SPECIAL REPAIRS OF BLDG NO 211 (SINGLE OR LIVING) ACCN AND SPECIAL REPAIR TO BLDG NO P-125 (OR MD ACCN) AT KALIMPONG MIL STN UNDER GE 867 EWS

Amount

Dismantling asbestos cement (corrugated, semi corrugated etc.) sheets in roof covering including AC ridge complete all as specified and as directed.

S&F pre-painted aluminium zinc corrugated/ semi corrugated/ tile pattern or any other profile as directed, steel sheet (galvalume base) of thickness 0.5mm, in colour having tensile strength of 550 Mpa as in roof covering/Cladding to wall and profile as approved by GE and to be factory moulded and fixed with hot dipped galvanised (not less than 150 gm/sqm) with high durable protective triple coated self tapping screws/self drilling screws, to suit the roofing in customized colour matching with the colour of roof covering / cladding to wall and screws are to be fixed using torque adjustable electronic gun screws driller of suitable capacity complete all as specified and as directed.

S&F pre painted galvalume aluminium zinc coating (zinc coating not less than 150 gm/Sqm) GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary length) ,conforming to Fe-410-W Gde E-250 quality A complete all as specified and as directed

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets and removing materials from site of work complete all as specified and as directed.

Dismantling of old decayed timber scantling 40 Sq cm and over in section in any position framed work including removing of dismantled material from work site all as specified and as directed.

Dismantling of old decayed timber fillets under 40 Sq cm in section, unframed work as in fillets, rail, posts, rafters,purlins etc including removing of dismantled material from work site all as directed.

S&F GI frame work for seamless false ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n.exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre size of grid of GI frame 605 x 605mm to receive E-board ceiling complete all as specified and as directed

Taking down cement plaster on brick wall/ stone wall/ concrete surfaces including racking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M & L rendering 15mm thick on brick/ stone masonry surfaces or surfaces other than fair faces of brickwork/ stone masonry in cement mortar 1:6 finished even and fair (without using extra cement) complete all as specified and as directed.

M & L rendering 10mm thick on stone masonry surfaces or surfaces other than fair faces of brickwork in cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 in two layer of 10mm thick rendering coat and 5mm thick setting coat in cement mortar (1:4) on external wall finished even and fair mixed with ISI marked liquid water proofing compound (external (2nd) layer of plaster shall be mixed with ISI marked liquid water proofing compound) in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note : WPC will be measured and paid separately as supply only.

Supply only water proofing compound conforming to IS-2645-2003 complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness below or above ground level including removal of demolished materials from work site complete all as specified and as directed

M&L precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landing, cover slab etc. including necessary formwork set in CM 1:4 complete all as specified and as directed (Note:- Reinforcement shall be measured and paid separately under the relevant item)

M & L reinforced cement concrete (nominal mix) type A-1 (1:11/2:3) (using 20mm graded stone aggregate) as in chajjas and the like complete all as specified and as directed.

M&L TMT bars 10mm dia and over, as reinforcement. cut to length, bent to shape required including crancking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

M&L TMT bars 6 to 8mm dia, as reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

Use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces complete all as specified and as directed.

M&L for two coats of oil bound distemper over a coat of priming coat on newly prepared wall surfaces, including 2 mm thick layer of wall care putty including preparation of surfaces complete all as specified and as directed.

M&L for scrapping of existing surface for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of priming coat on newly prepared wall surfaces, including 2 mm thick layer of wall care putty including preparation of surfaces complete all as specified and as directed.

M&L preparing new plastered or unplastered surfaces of wall and applying three coats of white wash on wall complete all as specified and as directed.

M&L preparing old plastered or unplastered surfaces of wall and applying one coat of white wash on wall complete all as specified and as directed.

M&L preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L preparing old plastered or unplastered surfaces of ceiling and applying one coat of white wash on ceiling complete all as specified and as directed.

M&L for applying two coats of weather shield exterior emulsion paint (Apex) over a coat of alkali resistant primer including preparation of wall surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment of wall (old surfaces) and preparation of wall surfaces, soffits of chajjas etc. by brooming down or steel wire brush and applying two coats of weather shield exterior emulsion paint (Apex) over a coat of alkali resistant primer complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in roof, floor (other than ground floors, beams staircases, landing, chajjas and similar suspended work not exc 15 cm thickness complete all as specified and as directed.

Dismantling of old floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and as directed.

M&L for Matt Finish ceramic coloured tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L 300 x 200 x 7 mm thick coloured glazed ceramic designer tiles (in two or more combination) fixed as in vertical surface such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick screed bed or bedding layer in CM 1:3 finished even and rough complete all as specified and directed.

M&L for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete over and including 20 mm thick screed bed or bedding layer in CM 1:6 finished even and rough all as specified and directed.

M&L for machine cut Kota stone slab as in vertical surfaces such as dado/skirting, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete over and including 10 mm thick screed bed or bedding layer in CM 1:4 finished even and rough all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floors laid in panels and finishing top surfaces of cement concrete even and smooth without using extra cement including fixing only glass dividing strips to divide the area in panels and inserted in position to conform to design complete all as specified and directed.

S&F glass dividing strip, 38mm wide, 3mm thick, fixed on floor for panels complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5 sqm each and removing to store yard complete all as specified and as directed.

Taking down chowkats or frame with shutter, (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4 sqm each and removing to store yard complete all as specified and as directed.

S&F factory made solid core PVC door frame of size 50mmx47mm made out of 5mm thick plain colour single side prelam PVC sheet reinforced with MS square tube as per specification and drawing given on Clause No. 8B.3 of MES Schedule Part-II (2010) complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame, welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement as per specifications and drawings given on MES Schedule Part-II (2010) complete all as specified and directed.

S & F 125 mm x 60 mm x 1.25 mm thick pressed steel frames for doors conforming to IS-4351 with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

M&L 35mm thick well seasoned second class hardwood plain framed panelled shutter (any number of panel) with panels of timber flat on both sides (feather edge) or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkhats complete all as specified and as directed.

S&F 35mm thick 2nd class hardwood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Sec 8, Clause 8.24(a) supplied and fitted to chowkhats complete all as specified and as directed.

S&F factory made steel windows confirming to IS 1038-1983 with side hung shutters including projecting type hinges with steel handle and steel peg stay, guard bar etc complete with glazing bars dovetailed or welded complete all as specified and as directed.

All as per Srl item No 44.00 here-in-above but without glazing bars.

S&F factory made steel windows confirming to IS 1038-1983 with side hung shutters including box type hinges with steel handle and steel peg stay, guard bar etc complete with glazing bars dovetailed or welded complete all as specified and as directed.

All as per Srl item No 46.00 here-in-above but without glazing bars.

S&F factory made steel ventilators with top hung shutters conforming to IS-1038-1983 including hinges, with steel peg stay complete all as specified and as directed.

M & L for PCC 1:3:6 type C-1 (20mm graded stone aggregate) as in bed blocks for embedding hold fast of doors, coping, filling in pressed steel chowkats including necessary form work, complete all as specified and as directed.

S&F MS work as in hold fast, wall ties, hooks for hanging fans, bands, straps, supports or stay for rain water pipes, plain angle, cleats and similar small articles quality conforming to Fe-410-0 or Fe-310-0 with and including screws, bolts, nuts, washers all as required complete all as specified and directed.

S&F 100 mm size butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and as directed

S&F of 150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and as directed.

S&F of 150 mm long aluminium, anodised, handle, section and fixed all as specified and as directed.

M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of old wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking up or down old steel water tubing 15 mm bore and fittings etc and segregation serviceable pipe keep them stacking for reuse, making good disturbed surfaces of walls / ceilings and removing unserviceable pipe / materials from site of work complete all as directed.

M&L 15 mm bore steel water tubing medium grade ISI marked, galvanised including new fitting fixed complete to walls and ceiling or floor complete all as specified.

S&F in repairs of PVC low level flushing cistern, 10 Ltr capacity, syphonic action type white body with inlet ball valve, float, handle, bracket, flush pipe etc complete & connecting to WC complete all as specified and as directed.

S&F in repair vitreous china squatting pan “Orissa pattern” of size 580 x440mm white with integral foot rest 1st quality with 100mm dia ‘P’ or ‘S’ trap, ISI marked including provision of cement concrete bedding excluding flush pipe complete all as specified and as directed.

S & F in repair vitreous china half stall Urinal (white) including fixing plug, discharge pipe, brackets, flush pipe etc, fixed to walls complete all as specified and as directed.

S&F in repair 15 mm bore bib taps chromium plated with wall flanges screwed down, screwed for iron pipe or brass ferrule etc, complete all as specified and as directed. (Cat Part No. CON-047KN of Jaquar or equivalent model of Marc/ Cera)

S&F in repair 15 mm bore stop cocks, angle cocks chromium plated reduce body, long shunk, cap (conceal type) screwed down, high pressure screwed both ends for iron pipe or for union etc complete all as specified and as directed.

S&F in repairs angle valve 15 mm bore, chromium plated, fancy type, with wall flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs of CP shower rose 125mm size approved quality complete all as specified and as directed.

S&F tubular towel rail 20mm dia, D type 600mm long between flanges of brass chromium plated fixed with and including CP brass screws complete all as specified and as directed.

S & F in repair wash hand basin vitreous china, flat back of size 550mmx 400mm 1st grade quality of approved brand with PVC waste pipe 32mm dia suitable length and waste fittings 32mm dia brass, chromium plated etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end including waste pipe complete all as specified and as directed. (Cat Part No. 0406 of Parryware or equivalent model of Hindware/ Cera)

S&F PVC connection 15 mm dia size with PTMT nuts of length 450 mm complete all as specified and as directed.

S & F in repairs 15mm bore pillar tap cast copper alloy 15mm bore with capstan head, chromium plated, screwed down high pressure, with or with out lettered "Hot" or "Cold" with long screw shank and fly nuts, screwed for iron pipes complete all as specified and as directed. (Cat Part No. CON-011KN of Jaquar or equivalent model of Marc/ Kohler/ Cera)

Demolition and breaking up old broken , PVC (SWR) , Cast Iron, AC, SWG soil waste and vent pipe of 100/110 mm bore including accessories set in cement mortar and removing rubbish from site as directed by Engineer-in-Charge complete all as specified and directed.

S&F of 110 mm PVC (SWR) drain pipe, type 'B', single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) junction single (Single T) equal or unequal jointing with solvent cement complete all as specified and directed.

S&F in repairs stainless steel 25 mm dia chromium plated curtain rod with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S & F SWG gully trap size 150 x 150 mm square or round mounted type ‘S’, setting and jointed with solvent cement complete all as specified.

S&F in repairs Soap dish, CP, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection/path laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges complete all as specified and directed.

S&F 4 mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

S&F of 300 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F 7mm thick PVC insulation panel with EPS stuck to 1.0 mm thick plain PVC sheet any colour suitably placed in existing/ new false ceiling grid made of Aluminium/ MS/ GI/ wooden and hanging the section with GI wire with purlin and rafter etc complete all as specified and as directed. (Note : New false ceiling grid of aluminium/ GI/ MS/ wooden if provided shall be measured and paid separately)

Demolition of cement concrete (unreinforced) above ground floor exc 15cm thickness including removal of demolished materials from work site complete all as specified and as directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floors and finishing top surfaces of cement concrete even and smooth using extra cement complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement etc including forms, moulds , mitred / stopped ends complete all as specified and as directed.

M & L rendering 10mm thick on concrete surfaces as in ceiling/ chajja and reinforced cement concrete surfaces in cement mortar 1:3 finished even and smooth (without using extra cement) complete all as specified and as directed.

S & F 105 mm x 60 mm x 1.25 mm thick pressed steel frames for doors conforming to IS-4351 with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F 2nd class hard wood (well seasoned) plain, solid, straight, chowkats and frame,wrought,framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 30mm thick 2nd class hardwood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Sec 8, Clause 8.24(a) supplied and fitted to chowkhats complete all as specified and as directed.

S & F for second class hard wood small fittings such as door stopper, brackets of any type, including all necessary labours complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

S&F of 200 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and as directed.

S&F of 250 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 75 mm size butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and as directed

S&F of 100 mm long aluminium, anodised, handle, section and fixed all as specified and as directed.

M&L 18-19 mm thick block board, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work complete all as specified and as directed.

S&F Hasp and staple aluminium anodised 100mm safety type with mild steel hinge pin including bolt to hinge plate and fixed with screw complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.5 sqm complete all as specified and as directed.

M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete over and including 20 mm thick screed bed or bedding layer in CM 1:6 finished even and rough all as specified and directed.

S&F PVC connection 15 mm dia size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repair push tap any colour of PTMT screwed for iron pipe of 15 mm size and fixed (Minimum weight 47 gms) complete all as specified and as directed.

Dismantling and breaking up old drain pipes 75/100mm of dia jointed in cement mortar including taking out and removing materials from work site complete all as specified and as directed.

S&F of 75 mm PVC (SWR) drain pipe, type 'B', single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed.

S & F 75mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed.

S & F PVC (SWR) gully trap 125/110mm square or round mouthed type 'S' setting and jointing with solvent cement complete all as specified and as directed.

S & F Vitreous china wash basin, white, Corner fitted, size (45x39)cm including waste pipe ,chain and plug and porcelain stopper and brackets complete all as specified and as directed. (Cat Part No. 10031 of Hindware or equivalent model of Parryware/ Cera)

S & F 15mm bore pillar tap cast copper alloy 15mm bore with capstan head, chromium plated, screwed down high pressure, with or with out lettered "Hot" or "Cold" with long screw shank and fly nuts, screwed for iron pipes complete all as specified and as directed. (Cat Part No. CON-011KN of Jaquar or equivalent model of Marc/ Kohler/ Cera)

S&F in repairs of 1mm thick stainless steel sink without drainage board kitchen or laboratory type with waste pipe, plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size of sink 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with 60cm long fixed with chromium plated bracket guard complete all as specified and as directed.

Excavation in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for taking out pipeline, HT underground cable/ pole foundation and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated materials to a distance not exceeding 50 metre away and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed

Taking up or down old steel water tubing of 40mm bore and fittings etc and making good disturbed surfaces of walls/ceilings etc and segregation serviceable pipe, keep them stacking for re-use and removing unserviceable pipe from site of work complete all as specified and as directed.

All as per Srl item No 119.00 here-in-before but for 25 mm bore complete all as specified and as directed.

All as per Srl item No 119.00 here-in-before but for 20 mm bore complete all as specified and as directed.

Refixing / relaying old steel tubing 40 mm bore in new or old positions including provision of new GI fittings complete all as specified and as directed. (Note:- (i) Serviceable GI tube obtained from srl item No. 119.00 shall be used. (ii) The cost of new fittings shall be included in unit rate. (iii) Excavation and earth work if necessary for work under trenches in new position shall be measured and paid separately.)

Refixing / relaying old steel tubing 25 mm bore in new or old positions including provision of new GI fittings complete all as specified and as directed. (Note:- (i) Serviceable GI tube obtained from srl item No. 120.00 shall be used. (ii) The cost of new fittings shall be included in unit rate. (iii) Excavation and earth work if necessary for work under trenches in new position shall be measured and paid separately.)

Refixing / relaying old steel tubing 20 mm bore in new or old positions including provision of new GI fittings complete all as specified and as directed. (Note:- (i) Serviceable GI tube obtained from srl item No. 121.00 shall be used. (ii) The cost of new fittings shall be included in unit rate. (iii) Excavation and earth work if necessary for work under trenches in new position shall be measured and paid separately.)

S&F steel water tubing 40 mm bore medium grade conforming to IS:1239 laid in trenches including necessary all fittings complete all as specified and as directed.

S&F steel water tubing 25 mm bore medium grade conforming to IS:1239 laid in trenches including necessary all fittings complete all as specified and as directed.

S&F steel water tubing 20 mm bore medium grade conforming to IS:1239 laid in trenches including necessary all fittings complete all as specified and as directed.

S & F in repair rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) Conforming to IS 12701-1996 three layered hoisted and fixed in position 2000 ltrs capacity complete all as specified in SSR Part I including taking down old water tank complete all as specified and as directed.

S&F ball brass valve high pressure conforming to IS-1703 with polythene float and flynut complete screwed for 25mm dia iron pipe or brass ferrule and fixed complete all as directed.

S&F in repair gun metal gate valves of size 40mm dia with iron wheel head, screwed both ends for iron pipe, ISI Marked, as per IS: 778- 1984 complete all as specified and as directed.

All as per Srl item No. 130.00 here-in-before but for 20 mm bore complete all as specified and as directed.

All as per Srl item No. 130.00 here-in-before but for 25 mm bore complete all as specified and as directed.

M&L for compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channels sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. conforming to Fe-410W (Gde-E-250) quality-A and painting with two coats of black bituminous paint over a coat of red oxide primer complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drain including necessary formwork complete all as specified and as directed.

S & F in repair rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) Conforming to IS 12701-1996 three layered hoisted and fixed in position 750 ltrs capacity complete all as specified in SSR Part I including taking down old water tank complete all as specified and as directed.

Supply and laying dry fine sand cushioning to under ground cable provided with a layer of 23 cm thick (8 cm before laying and 15 cm thick after laying of cable) complete all as specified and as directed. (Note : punned thickness shall be measured)

Supply and laying reinforced precast concrete cable cover, class LV, type-1, flat size (250x150x40)mm for protection of cable complete all as specified and as directed.

Dismantling / Taking out Unserviceable service cables of size upto 35 sqmm from any position i.e. ground / walls / poles / roofs including GI service bracket etc complete with protection pipe all as specified and as directed.

Supply, laying, connecting and testing in trenches, under floors/roads or on walls cable XLPE insulated screened PVC bedded galvanized steel strip armoured with stranded earth system electric power cable (heavy duty) with aluminium conductor 1100 Volts grade cross sectional area of size 25 Sqmm 2 Core conforming to IS : 7098 (Pt-I)-1988 complete all as specified and as directed.

M & L GI tube light grade for passing through cables under the floor, along the wall or along the pole of 40 mm bore and fixed to the poles/walls with suitable size of MS clamps and nut and bolts/washers etc including taking down old GI tubing complete all as specified and as directed.

Taking down carefully copper/ aluminium point wiring (light, fan socket or power) complete, including fixture and fittings such as switches, ceiling roses, Pendants, regulators, sockets, light fittings etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good the disturbed portion/ surface of wall/ floor/ ceiling etc by using cement mortar and colour/ white wash to match with the existing surface/location complete all as specified and as directed.

Disconnecting and taking down distribution boards, switch fuse unit, enclosure for MCB of any type and size complete all as specified and as directed.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping not less than 20mm size, medium grade with all necessary fittings, surface wiring , for light / E/fan/Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes (concealed type in permanent bldg and surface in temporary bldg or as directed) for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.

All as per item No. 143.00 here-in above but for one 3/5 Pin switch socket outlet 5 amp on independent board complete all as specified and as directed.

All as per item No 143.00 here-in above but for one 3/5 Pin switch socket outlet 5 amp on same board with other switch with cable 1.5 Sqmm size complete all as specified and as directed.

All as per item No 143.00 here-in above but for one switch socket outlet 15 Amp on independent board with multistranded copper conductor cable 2.5 Sq mm size single core, including one No. 2.5 Sq mm stranded single core PVC insulated unsheathed copper cable (FRLS) as for continuous earth wire complete all as specified and as directed.

S & F Switch Piano flush button single pole one way 5 Amp, 240 volt , complete all as specified

S&F ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.

S &F switch socket combination 2 in 1, 3/5 pin, 5 Amp flush type complete all as specified and as directed.

S &F switch socket combination 2 in 1, 6 pin, 5 & 15 Amp flush type universal complete all as specified and as directed.

S & F, IP 20, Class I, LED light fitting 1 x 18 W (4 FT), CRI >= 80, CT >=5700 K, wall / surface mounted, integrated type, constructed of fire retardant engineering grade extruded plastic & decorative end caps with integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with suitable fixing arrangement complete including 01 No 18 W (4 FT) LED lamp with PC body or strip LEDs all as per OEM with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size all as specified and as directed. (Cat Part No. TMC 501 P 1XT-LED 22W P3241 (Batten) and MAS LED tube 18W, 865 T8 I - 1800lm (LED tube) of Make PHILIPS or equivalent model of Havells/ Surya/ Bajaj or as approved by GE)

S&F LED bulk head fitting, 10 watt, compact, ultra low energy, modern design utility bulkhead suitable for indoor and outdoor applications with IP 66 protection complete and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 V, 50 HZ and mounting on PVC rectangular board of 200mm x 250mm including dismantling unserviceable light fittings complete all as specified and directed. (Cat Part No. WT 202W LED 10S CW PSU S3 PC of Make Philips or equivalent model of Havells/ Surya/ Bajaj or as approved by GE)

S & F lamp holder, PVC/polycarbonate type with back plate suitable for LED lamp and including LED lamp retrofit 5 watt complete all as specified and as directed.

