Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.5 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹45.0 L+₹1.5 L (3.54%)Rejected-AOC MHN 284 DRIVER HILL VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | L2 | Rejected-AOC REJECTED | |
| 3 | L3₹46.0 L+₹2.5 L (5.75%)Rejected-AOC II D 30 JAI NARYAN VYAS COLONY BIKANER BIKANER RAJASTHAN 334001 | BIKANER | RAJASTHAN | 334001 | L3 | Rejected-AOC REJECTED | |
| 4 | L4₹47.6 L+₹4.2 L (9.59%)Rejected-AOC 301 CHAMUNDA ENCLAVE PLOT NO 89 AIROLI SECTOR 8A NAVI MUMBAI 400 708 | THANE | MAHARASHTRA | 400708 | L4 | Rejected-AOC REJECTED | |
| 5 | L5₹48.4 L+₹4.9 L (11.2%)Rejected-AOC | L5 | Rejected-AOC REJECTED |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
12 Oct 2020, 6:00 pmClosed
GE(NW)BHNADUP
GE(NW)BHNADUP,MUMBAI
REPAIRS TO STORM WATER DRAINAGE SYSTEM, FENCING,WALLS, FOOTPATH , HARDSTANDING INCL OTHER MISC B/R ITEMS AND DAY TO DAY CLEANNING AND REPAIRS TO SEWAGE SYSTEM INCL ALLIED ITEMS AT MO (MB) GHATKOPAR
2020_MES_378194_1
8859/B
Open Tender
Civil Works
Item Rate
274 days
GHATKOPAR
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE(NW)BHNADUP
₹90,000
27 Jan 2021
16 Sept 2020
15 Oct 2020
16 Sept 2020
12 Oct 2020
30 Sept 2020
17 Sept 2020 - 22 Sept 2020
Amount
Cleaning and removing of all sludge and divert etc from existing sewer line making frequent drainage in all respect of the 200mm bore sewer pipe or any description including removal of sludge out side of MD land complete all as specified and directed by Engr-in-Charge Note item No 1 to 10 :- any defects noticed during the period of contract the same shall be rectified by the contractor with out any cost.
All as per item No 1.00 here-in-before but 150 mm bore complete all as specified and directed by Engr-in-Charge
All as per item No 1.00 here-in-before but 100 mm bore complete all as specified and directed by Engr-in-Charge
Cleaning and desludging completely manhole or inspection chamber of any size up to 1.5 mtr depth including removal of sludge out side of MD land complete all as specifed and directed.
Cleaning and desludging completely manhole or inspection chamber of any size up to 1.5 mtr depth and not exc 3.0 Mtr depth including removal of sludge out side of MD land complete all as specifed and directed.
Cleaning and desludging completely of Soak well/septic tanks etc including Removal of water ,sludge by pumping/manually in foul position of any size up to 3.0 mtr depth including removal of sludge out side of MD land complete all as specifed and directed.
Cleaning of gulley trap any size including champer etc,removal of sludge out side of MD land complete all as specifed and directed.
Removal of choke up from Nahani trap bath room, kitchen and WC by any means to make the same functional ,removal of sludge out side of MD land complete all as specifed and directed..
M&L for Cleaning and desilting of area strom water closed drainage/culvert of inner girth up to & including 450mm of any depth including removal of cover slab and refixing of cover in position and making good all as directed at site including removal of silt/waste materials outside MD Land complete all as specifed and directed.
M&L for Cleaning and desilting of area strom water closed drainage/culvert of inner girth above 450mm of any depth including removal of cover slab and refixing of cover in position and making good all as directed at site including removal of silt/waste materials outside MD Land complete all as specifed and directed.
S&F in repairs 500 ltrs Rotational mould polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in ssr part-I complete all as specified and directed
S&F in repairs 1000 ltrs Rotational mould polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in ssr part-I complete all as specified and directed
S&F in repairs 2000 ltrs Rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in ssr part-I complete all as specified and as directed.
S&F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.
All as per item No 14.00 here-in-before but of size 25 mm dia.
All as per item No 14.00 here-in-before but of size 40 mm dia.
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed.
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed.
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and directed.
Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 40mm complete all as specified and directed.
S&F 15mm bore GI tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors.
All as per item No 21.00 here-in-before but 20 mm bore.
All as per item No 21.00 here-in-before but 25 mm bore.
All as per item No 21.00 here-in-before but 40 mm bore.
S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 25 mm bore complete all as specified and directed.
S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 40 mm bore complete all as specified and directed.
Excavation in trenches n exc 1.5m wide and n.exc 1.5m depth for man holes and sewarlines etc n exc 10 sqm on plan and nexc 1.5m in depth and getting out for hard/dense soil complete all as specifed and directed.
Demolition and breaking up 150mm drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar including bed concrete and removal of debris including sludge if any and side MD land complete.
All as per item No 28.00 here-in-before but 200mm drain pipes.
All as per item No 28.00 here-in-before but 300mm drain pipes.
M&L for reinforced concrete pipes class NP-2 ,200 mm dia laid and jointed complete with collars and all as specifed and directed.
All as per item No 31.00 here-in-before but 300mm drain pipes.
M&L 150mm dia SGSW drain pipes laid in trenches and jointed all as specifed and directed
M&L 200mm dia SGSW drain pipes laid in trenches and jointed all as specifed and directed
M&L concrete bed to 100 mm dia pipes of cement mortar 1;3;6 type C-2 including packing under and haunching against the side of pipes after they are laid and tested complete all as specifed and directed.
M&L concrete bed to 150 mm dia pipes of cement mortar 1;3;6 type C-2 including packing under and haunching against the side of pipes after they are laid and tested complete all as specifed and directed.
M&L concrete bed to 200 mm dia pipes of cement mortar 1;3;6 type C-2 including packing under and haunching against the side of pipes after they are laid and tested complete all as specifed and directed.
M&L concrete bed to 300 mm dia pipes of cement mortar 1;3;6 type C-2 including packing under and haunching against the side of pipes after they are laid and tested complete all as specifed and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm in hard / dense soil complete all as specifed and directed.
Removing Excavated soils exceeding 1.5KM but not exceeding 5 KM and depositing where directed.
Dismantling of MS works of any description such as ,ladders,gates work,grating etc, including necessary straightening of bends complete all as specified and directed.
Demolition of RCC of any description and in any position not otherwise specifically provided rainforced (rainforcement of cut as required to facilasite demolition etc) including removal of demolished materials out side of MD land complete all as specifed and directed.
M&L Precast cement concrete in 1:2:4 type B-1 (20mm graded agg.) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc complete all as specifed and directed.
S & F mild steel TMT bars 10 mm dia over, cut to length, bent to shape required including crancking bending spirally for hooping for col hooking ends and binding with and including mile steel wire non less than 0.9 mm dia securing with clips in quality complete all as specifed and directed.
All as per item No 44.00 here-in-before but 6mm to 8mm dia quality confirming complete all as spd and directed.
S&F Cast iron work grade FG 150, unmachined in bracket, over head tank covers with brackets ,gully traps, grating, railing,frames,manhole covers,fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters exc 5kg each and similar articles all as specified and directed.
M&L for providing factory made RCC precast cement concrete grade M-30 cover slab of size 450mmx900mmx75mm thick size set in cement mortar 1:6 including reinforcement of 8mm dia deformed bars @150mm c/c both ways etc, complete all as specified and directed.
M&L for providing factory made RCC precast cement concrete grade M-30 cover slab of size 600mmx900mmx75mm thick size set in cement mortar 1:6 including reinforcement of 8mm dia deformed bars @150mm c/c both ways etc, complete all as specified and directed.
S & F Mild steel work of framed brackets of Angles and ladder of watertanks and similar work flats cut to shape ,drilled and countersunk for screw, as in supports for stiffening of fencing, grating of open drain and including bending ,welding angles as necessary similar works confirming to Fe 290 or Gde-E165 and complete all as specifed and directed. .
M&L for preparation of new surfaces of steel, of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.
S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed.
S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S&F in 110 mm bore PVC (SWR) tee of any radius complete all as specified & directed.
S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed.
S&F PVC (SWR) junction, double equal or unequal 110mm dia fixed in repairs.
Dismantling floor, hearth or wall tiling incl cement mortar bedding but not backing complete all as specified.
M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed with white /coloured cement to match over 15mm thick screed bet of CM 1:6 complete all as specified and directed.
M&L glazed ceramic coloured tiles in vertical surfaces size 6 to 7 mm thick 300x200 set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed of CM 1:6 complete all as specified and directed.
S&Fin repair wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc complete all as specified and directed.
S&F in repair vitreous chine squatting pan Orissa pattern size 580x440mm white with 'P' or 'S' trap front or back inlet including footrest (excluding fluxing cistern and flush pipe) complete all as specified and directed.
S&F in repairs wash hand basin, vitreous china white of size 550x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets,32mm waste fitting and waste pipe of 32 mm bore, brass, chromium plated for glazed ware wash basin and 15mm dia pillar taps chromium plated fancy type etc complete all as specified and directed.
Supply and fix in repair 10 ltr, PVC, valveless, syphonic action type, flushing cistern, low level/ high level including inlet, ball valve, float and handle including brackets etc, complete all as specified and directed.
S&F in repairs CP angle cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair bib taps 15mm bore standard of PTMT any colour high pressure, screwed for iron pipe (min wt 90 gms) complete all as specified and directed.
S&F in repairs CP long nose bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed.
S/F in repairs brass Chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed 15mm bore fancy type.
S&Fin repair 15mm size PVC connection with PTMT nuts 450mm length.complete all as specified and directed.
S&F in repair low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls or laid in floors etc.
S&F in repairs chromium plated shower roses 125mm size with or without swivel joint including fixing to steel pipe or union etc.complete all as specified and directed. Make:Prayag polymers Pvt Ltd or equivalent
S&F in repair Aluminium anodized towel rail 20mm dia 'D' type 600mm long between flanges, with and including screws etc complete all as specified and directed.
Demolition of brick work or stone boulder masonry,built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles.complete all as specifed and directed
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.
All as per item No 73.00 here-in-before but except stones complete all as specified and directed. Note- Serviceable stones obtained vide item No 45 shall be reused after removing mortar and cleaning with water complete all as specifed and directed. .
M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specifed and directed
M/L for brick work with sub-class 'B' bricks, straight, or curved on plan to any radius as in half brick thick wall in CM 1:4 complete all as specifed and directed
Taking down cement or cement lime mortar plaster, any description on brick or stone walls etc, including rackingout joints, hacking for key, scrubbing down with water etc complete all as specifed and directed.
M/L for rendering 10 mm thick in CM 1:6 on brick walls surface finishing even and smooth (with out using extra cement)etc complete all as specified and directed by EIC.
Material and labour rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces finishes the surfaces even and smooth without extra cement coat including using water proofing compound 2% by weight of cement etc complete all as specified & directed. (Note :-Supply only water proofing compound will be measured and paid separately)
Supply only integral water proofing compound.
M&L for Extra over stone walling for hammer dressing to face stone and dressing face beds and joints as specified of random rubble walling uncoursed or brought upto courses surface n exc 20 mm complete all as specifed and directed
M&L for 20mm thick rendering in CM 1:4 on stone masonry surfaces finishing the surface even and smooth without using extra cement complete all as specifed and directed
M&L for applying three coats of white wash on wall including preparation of plastered or un-plastered surfaces of walls, complete all as specified and directed.
M&L for applying two coats of cement base paint on wall over a coat of priming paint including preparation of new plastered or un-plastered surfaces, complete all as specified and directed.
Demolition of concrete in ground floors (un reinforced) and paving n.exc. 15 cm thickness (below or above ground level) and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.
M&L for cement concrete type D-2 1:4:8 using 40 mm graded stone aggregate in filling foundation , sub base of floor and mass concrete complete all as specifed and directed
M&L for cement concrete type B-1, 1:2:4 ( 20mm graded aggregate) as in surface channels and drains etc complete all as specified
M&L for providing plain cement concrete 1:2:4 type B-1using 20mm graded stone aggregate as in kerb stone coping including framed work for man holes etc including weathering ,slightly rounded or chamfered angle and throating as directed including necessary form work complete all as specifed and directed
M&L 75 mm thick cement concrete type C-1, 1:3:6 (20 mm graded stone aggregate) as in plinth protection, path complete all as spd and directed.
M&L 100 mm thick cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as in hardstanding, path etc incl finishing cement concrete surface even and smooth without using extra cement complete all as spd and directed.
M&L PCC 1:4:8 C-2 (using 40mm graded crushed stone aggregate) as in sub base ( 75mm thick ) finished even and fair all as specified.
M& L for 80mm thick Machine pressed precast paver block M-40 grade laid over sand cushioning after consolidation set and levelled the paver block on proper level with inter locking and size conforming to IS 15658-2006 with grey cement and pigment (LAQUER FINISH) etc complete all as specified and as directed Note: sand cushion will be measured separetely .Make - Super tiles/NITCO Tiles/VITCO tiles
Supply only sand cusion for paver blocks
M&L for chequered cement concrete tiles 25cmX25cmX22mm thick,set jointed in neat cement slurry in floors with grey cement and pigments and including over 20mm thick screed bed in CM 1:4 etc and as approved by EIC
Cutting to existing manhole dia of pipe in 100 mm for connectingn new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as spd and directed.
All as per item No 95.00 here-in-before but 150mm dia of pipe
All as per item No 95.00 here-in-before but 200mm dia of pipe
All as per item No 95.00 here-in-before but 300mm dia of pipe
Super Construction
Maruti Construction Co.
S K ENTERPRISES
Rise and Rise Developers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .