SPECIAL REPAIR OF BUILDING NO P-63 OTM ACCOMMODATION

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Dismantling of brick work of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles

Demolition of cement concrete of any description complete all as specified.

Dismantling water tanks capacity exc 500ltr and n exc 1000 Ltrs capacity and removing to store.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:6)

M&L for Brickwork with subclass `B' bricks, straight or curved on plan to any radius in half thick brick built in CM(1:4)

Factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part - I section 8.20 (a), all as specified and directed by Engr-in-Charge

Factory made, 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, all as specified and directed by Engr-in-Charge.

Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of mild steel tubes for top and bottom rails . Mild steel frame shall be covered with heat molded plain cover PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and gap insert for top rail and bottom rail ; Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the frame at site as per specification clause No 8B.1 to 8B.10 and drawing on page No 146 of MES SSR-2010 Part-II.

Factory made solid PVC flush shutters door/cupboard shutte 28-30mm thick with 2mm thick moulded prelam PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face complete all as specified and directed

Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing on Page No 150 MES SSR-2004 Part-II and as directed by the Engr- in-Charge.

S&F Pressed steel frames of size 105x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified as directed

S&F Pressed steel frames of size 125x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate ,etc complete all as specified as directed.

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified .

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 300 mm long.

S&F continuous (piano) hinges mild steel, bright finish or electro glvanised 30mm width of flaps(when open).

S&F MS 150mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified

S&F aluminium handles cast type, anodised, 150 mm size complete, all as specified .

S&F 150mm long Hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire of average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staple.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; door frame, and similar work conforming to Fe 290 Gde-E-165 all as specified .

S&F MS in bands straps supprt or stays for rainwater, ventilating pipes, incl bolts, if required, hooks (stai), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde-E-165

S&F Steel windows made up of box steel section of 16 gauge ms sheet ub outer frame, shutter farame and centre frame with outer side glazed shutter and inner side wire gauged shutter fixed as shwon in drg consisting with two nos pintol hinges 75mm long, two Nos stove enemaled tower bolts 150 mm long and one No steel handle, deovitailed or welded each panels complete with necessary cleats and stopers all as specified as directed.

Steel ventilator made up of box steel section of 16 gauge MS Sheet frame, fixed type suitable to fix half portion wire cloth and half portion glass with suitable MS beading or flat or oil putty complete.

M&L for 75 mm thick in Plain cement concrete type C2 ( 1:3:6)( using 20 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floors finished rough all as specified.

M&L for Glazed ceramic coloured tiles 300x450x 7mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and as specified.

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified

M&L for taking down existing roof treatment of any description and any type all as specified and directed by Engr-in-Charge

M&L for 15 mm thick cement plaster in cement mortar 1:4 on roof surfaces finished even and smooth without using extra cement, incl water proofing compound brushing neat cement slurry with 3.0 kg of cement per Sqm complete all as specified.

Supply only liquid water proofing compound.

M&L for providing and laying 40mm thick PCC (1:2:4) using 20mm graded agg with WPC Compound complete all as specified and directed by Engineer-in-Charge.(WPC will be paid seperately)

Priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm all as specified (Make of polymeric water proofing membrane : M/s IWL India Ltd/M/s STP Texas Ltd/Bengal Bitumen)

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 10 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, all as specified .

M&L for preparing new plastered surfaces Applying two coats of OBD/on new plastered surface over a coat of alkali resistant primer of any description of approved tint over new plastered surface..

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

M&L Two coats of cement base paint on newly plastered wall surfaces over a coat of alkali resistant primer including preparation complete all as specified and as directed.

M&L for 5mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement, all as specified .

Preparing new ceiling surfaces applying three coats of white wash complete all as specified.

Preparing new plastered surfaces of walls and applying two coats of weather coat paint as on facia, fins, chajja boarder, columns, drops, parapets, etc. over a coat of painting primer, complete all as specified

Complete removal all exsting old plastered surfaces of walls and applying two coats of cement base paint all as specified and dircted by Engr In Charge

Complete removal all exsting old plastered surfaces of walls and applying two coats of OBD paint all as specified and dircted by Engr In Charge.

Complete removal incl preperation old decorated wall surfaces applying two coats of white wash on wall complete all as specified.

Complete removal incl preperation old decorated of ceiling surfaces applying three coat of white wash complete all as specified.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, all as specified.

Preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint, all as specified.

