Construction of Washroom at Guard Hut Gurha Surja of Jasrota WLS in Wildlife Division Kathua Under CAMPA 2024-25

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth 50 metres from 1 mtr cutting edge

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:5:10 (1 cement: 5 coarse sand :10 graded stone aggregate 40mm nominal size) (A) Crushed inculding all Mechanical and Head load carriage with complete job

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size inculding all Mechanical and Head load carriage with complete job

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) inculding all Mechanical and Head load carriage with complete job

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing : Cement motar 1:6 ( 1 cement : 6 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:11/2:3 (1 cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) inculding all Mechanical and Head load carriage with complete job

Steel reinforcement for RCC work straightening cutting bending placing in postion and binding all completed upto plinth level thermo-Mechanically treated bars of grade Fe-500D or more

Centring and shuttering including strutting, propping etc. and removal of form for· Suspended floors, roofs landings balconies and acess platforms.

Cement conrete flooring 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 40 mm thick with 20 mm noimal size stone aggretage.

15 mm cement plaster on the roughside of single or half brick wall of mix 1:6 (1 cement: 6 fine sand)

12 mm cement plaster on the roughside of single or half brick wall of mix 1:6 (1 cement: 6 coarse sand)

6 mm cement plaster to celling of mix 1:3 (1 cement: 3 fine sand)

Distempering with dry distemeber of approved brand and manufracture (two or more coats) and reuired shade on ew work, over and icluding wter thinnable priming coat to give an even shade.

Finishing walls water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10 sqm)

Providing and fixing pressed steel door frames conforming to 15: 4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B

Providing and fixing 30mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 12 mm thick Marine plywood conforming to IS: 710

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Float glass panes 4.0 mm thick glass pane (weighing not less than 10 kg/sqm)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete .Fixed to steel windows by welding

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, one or more coats on new work.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Provision for electrical, sanitary works and other contingencies as required by Wildlife Department- To be paid as per actual at LMR/SSR rates whatever will be lower. The contractor concerned shall submit the detailed estimate for the same based on the JKSSR/LMR as per the requirement of the Wildlife Protection Department.. All complete job.

Cariage of Sand

Carriage of Aggregate

Carriage of Bricks

SIMRANJEET SINGH (BID ID -2306602)

RAHUL JASROTIA (BID ID -2306389)