Protection of Nashatra (Fulbari) village from the erosion of river Alpajan on its L/B.

Felling trees including uprooting roots and stumps up to 50 cm. below ground, cutting into pieces and removing the same from the site of work etc. complete as directed. Trees above 0.50m and up to 1m girth:

Cutting bamboo, uprooting roots & stumps including removing them from the site of work, etc. complete as directed.

Earth work in embankment by tractor trailer carriage by Mechanical means with locally available ordinary/normal soil excluding sandy and rocky soil free from roots & vegetation and filling in uniform layers not exceeding 25 cm thick including ploughing or roughening or benching the seats, removing all debris, breaking clods up to 4cm cube, dressing as per design section and compaction with three wheel static roller of 80-100 KN capacity in layers not exceeding 30 cm in thickness and core cutter soil test at every layer and every 500m distance, etc. complete as directed. For initial lead up to 1 Km and for all lifts For beyond initial 1 Km & up to 10 Km & for all lifts. Total Lead =3Km.

Turfing with grass sods of largest possible rectangles of 12 cm. minimum thickness placed closely including dressing earth pegging with Jati bamboo split, watering till the grass grows for a lead up to 90 m and all lifts, etc. complete as directed.

Earthwork in bank trimming to the designed section /slope by manual means including removing the trimmed soils to a minimum distance of 30 m, complete as directed.

Earth work in excavation of drainage channel to the proper grade and slopes as required including disposing the excavated debris/soil to a safe distance of minimum 50 m distance, etc. complete as directed. For lead up to 50 m and all lifts. Normal soil

Supply of Geo-textile bags of type-A (1.03 × 0.70 m) inner to inner made of Geo-textile non-woven fabric sheets of 400 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as per IS 16653:2017 i. Wide Tensile strength (MD) ≥ 20KN/m & Wide Tensile strength(CD) ≥20 KN/m ii. Elongation (MD) ≥50% & Elongation (CD) ≥ 50% iii. Abrasion ≥ 95% iv. Trapezoidal Tear Strength (MD) ≥ 450N & Trapezoidal Tear Strength (CD) ≥ 450N v. CBR Puncture strength ≥ 4000N vi. Permittivity ≥ 1.10s – 1 vii. Permeability ≥ 40l/m2/sec viii. AOS ≤ 75 micron ix. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% x. Mass ≥ 400 gm/m² xi. Thickness at 2KPa ≥ 3 mm xii.Seam strength ≥ 80 % of actual fabric strength. Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Bags are to be supplied of 100 numbers in a bundle, properly packed with each bag having proper tag with name of Manufacturer, Batch Number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with “WRD Govt. of ASSAM” to be printed distinctly. Test Certificate from approved NABL accredited and ISO (Certified Laboratory should invariably be submitted against each batch of material)

Supply of Geo Bags Type-B (Size 2.00 m × 1.50 m inner to inner) (Pillow Type) made of composite layers of Polypropylene (PP) fibre as per IS 16653:2017 for Nonwoven and IS 16654:2017 for Woven: Woven Geo-textile for the outer cover (300gsm): The woven geo textile is woven with multifilament woven fabric manufactured from ultra violet stabilized polypropylene. Geo-textile used to manufacture geo-textile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and U.V. resistance characteristics. Geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids. Properties i. Tensile strength (MD) ≥ 80 KN/m & Tensile strength (CD) ≥ 70 KN/m ii. Elongation (MD) ≤ 25% & Elongation (CD) ≤ 25% iii. Abrasion ≥ 75% iv. Trapezoidal Tear Strength (MD) ≥ 1500N & Trapezoidal Tear Strength (CD) ≥ 1300N v. CBR Puncture strength ≥ 900N vi. Permeability ≥ 18 l/m2/sec vii. AOS ≤ 250 micron viii. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% ix. Mass ≥ 300 gm/m² x. Seam strength ≥ 50 % of actual fabric strength. Non-Woven Geo-textile for the inner layer (300gsm): It is needle punched non-woven geo-textile made of 100% polypropylene staple fibres which are formed into a random network for dimensional stability. It should resist UV degradation, rotting and alkalis. Properties i. Wide Tensile strength (MD) ≥ 15 KN/m & Wide Tensile strength (CD) ≥ 15 KN/m ii. Elongation (MD) ≥ 50% & Elongation (CD) ≥ 50% iii. Abrasion ≥ 95% iv. Trapezoidal Tear Strength (MD) ≥ 340 N & Trapezoidal Tear Strength (CD) ≥ 340 N v. CBR Puncture strength ≥ 3000 N vi. Permittivity ≥ 1.25 s-1 vii. Permeability ≥ 60 l/m2/sec viii. AOS ≤ 75 micron ix. UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% x. Mass ≥ 300 gm/m² xi. Thickness at 2KPa ≥ 3 mm xii. Seam strength ≥ 80 % of actual fabric strength. Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge. (Bags are to be supplied of 15 numbers in a bundle, properly packed with each bag having proper tag with name of Manufacturer, Batch Number, the GSM and type of polymer encrypted and stitched on top corner and each bag is to be marked with “WRD Govt. of ASSAM” to be printed distinctly. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material)

Supply of Rope Polypropylene (PP) Gabion of size 2m × 2m × 0.45 m having the following properties i. Mesh opening size 150 mm × 150 mm ii. Rope Diameter of 9.0 mm iii. Linear Density of rope ≥ 65.1 gm/m iv. Tensile Strength ≥ 1900 Kg v. Abrasion Resistance of rope after 1000 cycles ≥ 65% vi. CBR Puncture Strength ≥ 7000 Kg.;

Supply of non-woven Geo-textile fabric sheets of 300 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as per IS 16653: 2017 • Wide Tensile strength (MD) ≥ 15kN/m & Wide Tensile strength (CD) ≥ 15kN/m • Elongation (MD) ≥ 50% & Elongation (CD) ≥ 50% • Abrasion ≥ 95% • Trapezoidal Tear Strength (MD) ≥ 340 N & Trapezoidal Tear Strength (CD) ≥ 340 N • CBR Puncture strength ≥ 3000 N • Permittivity ≥ 1.25 s-1 • Permeability ≥ 60l/m2/sec • AOS ≤ 75micron • UV Resistance @ 500 hours retained Tensile strength (MD) & (CD) ≥ 80% • Mass ≥ 300gm/m² • Thickness at 2KPa ≥ 3 mm. (Each Roll of Geo Fabric Sheet should be supplied in properly packed Bundles and should be marked with the Name of Manufacturer, Batch Number & its dimensions clearly on each roll with “WRD Govt. of ASSAM” to be printed on it and mentioning properly the GSM and type of polymer and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material).

Supply of Sewing Thread/Yarn PPMF Stitching Thread (2000 Den. Kaplon). i/c of payment of taxes.

Carriage of Geo Bags of size 1.03 × 0.70 m / 1.0 x 0.7m including loading & unloading, stacking, etc. complete and including hire charge of truck with driver and handyman cost of POL etc. completed as directed. Distance=90Km

Carriage of 300 gsm Geo sheet of including loading & unloading, stacking cost of P.O.L. etc. complete and including hire charge of truck with driver and handyman, etc. completed as directed. Distance=90Km

Carriage of Gabion box of size 2.0m × 2.0m × 0.45m including loading & unloading, cost of P.O.L. etc. complete and including hire charge of truck with driver and handyman, etc. completed as directed. Distance=90Km

Carriage of Geo Bags of size 2.00 x 1.50 m including loading & unloading , Stacking cost of P.O.L. ,etc. complete and including hire charge of truck with driver and handyman completed as directed. Distance=90Km

Labour charge for laying Geo fabric sheet as filter bellow pitching including carrying, lapping, wrapping & stitching as directed by the Engineer-in-Charge.

Filling and laying of nonwoven Geo - textile bag of dimension 2.00 m × 1.50 m excluding excavation of specified sand/silt from flood plain or adjacent chars within a distance of 90 m of the work site, filling geo bags with sand having minimum volume 0.612 Cum after filling, double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, laying at proper site including all handling charges and local carriage within a distance of 100 m complete as directed. (Sand/silt, Geo Bag and Polypropylene thread will be supplied by the department free of cost) With Engine Boat.

Filling and laying of polypropylene gabion boxes 2.0 m × 2.0 m × 0.45 m filled with sand filled Geo bags of size 1.03 m × 0.70 m excluding excavation of sand/silt from flood plain or adjacent chars within a distance of 90 m of the work site, filling geo bags with sand weighing 126.00 Kg after filling, double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, stacking the same in batches of

100 or part as directed carrying the same to the dumping site including all handling charges and local carriage within a distance of 150 m and laying properly. (Geo Bag, gabion box and Polypropylene thread will be supplied by the department free of cost)

Filling and laying of Geo bags of size 1.03 m × 0.70 m excluding excavation of sand/silt from flood plain or adjacent chars within a distance of 90 m of the work site, filling geo bags with sand/silt having minimum weighing 126.00 Kg and minimum volume 0.084 Cum after filling , double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150 m and laying properly as directed. (Sand/silt, Geo Bag and Polypropylene thread will be supplied by the department free of cost) Without Boat

Collection and supply of River silt by truck carriage free from debries and other foreign material, etc. complete as directed. By mechanical Means. For initial up to 1.00 Km & for all lifts.

Providing cast-in-situ PCC slab of size 0.5 m × 0.5 m × 0.15 m, made in proportion 1:2:4 on trimmed graded slope of river bank including ramming the seat, curing and all handling charges, etc. and complete as directed.

Excavation for Structures Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material

Laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kN as per Technical Specification Clause 412

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 A.With Crushed Stone P.C.C. grade M 20 i) Nominal mix (1:2:4)

Brick Masonry Work in cement mortar in foundation of Head walls complete exculding pointing and plastering as per drawing and technical specification Clause 1109 i)Brick Masonry in 1:3 cement mortar

Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. 1000 mm dia