Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.5 LAccepted-Finance | L1 | Accepted-Finance lowest | |
| 2 | L2₹21.5 L+₹1 L (4.88%)Rejected-Finance 37 B PHASE 3 INDUSTRIAL ESTATE GANGYAL JAMMU | L2 | Rejected-Finance not lowest | |
| 3 | L3₹23.5 L+₹3 L (14.6%)Rejected-Finance | L3 | Rejected-Finance not lowest | |
| 4 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | M/S K S ENGG WORKS L2 | VK Mechanical Works L3 | M/S A D INDUSTRIES L1 |
|---|---|---|---|---|---|---|
| 1.00Providing /replacement, testing , commissioning VT pump set of 05 cusec x 35 meter along with its allied works at LIS Katal Batal. | ||||||
| 1.01 | A) Design, providing, installation, testing and commissioning of 5 cusec discharge x 35 mtrs head VT pump set along with compatible slow speed prime mover having suitable lubricating arrangement and conforming to IS 1710 with latest arrangement after dismantling, extracting the old pump of unit III. The pump shall be capable of delivering the 05 cusec discharge against the lift of 35 mtrs head. The pump shall be suitable for satisfactory performance in every respect as per site conditions and the characteristic curves shall remain stable under all conditions under requisite discharge and climatic conditions having material of construction as detailed below:-
i Impellers : Stainless steel(AISI-410) the tenderers shall conform that the material of the impeller specified above shall be suitable in every respect for type, duty and quality of raw water
ii Line shaft/ line shafts sleeves : Stainless steel (AISI-410)
iii Pump shaft/ impeller shaft : Stainless steel (AISI-410)
iv Bowl and Bell mouth : Nickel cast iron having 1.5 to 2% nickel at tensile stress of 18kg/cm2 and specific gravity of 7.8 as per IS 210
v Column pipes complete as per site condition. : Steel as per IS: 210 of 1978/Grade A of IS:2062 1984 with latest amendments and IS: 4270
vi Wearing ring : Stainless steel (AISI-410)
vii Nuts and Bolts : High tensile steel
viii Stuffing box : Steel as per IS: 210 of 1978/Grade A of IS:730 of 1982 with latest amendments
ix Line shaft coupling : Steel as perIS1030 of 1982 with latest amendment
x Other component : Conforming to IS 1710 with latest amendments for such duty, head variations and quality of raw water
Vertical wet pit turbine or mixed flow pumps for above ground level discharge having suitable lubricating arrangement and conforming to IS 1710 with latest amendments. The pump shall be provided with non reverse ratchet mechanism. The ratchet shall be either ball or pin type and should have adequate strength to prevent the reverse rotation of the pump due to the back flow of water when the pump is shutdown. The pumps shall have suitable priming system for smooth operation. Suitable air release valves as per requirement in the discharge elbow shall be provided to release the air entrapped in the pump elbow and column pipe to prevent any overloading of the motor due to shut off caused.
OTHER PARAMETERS FOR SELECTION OF SUITABLE PUMPS/MOTORS :-
Capacity of pump – 5 Cusec
Total Head – 35 meters
Maximum Pump speed –1500 RPM
Column Length – suitable for 11.5 meter sump depth
Dia of Column Pipe – As per design of pump
Dia of bell mouth – not more than 3 00 mm
Make of pump: Any standard make conforming to IS 1710
Specification of motor;-
Voltage – 415+/- 10% 3 phase AC
Frequency – 50Hz +/- 5%
Insulation – class F
Duty – S1- continuous
Ambient temperature – 0-500 C
Make of motor: Any standard make
Capacity of motor: As compatible to the discharge of the pump
The job includes unloading the material by using heavy duty crane, skilled labour and stacking it near road side. Carriage of material inside the pump room by head load using skilled labour, tools and tackles. Fabrication and fitting of MS base plate of 32”x32” sizes of 20-25mm thickness on the existing foundation girder having provision for mounting the pump and motor on them to counter any vibrations of pumping units after checking proper levelling at LIS KatalBatal.
Lowering of new pump set by way of lowering pump assembly with line shaft, column pipes and spider sets. Connecting the column pipes by using superior quality fasteners/flanging and line shaft with requisite socket. Lowering all the column pipes with allied material including sleeves. Fitting of the top shaft, fitting of discharge head and connecting it to the existing delivery line by P/F of requisite nuts, bolts, gasket joints, flanges and reducer if required.
Complete job. includes cost of material including rebate on old scrap excluding pump and motor, consumable, handling, loading, unloading, transportation charge, labour charges for both skilled /semi-skilled labour and hiring charges for Crane, tripod stand, tools and tackles required during the execution of the job at site and shifting of extracted old pumping machinery to divisional store MID or any other suitable store as directed by executive engineer at Jammu | 1 | Job | 21,50,000 ₹21,50,000 | 23,50,000 ₹23,50,000 | 20,50,000 ₹20,50,000 Lowest |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
6 Jan 2026, 12:00 pmClosed
XEN MID JAMMU
MID JAMMU
Providing /replacement, testing , commissioning VT pump set of 05 cusec x 35 meter along with its allied works at LIS Katal Batal.
2025_IFC_299199_1
MID/J/e-NIT/2025-26/137
Open Tender
Machineries/ Mechanical Engg Items
Item Wise
80 days
KATAL BATAL
As per tender notice, SBD, BOQ
9 documents required · 9 mandatory
₹1,500
Executive Engineer MID JAMMU
₹50,000
MID JAMMU
27 Jan 2026
26 Dec 2025
6 Jan 2026
26 Dec 2025
6 Jan 2026
26 Dec 2025
29 Dec 2025
Select, Excess (+), Less (-)
Tender Inviting Authority: Executive Engineer, Mechanical Irrigation Division, Jammu
Title of Work:- Providing /replacement, testing , commissioning VT pump set of 05 cusec x 35 meter along with its allied works at LIS Katal Batal.
e-NIT No. MID/J/e-NIT/2025-26/137Dated: 26/12/2025
Name of the Bidder/ Bidding Firm / Company :
Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder in Rs. P Excise Duty in Rs. P GST in Rs. P Freight Charges ( Unloading & Stacking) in Rs. P Any Other Taxes/Duties/Levies in Rs. P Other Taxes 2 in Rs. P IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax in Rs. P Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category in Rs. P TOTAL AMOUNT Without Taxes in Rs. P TOTAL AMOUNT With Taxes in Rs. P TOTAL AMOUNT In Words
1 Providing /replacement, testing , commissioning VT pump set of 05 cusec x 35 meter along with its allied works at LIS Katal Batal. 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos
Quoted Rate in Words
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.27 MB
SBDD137.pdf
Additional Documents • 0.38 MB
BOQ_970571.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .