TD-546/26

Fabrication, Galvanizing, Inspection and Supply of Double Circuit Monopole with required extension, Anchor Plate and bolts, Washers, ladder and Anti Climbing Device

220kV DC Monopole type MPDB+20mtr

220kV DC Monopole type MPDB+21mtr

220kV DC Monopole type MPDB+24mtr

220kV DC Monopole type MPDD+21mtr

220kV DC Monopole type MPDD+24mtr

220KV Cable Termination CT Monopoles

Monopole Accessories

Number plate

Danger Plate

Phase plate

Circuit plate

Pipe Type Earthing Material

Composite Sillicon Rubber Insulator String

160 kN polymer insulator, suitable for 220 kV tension fitting, complete in all respects as per approved technical specifications and relevant IS/IEC standards.

70 kN polymer insulator, suitable for 220 kV single I-pilot suspension fitting, complete in all respects as per approved technical specifications and relevant IS/IEC standards.

Supply of HTLS conductor, offered as equivalent to ACSR Zebra conductor, conforming to approved technical specifications and relevant standards, complete in all respects.

Supply of complete hardware fittings suitable for the offered HTLS conductor technology, equivalent to ACSR Zebra conductor complete in all respects as per approved technical specifications and relevant standards.

Single Tension Fitting

Double Tension fitting

Single Suspension fitting for pilot string

Supply of conductor accessories suitable for the offered HTLS conductor technology, equivalent to ACSR Zebra conductor, complete in all respects as per approved technical specifications and relevant standards.

Vibration Dampers

MS Joint

Repair Sleeves

Performed Armoured Rod

Connectors & Accessories

OPGW And Accessories

48 Fibre (DWSM) OPGW Fibre Optic Cable

Supply of Hardware set for 48 Fibre OPGW*

Joint Box 48 Fibre

FODP 96F

Supply of fibre approach cable suitable for 48-fibre OPGW, complete with all accessories, suitable for termination between OPGW joint box and control room / communication equipment, as per approved technical specifications and relevant standards.

Supply of complete hardware set for 48-fibre (DWSM) fibre optic approach cable, including clamps, brackets, supports, fasteners and all associated accessories, suitable for installation from OPGW joint box to control room, as per approved technical specifications and relevant standards.

TOTAL SUPPLY

Tender No:

Bidder Name & Address :

Survery including preparation of final Tower Schedule material, marking of location(route length) and super impose of GPS Coordinates of diverted locations, on elevated plan to get the clearance from existing building/structures before start of Work

Check survey and final peg marking of transmission line route, including verification of alignment and final marking of monopole locations, complete in all respects as per approved drawings and directions of Engineer-in-Charge.

Soil investigation for transmission line / substation works, including field exploration, collection of soil samples, laboratory testing, and submission of soil investigation report with recommendations for foundation design, complete in all respects as per relevant IS codes and directions of Engineer-in-Charge.

Designing of Monopoles and respective foundation suitable for 220KV Double Circuit HTLS Conductor with required extension and nut bolts washers and ladder etc with duly approved from IIT

220kV DC Monopole type MPDB+20mtr

220kV DC Monopole type MPDB+21mtr

220kV DC Monopole type MPDB+24mtr

220kV DC Monopole type MPDD+21mtr

220kV DC Monopole type MPDD+24mtr

220KV Cable Termination CT Monopoles

Cost of foundation of monopoles including excavation, piling, reinforcement, setting of monopole template, fixing of foundation bolts, concrete backfiling etc for all types of monopoles and there respective entensions whereever required including cost of cement, dewatering, shuttering, forming and curing icnluding cost of reinforcement, cementing, reinforcement bars with M25 Concrete.

Cost of excavation of various 220kV DC monopoles and foundation pits including all earth work, back filling, levelling etc

Cost of concreting for 220kV DC monopoles foundation including cost of cement, dewatering, shorting and shuttering, forming & curing but excluding cost of reinforcement bars with 1:1.5:3 mix concrete.

Cost of piling upto 10mtr depth as per requirement of set cost also includes laying of reinforcement and bentronite bags but excludes the cost of reinformcement ad concrete. One job defined as the work at one location.

Cost of setting and alignment of bolts alongwith sacrificial and normal template for 220kV DC monopoles

Insltallation of steel reinforcement bars in RCC foundation including cost of steel reinformcement bars with cutting, bending, placing and binding etc.

Dismantling of dividers/pedestral area, road etc at locations for the wrok & making good after completion of work.

Providing barricades for avoiding any incident during the period of excavation to backfilling of soil and during erection works for traffic movement( 1 Job includes one location work)

Erection of Monopoles including all accessories and above ground level Work

220kV DC Monopole type MPDB+20mtr

220kV DC Monopole type MPDB+21mtr

220kV DC Monopole type MPDB+24mtr

220kV DC Monopole type MPDD+21mtr

220kV DC Monopole type MPDD+24mtr

220KV Cable Termination CT Monopoles

Ground work including Pipe Type Earthing including cost of Coke and Salt

Cost of HTLS Conductor Stringing including all conductor, monopole and hardware accessories

Laying, Strigning , tension clamping, jointing etc of all 3 phases of HTLS Conductor including hoisting of insulators, fitting of all accessories i.e. fittings, armour rods, vibration dampers etc alongwith all related works upto energisation of line

Cost of OPGW Conductor Stringing including all accessories

Installation, laying, test and commissioning of all links etc of 48Fibre(DWSM)OPGW Fibre Optic Cable alonghwith all necessary hardware sets excluding joint box

Installation and Splicing of Joint Boxes

Total WORK

The quantities mentioned above are provisional and can vary as per actual requirement/as per approved BOQ.

Bidder Name:

Name & Address of Company

(A) 220 KV Structures For Existing 220 KV Substations

Without Anchor Bolts

C.T. / P.T. / C.V.T.

Total:-

Supply :-

Bolted type Tension fitting

220 KV main bus-I extension twin tarantulla

220 KV main bus-II extension twin tarantulla

220 KV transfer bus extension twin zebra

220 Kv jack bus for new b/c bay twin zebra

132 KV main bus-I extension twin moose

132 KV main bus-II extension twin moose

132 KV main bus-I replacement by twin moose

132 KV transfer bus extension single tarantulla

132 Kv jack bus for new line bay single moose

Total:-

Bolted type suspension fitting

220 KV main bus-I extension twin tarantulla

220 KV main bus-II extension twin tarantulla

220 KV transfer bus extension twin zebra

220 Kv jack bus for new b/c bay twin zebra

132 KV main bus-I extension twin moose

132 KV main bus-II extension twin moose

132 KV main bus-I replacement by twin moose

132 KV transfer bus extension single tarantulla

132 Kv jack bus for new line bay single moose

Total:-

4 Bolted type PG Clamp

220 KV transfer bus extension twin zebra

220 Kv jack bus for new b/c bay twin zebra

132 KV main bus-I replacement by twin moose

132 Kv jack bus for new line bay single moose

Total:-

SCHEDULE-3

Summary

Construction of 220KV Double Circuit Line from 400KV GIS S/s Sector-148 Noida to 220KV S/s GIS Sec-155 Noida on HTLS Conductor

Tender No:

Total Price for Supply [Schedule-1 ]

Total Price for Erection [Schedule-2]

Net Lump Sum Bid Prices ( without GST)

Net Lump Sum Bid Prices ( with GST)

GUARANTEES, LIQUIDATED DAMAGES FOR NON – PERFORMANCE

1. The equipment offered shall meet the rating and performance requirements stipulated in Technical Specification for various equipment or indicated in Data requirement.

2. The ratings and performance figures of the below mentioned equipment are guaranteed by you.

Offered technology HTLS Conductor (equivalent to Zebra)