LED/M Light Accessories complete complete as per manufacturer's instructions and complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing Decorative, surface mounting, dome shaped pendant in green & black finishes including 01x LED retrofit tube 7 watt, 6500K, efficacy not less than 90 lumen/watt, complete including making connection complete all as specified and as directed by Engineer-in-charge.
Material and labour in replacement Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with and including single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH for earth wire in existing PVC concealed conduit (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and directed by Engineer-in-charge. Notes:- (a) Three single core 4 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade shall be measured as one length.
Material and labour in replacement Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with and including single core 6 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH for earth wire in existing PVC concealed conduit (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and directed by Engineer-in-charge. Notes:- (a) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade shall be measured as one length.
Material and labour in replacement Sub main wiring complete with two single core 10 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with and including single core 10 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH for earth wire in existing PVC concealed conduit (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and directed by Engineer-in-charge. Notes:- (a) Three single core 10 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade shall be measured as one length.
Supply and Fixing in replacement Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,, double door, powder coated TPN 4 way 240 Volt, 200 Amps rated bus bar, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ.
Supply and Fixing replacement Sheet metal enclousers made out of CRCA mild steel sheet not less than 1.2mm thick,, double door, powder coated DB SPN 12 way 240 Volt, 200 Amps rated bus bar, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed by Engineer-in- charge.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ.
Supply & Fixing in replacement sheet metal encloser single door 2 way SPN 240V ISI marked complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made including blanking plate complete all as specified and directed.Note: MCB/ Isolators shall be measured and paid seperately under appropriate item of BOQ.
Material and Labour in replacement sheet metal enclosure with socket and plug top and MCB single pole enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amp 230 Volt complete all as specified and as directed by Engineer-in- charge.
Supply and fixing in replacement MCB ‘B’ curve suitable for 230 volts AC supply, 06 to 32 Amps, SP with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge
Supply and fixing in replacement MCB ‘C’ curve suitable for 230 volts AC supply, 40 to 63 Amps, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge
Supply and fixing in replacement MCB 415V 40 to 100Amp TPN ‘C’ series rupturing capacity not less than 10 KA, fixing in DB complete all as specified and as directed by Engineer-in-charge
Supply & Fixing in replacement RCBO for EARTH LEAKAGE, OVERLOAD & SHORT- CIRCUIT PROTECTION 415 V 40-63A AC type 10kA Four pole 30mA ISI marked complete all as specified and as directed by Engineer-in-charge
Supply and Fixing in replacement of MCCB 4 pole of rating 63 Amp, Icu -100% 16 KA, thermal magnetic based complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing in replacement of MCCB 4 pole of rating 100 Amp, Icu -100% 16 KA, thermal magnetic based complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing in replacement of MCCB 4 pole of rating 125 Amp, Icu -100% 16 KA, thermal magnetic based complete all as specified and as directed by Engineer-in- charge.
Material & Labour in replacement for earthing with galvanized steel plate electrode 600MM x 600 mm x 6 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20 mm dia GI pipe medium grade connected with funnel having wire mesH for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using 20MM graded stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion . Note:- It is mandatory to paint a sqaure shape notice board of yellow color with legible black color letters of earthing mentioned details as below; Cost incurred deemed to be inlcuded in quoted rate:- (i) CA No. (ii) Date of installation after initial testing & Value of earth resistance in Ohm (iii) Date of last testing (iv) Value of earth resistance in Ohm in last test
Supply & Fixing in replacement modular metal flush box 1 module complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement modular metal flush box 2 module complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement modular metal flush box 3 module complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement modular metal flush box 4 module complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement modular metal flush box 6 module complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement modular metal flush box 8 module complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement modular metal flush box 12 module complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement white cover plate wih frame 1 module including blanking plate complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement white cover plate wih frame 2 module including blanking plate complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement white cover plate wih frame 3 module including blanking plate complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement white cover plate wih frame 4 module including blanking plate complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement white cover plate wih frame 6 module including blanking plate complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement white cover plate wih frame 8 module including blanking platecomplete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement white cover plate wih frame12 module including blanking plate complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement surface mounting box 1 module (for 01x switch) complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement surface mounting box 3 module (for 03x switch) complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement surface mounting box 5 module (for 05x switch) complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement surface mounting box 3 module( 1xsocket, 1xswitch) complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement surface mounting box 6 module( 2xsocket, 2xswitch) complete all as specified and directed by Engineer-in-charge.
Supply & Fixing in replacement cable connector clamp made of PC (shell) & inner conductor made of nickel plated copper material suitable for 1.5sqmm to 6.00sqmm complete with control lever complete all as specified and directed by Engineer-in-charge.
Material & Labour in replacement for earthing circuit wiring (green color) with multi-stranded copper conductor, single core, FRLS, PVC insulated and unsheathed cable of size 2.5 sqmm, run through existing conduit connected to existing terminal/socket point outlet/ MCBs etc complete all specified and directed by Engineer-in-charge. Note:- One run of cable in existing concealed conduit/surface drawn with suitable saddling shall be measured as one Running metre(RM) and shall deemed to be included in the quoted rate.
Supply & Fixing in replacement non metallic PVC casing capping medium grade 10mm x 20 mm nominal size, 'ISI marked' inclusive of all fittings and all fixing accessories complete all as specified and as directed by Engineer-in- charge.
Supply & Fixing in replacement non metallic corrugated flexible PVC conduit medium grade 20 mm nominal size, 'ISI marked' inclusive of all fittings and all fixing accessories complete all as specified and as directed by Engineer-in- charge.
Supply & Fixing Bed Switch piano, single pole, one way 6 Amp complete all as specified and as directed by Engineer-in- charge.
Supply & Fixing Hanging bell push switch, single pole, one way 6 Amp complete all as specified and as directed by Engineer-in- charge.
Supply & Fixing LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 protection including fixing with suitable bolt and nuts complete with making connection complete all as specified and directed by Engineer -in-charge.
NOTE for serial item no.1.00 to 215.00 of BoQ :- ARMAAN COMPLAINTS / DAY TO DAY / DOOR TO DOOR COMPLAINTS:- Complaints regarding repair / replacement to these items to be attended unconditionally. All in cost of these items incurred upon deemed to be included in respective items of BoQ and nothing shall be paid extra on this account.
Note:- Net contract sum shall be calculated after deduction of Sch of credit.
K L JINDAL AND CO.
M/S KARTIK BUILDERS
M/s Kamal Builders
KULWANT RAI
SHARDA ENTERPRIES
Aman Enterprises
AABIA CONSTRUCTION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .