Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹5.0 LAccepted-AOC 1072 PADIMAR INDIRA MARKET BALCO VILLAGE TOWN KORBA CITY KORBA KORBA CHHATTISGARH 495684 INDIA | KORBA | CHHATTISGARH | 495684 | L-1 | Accepted-AOC The work is awarded to L-1 bidder | |
| 2 | Rejected-Technical ADARSH NAGAR KUSMUNDA KORBA CG | KORBA | KORBA | CHHATTISGARH | - | Rejected-Technical DUE TO L-3 BIDDER | |
| 3 | Rejected-Technical MIG 80 R P NAGAR KORBA CG | KORBA | KORBA | CHHATTISGARH | - | Rejected-Technical DUE TO L-5 BIDDER | |
| 4 | Rejected-Technical SUBHASH NAGAR KATGHORA ROAD DIPKA DIST KORBA CG | KORBA | KORBA | CHHATTISGARH | 495452 | - | Rejected-Technical DUE TO L-2 BIDDER | |
| 5 | Rejected-Technical AT PO RAJRAPPA PROJECT DIST RAMGARH JHARKHAND 829150 | RAJRAPPA PROJECT | RAMGARH | JHARKHAND | 829150 | - | Rejected-Technical DUE TO L-4 BIDDER |
Tender Value
₹9.5 L
EMD Value
₹11,900
Closing Date
3 Sept 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GM CIVIL GEVRA AREA
Office of the General Manager , SECL, Gevra Area, PO Gevra Project, Distt.- Korba (CG)Contact No. 9425534061
Repair and maintenance of Saraswati Shishu Mandir at Bhilai Bazar Village near Gevra Area
2022_SECL_254008_1
SECL /GA/ GM(C) / ETN/ 22-23 /95 dtd. 20.08.22
Open Tender
Civil Works - Others
Item Rate
60 days
Gevra Area
Please refer Tender documents.
3 documents required · 3 mandatory
₹11,900
26 Oct 2022
23 Aug 2022
5 Sept 2022
23 Aug 2022
3 Sept 2022
24 Aug 2022
23 Aug 2022 - 27 Aug 2022
120 days
Amount
Item Description/ Heading
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
Extra for providing and fixing wind ties of 40x 6 mm flat iron section.
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
Brick work in cement mortar 1:6 (1 cement 6 coarse sand) with fly ash bricks of size 230x110x70 mm and having crushing strength of 75 Kgs/Sqcm to 100 Kgs/Sqcm as per the specification : Foundation & Plinth.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
White washing with lime to give an even shade : Old work (two or more coats)
Finishing walls with water proofing cement paint of required shade : Old work (one or more coats @ 2.20 kg/10 sqm) complete.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)
Carriage of material by Mechanical Transport including loading, unloading and stacking Lime, moorum, building for a lead of 1 Km
Total impact of GST for the purpose of CTC
Ramesh Kumar
ABKASH SINGH
SANTOSH KUMAR
BHAKULAL SAHU
stage.html
html • 0.04 MB
techsummary_262567.pdf
PDF • 1.53 MB
finsummary_262567.pdf
PDF • 1.53 MB
LOA832.pdf
PDF • 5.10 MB
finance_262567.pdf
PDF • 0.19 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .