SITC of electric pump

Amount

Supplying, Installation, Testing and commissioning of 01 No. 250 KW/335 HP, 3-Phase, 4 - pole, 415 Volts ± 10 %, 50 Hz ± 5 %, 1500 RPM, with 'F' Class insulation and temperature rise limit upto class 'B' and has to be Totally Enclosed Fan Cooled/IE2/HFM Squirrel cage induction motor similar to Kirloskar / Crompton Greaves make coupled with Water Pump similar to RKB 200 /37, 4-Stage of Kirloskar make or equivalent with C.I make, C.I impeller discharge of 468 Cum/Hr at a head of 110.00 Mtrs. including supplying and installation of base frame with foundation bolts and nuts, coupling assembly, coupling guard etc. as required.

Supplying, Installation, Testing and Commissioning of Fully Automatic Star - Delta Starter Panel suitable for 250 KW/335 HP, 3-Phase, 4 - pole, 415 Volts ± 10 %, 50 Hz ± 5 % complete with inter connections with 25 mm X 5 mm copper strip etc. as required. The FASD Starter comprising with start & stop push button with following electrical accessories and should have inner earthing, one coat of primer and 2 coat of finishing water proof paint etc.as required and embedded its four legs in the ground at the depth of 15 .00 cm with in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size). a) Three Pole Power Contactor (2NO+2NC), Type ML-12, L&T Make : 03 Nos. b) Thermal overload relay, Type MN12 (CT operated), Range (270 A to 450 A) : 01 No. c) Single Phasing Preventor Make L&T, Model SM 301:01 No d) Electronic Star - Delta Timer, Make L&T, Model ST 100 :01 No. e) Load Isolator 40 A, 415V, 3- pole : 01 No

Supplying, Installation, Testing and Commissioning of indoor type floor mounted cubical panel board made of not less than 1.10 mtrs. X 0.60 mtrs X 0.40 mtrs. non extendable type L.T - 3 phase 440V, 630 Amps (Thermal - Magnetic Release) with both side open i/c front double hang shutter with locking arrangement with locking arrangement made of 18 SWG thick CRCA sheet in different compartment to accommodate switch gear, i/c supplying and fixing of 01 No. 630 A, four pole MCCB (L&T Make, DN3 630S), 01 set of Bus bar (RYBN), Multifunctional meter, 03 Nos. C.T coil class B (800:5) and indicating lamps (RYB) . The panel should have inner earthing, one coat of primer and 2 coat of finishing water proof paint etc.as required and embedded its four legs in the ground at the depth of 15 .00 cm with in cement concrete 1: 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size).