Preparation of old steel and iron surfaces not exceeding 10 cms width or girth and applying one coat of synthetic enamel paint, complete, all as specified.

Preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, all as specified.

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3mm thick all as specified

All as per item No 54 above but frosted glass.

Taking up or down steel tubing with connections for cleaning for refixing complete of bore 15mm, all as specified .

Taking up or down steel tubing with connections for cleaning for refixing complete of bore 20mm, all as specified .

Taking up or down steel tubing with connections for cleaning for refixing complete of bore 25mm, all as specified .

S&F 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings all as specified.

Re-fixing only 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings

S&F 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings

Re-fixing only 20mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings

S&F 25 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings

S&F in repair 15 mm dia bore fancy type chromium plated bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed. Make ESS ESS/Jaquar or equivalent .

S&F in repair 15mm dia bore CP Pillar tap, fancy type chromium plated with crutch or butterfly handle screwed down high pressure with or without letterd hot or cold with long screed shanks and fly nuts screwed for iron pipe all as specified.

S&F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified and directed Make ESS ESS cat part No -T-112B/Kohler or Equivalent make.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality suitable for hot and cold supply complete all as specified. Make Prayag Cat part No BCT-04/Polytuf or equivalent make.

S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed Make : ESS ESS cat part No- RF 202 for shower and Cat Part SA-105 for shower Arms/Kohler or Equalent make.

S&F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor. Make Cera Cat Part No Calina S 3010102/Hindware or Equalent make.

S&F in repair under counter wash basin of size 550x450 mm vitrous China including , waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed. Make cera cat part No - Comet 1016 /Kohler or equalent make.

M&L black granite 18-20mm thick of any type work table rubbed ad polished for plate form and counter type for wash hand basin 18-120m m thick machine cut and polished of approved colour ( Black zet with Granite polish) incl setting and jointing in neat cement slurry and pointed in coloured cement to match the services of marble counter granite etc complete.

Makrana white marbel work 18 to 20 mm thick (table rubbed and polished) in steps,jambs, pillars, windowills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade.

S&F soap dish vitreous china white aooroximate size 160x160x90mm complete all as specified.

S&F in repair (Plastic Polymer Cistern) valve less, with top button double action type flushing cistern of capacity 10 ltrs , low level white inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type incl provision of 32mm PVC flush pipe of required length and making connections complete incl taking down old one by dismantling the existing unserviceable cistern of any description Make: Prayag Cat Part No 504/ parryware or equivalent.

S&F in repair Waste coupling, 32mm dia, of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified.

S&F in repair Waste coupling, 40mm dia, of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.

Dismantling of cast iron or PVC pipes including all fittings and accessories, 100/75 mm dia and in any position all as specified.

S&F PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips complete all as specified.

S&F PVC(SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls or laid in trenches with PVC brackets/clips complete all as specified.

S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified

S&F PVC(SWR) bends suitable for 75 mm external dia complete all as specified

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia

S&F PVC (SWR) junction single, (single T) equal or unequal of 75mm dia

S&F PVC (SWR) vent cowl of 75mm bore

PVC (SWR) branch pieces single Y equal or un equal with access door confirming to IS: 14735, suitable for PVC soil waste discharge pipe 110mm size complete

Add to items No 83 for 75mm bore pipes for provided with access door all as specified and directed

Add to items No 82 for 110mm bore pipes for provided with access door all as specified and directed

S&F Rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres all as specified .

S&F Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

S&F in 20mm PVC Nipple suitable for HDPE Water tank (Min Wt 15mm-38gms) complete

S&F in repair PTMT grating round 100 mm size, all as specified.

S&F in Repair PVC waste pipe 800mm long suitable for 32mm dia waste coupling complete all as specified.

S&F in repair MS powder coated decorative mild steel curtain rod of 25 mm dia with brackets both side of globe all as specified and directed by Engr-in-charge.

Dismantling of plain, corrugated or semi corrugated sheeting, of any description, roof coverings all as specified.

S&F painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified as directed.

S&F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified as directed.

S&F in repair Gun metal globe or gate valveswith iron wheel head screwed both ends for iron pipe and fixed for unions of 20 mm bore and fixed in repairs, all as specified and directed

All all per item Srl No 99 above but 15mm

S&F in repair Gun metal globe or gate valveswith iron wheel head screwed both ends for iron pipe and fixed for unions of 25 mm bore and fixed in repairs, all as specified and directed

Cutting chases for concealed water tubing or concealed , etc. and making good, cutting exceeding 20cm girth in CM 1:3 complete all as specified.

S&F in repair Stop/Angle valves fancy type, chromium plated with long shank and cup (concealed type) for iron pipe or for unions of bore dia 15mm and fixed, all as specified.

Plain, Aluminium sheeting, 0.56mm thick Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing fixed to walls and fixed with screws.

S&F in Repair vitreous china urinal half stall type suitable size white including all fittings complete. Make :- Prayag Cat Pat No- 4999

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.00 Kg of cement per sq m all as specified and directed.

M&L for machine cut kota stone slab 20-22 mm thick as in floor of over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 4 for laying floor finishes complete.

M&L, Kota stone slab 20-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 10 mm thick 1:3 cement mortar all as specified

Dismantling wall and ceiling board (fibre, pulp, insulation etc or insulation boards/slabs/blankets any thickness incl cover fillets.

Preparation of new plastered surface of wall and applying three coats of white wash, complete all as specified and directed.

False ceiling with Gypsum based ceiling tiles and frame work (with aluminium foil on one side) of size 595mm x 595mm of thickness not less than 9mm including GI powder coated frame angle/tee grid frame work for ceiling with following specifications:- (a) Bottom tee 25mm x 25mm x 1mm, 1 mm thickness. (b) Cross tee 25mm x 25mm x 1mm, 1 mm thickness. (c) Wall angle 25mm x 25mm x 1mm, 1 mm thickness. (d)1mm GI wire suspenders alongwith adjustable clamps to maintain leveling including fixing to ceiling fasteners as per manufacturers instructions. (e) Rest all as directed by the GE. Make : VINLY TOUCH OF LAGYP or equivalent in make as per particular specifications.

Making benching with PCC (1:2:4) type B0 using WPC along side wall adjoining to roof in concave shape complete all as specified.

M&L for cement concrete type B 2 (1:2:4) 40mm graded agg in foundation filling and mass concrete complete all as specified.

Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following: - (a) After demolition of floor & lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:3) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Filling with PCC 1:7:12 in E-2 bk bats demolished portion of sunken part in cement mortar (1:4) all as specified and directed (e) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sq. m and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sq. m), laid on floor & sides of sunken slab sealing all joints to the entire satisfaction of Engineer-in-Charge. MAKE: LAFARGE, TEXA, STP, BENGAL AQUAFLUX.

M&L for antitermite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2(1 cement : 2 coarse sand) to match the existing floors complete all as specified.

M&L for anti termite treatment of voids in masonry using chemical emulsion one litre per hole at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified

Demolition of cement concrete (un-reinforced) in ground floor and in paving not exceeding 15 cm thickness ( below or above ground level) complete

M&L 75mm thick PCC (1:4:8) type B2 using 40mm graded aggregate as in sub base of interlocking tiles complete all as specified as directed.

M&L for Sand filling/ soil whenever required incl watering, ramming/ rolling and finishing to required size/shape etc n exc 25cm thick high from base all as specified as directed

M&L for 60mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thick M-35 Grade with grey cement and pigment of any pattern as approved by GE and as per manufacture Instruction complete all as specified.

M&L for pre cast cement concrete block masonry 1:2:4, type B-1, using 20mm graded stone agg as in kerb stone,made to shape and size as directed and set and jointed in cement mortar 1:4 including necessary excavation and earth work and removing surplus soil to distance not exceeding 50 mtr complete all as specified.

M&L PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

RCC NP-3 150mm dia pipes laid on 150mm thick PCC 1:4:8 bed with excavation in any types of soil incl man holes/drop man holes of standard size made of brick masonry with ventilating cover and frame. Includes all items and activities to execute and make sewer lines functional. Depth of Sewage 0.70 mtr to 1.65 mtr.

Cutting into existing manholes for connecting new drains, of 150 mm bore pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished, reforming benching as required, complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc (Inner girth measured only).

M&L Cement concrete type D2, 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:3.

M&L Cement concrete type B2, 1:2:4 using 20mm graded stone aggregate in surface channels and drains.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed.

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring aluminium/ copper from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets,bell push , ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Paris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

M&L for concealed point wiring on wall and ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 20 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge

One light /Fan/Bell point controlled by one switch 6/5 Amp one way single pole.

One 3 pin socket outlet 6/5 Amps controlled by one switch on the same board with other switches.

One 3 pin 6/5 Amp socket outlet controlled by one switch independent board.

All as per item Srl No 132 above but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

S&F switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified and as directed.

S&F switch piano flush type (ISI marked), single pole, one way 16/15 Amps, 240 Volts including complete all as specified and as directed.

S&F socket outlet 3 pin, 6 Amp piano flush type including complete all as specified and as directed.

S&F socket outlet, 2 in 1, 3/5 pin 6 / 16 Amp, piano flush type complete all as specified and as directed

S&F ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals complete all as specified and as directed.

S&F for batten angle lamp holder insulated body with back plate suitable for batten fittings including complete all as specified and as directed.

S&F Wall mounted LED batten 18/20 Watt with 01 No LED tube rod, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed. Make crompton/Havells/Wipro

Taking down and refixing of old serviceable LED tube light fitting /Bulk head fitting any type any watt all as specified and directed

Taking down and re fixing old serviceable ceiling fan any type any size including replacement of connecting wire and clamp and rubber real all as specified and directed.

S&F medium step type fan regulator 80 Watt, 240 Volt AC, socket size, medium step" ISI marked complete all as specified and directed.

S&F Wall mounted Mirror light LED fitting, 10 Watt, 2 Feet long incl integrated electronic driver including dismantling taking down unsv sketch fitting any type complete all as specified and directed.Make- Havells/CG/Philips/Wipro

S&F LED Lamp 10 Watt CDL B-22 Cap base holder, 230 volts Make Wipro/Crompton/Phipils

S&F LED building security light 36 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade suitable size dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismentling taking down unsv fitting any type all as specified and directed. Make- Crompton/Havells/Philips/Wipro

S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep 900 RPM with louver including cutting of hole of adequate size including making good existing surfaces incl fixing with MS fasnut all as specified and directed Make- Crompton/Bajaj/Havells

S&F MCB SPN, 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Make: Schneider Electric/Legrand/L & T

S&F MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Make - Schneider Electric/Legrand/L & T.

S&F in replacement of old DB by SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 12 way, confirming to IS 13032 & 8623 complete all as specified and directed.

S&F in replacement of old DB by TPN Distribution Box vertical, double door of protection grade IP 43 fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way, confirming to IS 13032 & 8623 including chasing/cutting of wall and concealed and making good as existing surface complete all as specified and directed.

S&F MCB TPN, 63 Amps 415 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

M&L for sub main wiring with two run of FRLS PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 6.0 Sqmm, 1100 Volts grade and one run of 4.00 Sqmm FRLS PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments incl PVC conduit and drawing in PVC rigid conduit 25 mm dia , connecting incoming / outgoing electric connections by using required size copper lugs / thimbles and making good the disturbed surface to match with existing complete in all respect all as specified and directed. Note :- 1. Two run of single core cable with one run of contineous earth wire of copper conductor wire Flexible (Multistrand) of FRLS PVC and PVC pipe insulated shall be measured and paid as one unit length.

M&L for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in deep getting out in soft/loose soil for stay assembly/laying of cable/errection of poles etc complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

M&L for dry Sand cushioning in trenches for protection of cable including watering and consolidation all as specified and directed. Note: Punned thickness shall be considerd for measurment purpose

M&L for well burnt brick sub class B old size laying in trenches perpendicular to axis of the cable complete all as specified and directed.

Supply and laying in trenches/Floor or fixed to Pole/Wall GI pipe light grade with fitting of size 50 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engineer-in-Charge.

M&L for cutting of PCC/Hard standing/WBM road not exceeding 20 cm in width not exceeding 30 cm in depth for passing of LT cable and making good of disturbed surface to match with the existing surfaces by using old and new material i.e bitumen/PCC (1:3:6) type C-1 complete all as specified and directed .

Taking out existing worn out/old PVC insulated cable in 3.5 core of 50 sqmm to 35 Sqmm size of 1100 Volt grade in pieces from trenches making loop for transportation and removal from site after taking proper shut down from MES compitent staff complete in all respect and as directed at site.

M&L for fixing or passing through pipe, laid in trenches or fixed to pole/wal or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 35 Sqmm 3.5 core with required aluminium cable lugs all as specified and directed. Make of Cable : Havells, Polycab, Gloster,Finolex

MAHADEV ENTERPRISES

S.K CONSTRUCTION

DAVINDER SINGH

Alishan Builders