PROVN OF CHAIN LINK BOUNDARY FENCING

Amount

S&F 10 mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 7 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and directed.

M&L for Bonded mineral wool blanket slab made from glass density 24 kg/ cum and fixed as per manufacturers instuctions, 40mm thick one side of blanket/ slab (of any thickness) covered with polythene based jute hessian cloth complete all as specified and directed.

M&L for complete removal of existing treatment and preparing the surface and applying two coats of distemper oil emulsion over 3mm thick wall care putty on wall complete all as specified and directed.

Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over one coat of red oxide primer including preparing new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc on steel surfaces of any description complete all as specified and directed.

S&F framing of hollow tube of any size and corrner hollow pipe on wall shall be fixed with screw and plug on wall.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/ disintegrated rocks, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

S&F MS post and struts in fencing including cutting tops to shape as swan neck drilling holes notching for wire etc and flat iron fillets for securing wire mesh etc confirming to Fe 410 or Fe 250 Gde 165 E complete all as specified and directed.

Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm and n exc 10 cm long and dia of neck 11 to 15 mm complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc including taking down old barbed wire complete all as specified and directed.

Supply only chain link fencing mild steel galvanised mesh size 100 x 100 mm of 4mm GI wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wirecomplete all as specified and directed.

S&F 10mm dia round bars as stiffening member in fencing including securing the fencing confirming to Fe-410-W (gde - E-250) quality A or Fe-290 ( Gde E-165) as link complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded aggregates as in foundation of RCC post or struts incl necy formwork complete all as specified and directed.

Excavation in trenches not exc 1.5 m in width and 1.5m in depth and getting out in hard/ dense soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded aggregates as in foundation, filling and mass concrete incl necy formwork complete all as specified and directed.

Formwork to fair finished sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.

Formwork to fair finished surfaces to sides of pillar, posts, struts , piers, columns and stanchion.

M&L for RCC 1:2:4 type B-1 (Using 20 mm graded aggregate ) as in foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. Note : Formwork and reinforcement shall be measured and paid separately.

M&L for RCC 1:2:4 type B-1 (Using 20 mm graded aggregate) as in Columns, pillars, piers, posts and struts. Note : Formwork and reinforcement shall be measured and paid separately.

S & F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

All as per Srl Item No. 23 here-in-before but TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders.

M&L for PCC 1:2:4 type B-1 using 20mm graded aggregates as in coping incl necy formwork complete all as specifed and directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of bricks or concrete surfaces finished even and smooth w/o using extra cement.

Returning filling in, including spreading leveling watering and well ramming in layers not exceeding 25 cm thick, in any type of soil complete all as specified and directed.

Removal of surplus soil of distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.

M&L for MS work as in gate framed work of angle or other section with gusset plates and braces etc complete all as specified and directed.

M&L for preparation of newly plastered wall surface and applying 3 coats of white wash complete all as specifed and directed.

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil complete all as specified and directed.

M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregates as in sub base finished rough complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-2 using 40 mm graded aggregates as in flooring finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) precast cement concrete block masonary with solid blocks exc 10 cm in width and setting in CM 1:4 etc complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded aggregates in walls or retaining wall any thickness size or shape incl pilasters, buttress coloumn, pillars , boundary pillars, and post (incl caps and butresses) incl necy formwork.

M&L for 15mm thick rendering in CM 1:3 on fair faces of brick and concrete surfaces finished rough to receive granite on walls complete all as specified and directed.

Material and labour for granite (of any type) table rubbed and polished in steps, jambs, pillars, window cills, cooking platform and like in CM 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any shade complete all as specified and directed.

Preparing newly plastered surfaces of walls and applying two coats of Cement Base Paint on wall surfaces over a coat of alkali resistant primer.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregates as in sub base finished rough complete all as specified and directed.

M&L for screed bed or bedding layer 15 mm thick in cement mortar 1:6 finished rough for laying floor tiles etc complete all as specified and directed.

M&L for Non-skid ceramic tiles 7 to 8 mm thick coloured tiles( square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded aggregates as in plinth protection finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for PCC type C2 1:3:6 (using 40 mm graded aggregates) in surface channels ,drains of any thickness incl necy formwork complete all as specified and directed.

S&F steel work in tubular trusses incl special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade Fe-415 complete all as specifed and directed.

S&F stairs (framed) incl stringers, treads, landing, balusters, hand rails etc incl cleats and brackets etc complete all as specified and directed.

S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour havimg tensile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed complete all as specified and directed.

S&F Pre-Painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour havimg tensile strenght of 550 Mpa as in ridges and eaves , fixed with self tapping screws as specified and directed complete all as specified and directed.

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.

M&L for screed bed or bedding layer 20 mm thick in cement mortar 1:6 finished rough for laying floor tiles etc complete all as specified and directed.

Material and labour for chequered cement concrete tiles (20cmx20cmx25mm) thick, set jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed.

M&L for providing 35mm thick precast cement concrete type C-0 (1:3:6) using 12.50mm graded aggregates as in louvers/jallies, (measured solid) incl all mouldings but excl frame. (Note: Precast frame shall be measured and paid separately)

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (Using 20 mm graded aggregate) as in slabs suspended on walls, beams, in floor, roofs, landings and in shelves and the like complete all as specified and directed. Note : Formwork and reinforcement shall be measured and paid separately.

Formwork to fair finished surfaces of walls, retaining walls, abutments, parapets and staircase railings and similar work incl attached pilasters, butresses etc vertical or to batter.

M&L for walling of random rubble, uncoursed well bonded and solidly hearted and built in cement mortar 1:6 complete all as specified and directed.

Extra over stone walling granite or trap stone for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40 mm and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.

M&L for raised pointing to random rubble masonary uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed.

Supply and fix PVC (SWR) pipes single socketed 75 mm dia in any length with rubber ring joints fixed to walls, clamps/hook for holding of pipe etc complete all as specified and directed.

M&L for hand packing with broken stone/ boulder behind backing of retaining wall, in layers etc complete all as specified and directed.

M/s Paramount Association of India

M/S DK TRADERS

M/S SUNRISE CONSTRUCTION AND CO

D.P. Traders

M/S R D TRADERS

M/S RARAI ENTERPRISES

M/S SM ANSARI