Loading
Loading…
Loading…
Tender Value
₹15.3 L
EMD Value
₹30,540
Closing Date
15 Jun 2026, 5:00 pm
Executive Director (Works) , ADMA
Amber Development and Management Authority Old Vidhan Sabha Bhawan, Near Hawa Mahal, Jaipur
Comprehensive Annual Maintenance and Operation of Special Illumination work and complete electrical system including other lights and fountains, DG set, etc. at Vidhyadhar Ka Bagh, and Sisodiya Rani Ka Bagh, Jaipur
2026_Amber_565167_1
03/2026-27
Open Tender
Electrical Works
365 days
Vidhyadhar Ka Bagh and Sisodiya Rani Ka Bagh
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
Chief Executive Officer, ADMA
₹30,540
5 Jun 2026
5 Jun 2026
16 Jun 2026
5 Jun 2026
15 Jun 2026
5 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1Providing & Fixing of IK08 IP-66 protected high power LED flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each . Integrated potted driver as a unique BIS R number having efficiency more than 85 % and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy >=125 lm/ wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety .Power Factor >0.95 , THD(I) <10% , driver current <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector , Surge Protection Min >=4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700K ±355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . (18.11.3) | ||||||
| 1.1 | High Power LED Flood Light Minimum lumen output 10400 lm | 15 | Each | 3,603 | ₹54,045 | Item 2 |
| 2Providing & Fixing of IK07 IP65 protected Top/Bottom mounted LED Post top Luminarie top & bottom made of single piece construction powder coated die cast alluminium housing with UV stabalized Clear / frosted Polycarbonate diffuser and Aluminium anodised with powder quoted reflector. The System level Luminous efficacy ≥ 80 Lumen/W. SMD LEDs is to be used, System CRI>70, CCT: 3000/4000/6500 K. The integral electronic driver must be potted & has a unique BIS R number constant current and Internal/external surge protection device of min. 4KV(L-N) and efficiency > 85%, PF>0.9, THD<10% and input Voltage range of 140-270V AC at 50Hz. System life of 50000 Burning hours with 70% of Initial Lumens maintained . LED Driving output current <750mA as required. (18.10.3) | ||||||
| 2.1 | Minimum lumen output 3600 lm Post top Luminarie | 5 | Each | 6,340 | ₹31,700 | Item 4 |
| 3Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. (11.3.1.2) | ||||||
| 3.1 | 1.5 Sq. mm 3 Core | 350 | Mtr | 99 | ₹34,650 | Item 6 |
| 4Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. | ||||||
| 4.1 | 6.0 Sq. mm 4 Core (11.2.2.3) | 100 | Mtr | 146 | ₹14,600 | Item 8 |
| 4.2 | 10.0 Sq. mm 4 core (11.2.3.3) | 100 | Mtr | 179 | ₹17,900 | Item 9 |
| 4.3 | 16.0 Sq. mm 4 core (11.2.4.3) | 100 | Mtr | 217 | ₹21,700 | Item 10 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.91 MB
Item01.pdf
Tender Documents • 0.89 MB
BOQ_1005878.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid