Drilling and Commissioning 01 no. bore well size 200/300mm and 250m deep including pump sets, pipes, panel etc. and construction of a pump room at sidhu-kanhu school Lalmatia, under Rajmahal Area.

Amount

Item Description/ Heading

labour for boring through any type soil for sinking tubewell 0.0 m to 50.0 m depth in with casing pipe to lowered:0.0m to 50.0 m

labour for boring through any type soil for sinking tubewell 0.0 m to 50.0 m depth in with casing pipe to lowered:50.0 m to 100.0 m

labour for boring through any type soil for sinking tubewell 0.0 m to 50.0 m depth in with casing pipe to lowered:100.0 mm to 150.0 m

labour for boring through any type soil for sinking tubewell 0.0 m to 50.0 m depth in with casing pipe to lowered150.0 m to 200.0 m

labour for boring through any type soil for sinking tubewell 0.0 m to 50.0 m depth in with casing pipe to lowered:200.0 m to 250.0 m

supplying and lowering of requires dia pipe of M.S 200 mm dia

supplying and installation lovents and casing of tubewell with submersible pump 7.50 HP

Supplying and fitting G.I pipe cap

Washing and developing tubewell with air compressor pump

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc:- 50 mm nominal outer dia pipes

Supplying , fitting and fixing G.I pipes of TATA make with all necessary accessories, specials viz. soccket, bend , tee, union, cross elbo, nipply, longscrew, reducing socket, reducing tee, shot piece etc. fitted with holder bates clamps, Including cutting pipes, making threads, fittings, fixing ttc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above groun (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(A) For Exposed work 50 mm dia. Medum quality.

Supplying , fitting and fixing G.I pipes of TATA make with all necessary accessories, specials viz. soccket, bend , tee, union, cross elbo, nipply, longscrew, reducing socket, reducing tee, shot piece etc. fitted with holder bates clamps, Including cutting pipes, making threads, fittings, fixing ttc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above groun (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(A) For Exposed work (a)(i)15mm dia. light quality.

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Centring and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12mm thick.

Centring and shuttering including strutting, propping etc. and removal of form for : Weather shade, Chajjas, corbels etc., including edges

Centring and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate.

12 mm cement plaster of mix : 1:6 (1 cement : 6 fine sand)

6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)

Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing with lime

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Brick flat soling with clamp burnt bricks in foundation and plinth ,joints filled in with sand as per specification and direction of E/I

First class kiln burnt brick works in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with clamped brikcs in superstructure above plinth level upto five level in cement mortar 1:6(1 cement:6 coarse sand

Total impact of GST for the purpose of CTC

M/S Sudam Thakur

M/s Shakil Ansari