S&F sheet metal enclosure factory fabricated for MCB distribution board SPN 240 Volt 12 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified and as directed. (Cat Part No. 5076 12 of Legrand or equivalent model of Hager/ Siemens/ ABB or as approved by GE)

S & F MCB, SPN, 10KA, 240V, "C" curve, 40 Amp, ISI marked complete all as specified and directed. (Cat Part No. 4086 18 of Legrand or equivalent model of Hager/ Siemens/ ABB or as approved by GE)

S & F MCB, SP, 10KA, 230V, "C" curve, 06-32 Amp, ISI marked complete all as specified and directed. (Cat Part No. 4085 87 to 4085 95 of Legrand or equivalent model of Hager/ Siemens/ ABB or as approved by GE)

S&F in repair sub main wiring power/circuit using FRLS PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through and including PVC conduit 25mm dia medium Grade concealed in walls/roof/floors complete all as specified and as directed. (Note : (i) Three single core wires of 6 Sqmm and one run of PVC conduit shall be measured as one unit)

Taking down and Opening of exhaust fan (any type, make & sweep) at location of installation for servicing work such as complete painting, cleaning of fan blade and greasing of bearing with approved quality of grease, cleaning of bushes and oiling etc wherever required including checking of serviceability of condenser ball bearing and bushes etc including testing and refixing in same position complete all as specified and as directed. (Note : Spare parts and flexible cable shall be measured and paid separately.)

Supply only 3 core PVC insulated overall PVC sheathed stranded copper conductor cable 0.5 sq mm sizes complete all as specified and as directed.

Supply only ball bearings No 6203 suitable for fan of existing make type & sweep complete all as specified and as directed. (Make : NBC/ SKF/ TATA or as approved by GE)

Supply only 2.5 MFD capacitor suitable for exhaust fan of existing type & sweep complete all as specified and as directed.

S & F energy saving & environment friendly long life 25 W, CT >=5700 K, LED building security light made up of pressure die-cast aluminium housing with acrylic cover as diffuser with IP 66 protection & impact resistance not less than IK-07 complete with integrated type, with high efficiency electronic driver, surge suppressor of 5 KV or more & high brightness LEDs, luminaire efficacy > 110 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz complete incl bracket made out of 40 mm dia light grade GI pipe duly fixed with MS clamps nut, bolts etc including connecting up with and including three core twisted flexible copper conductor cable of suitable size all as specified & as directed. (Cat Part No. ENDURAPEARLSL25WLED757SASYTOPC of Make Havells or equivalent model of Philips/ Surya/ Bajaj or as approved by GE)

Taking down kWH meter and keeping aside for refixing and refixing the same including all electric connections complete all as specified and as directed.

Earthing in repairs complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I and as directed.

S &F call bell single pole ding dong AC 230 volt complete all as specified and as directed.

S&F Bell push flush type 5 Amp complete all as specified and as directed.

S & F MCB, SPN, 10KA, 240V, "C" curve, 32 Amp, ISI marked complete all as specified and directed. (Cat Part No. 4086 17 of Legrand or equivalent model of Hager/ Siemens/ ABB or as approved by GE)

S&F in repair sub main wiring power/circuit using FRLS PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVC conduit 25mm dia medium Grade concealed in walls/roof/floors complete all as specified and as directed. (Note : (i) Three single core wires of 4 Sqmm and one run of PVC conduit shall be measured as one unit)

S&F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 V complete all as specified and as directed. (Cat No. 5078 11 of make Legrand or equivalent model of Hager/ABB/SIEMENS or as approved by GE)

Taking down and refixing of tubelight/ wall fittings of any type, make and size in same position after carrying out minor repair complete all as specified and as directed.

Taking down water storage heater (Geyser) and keep in safe custody and refixing the same including necessary electric/water connection grouting of MS fastener of suitable size complete all as specified and as directed.

S&F decorative wall mounting fixture, made up of Polycarbonate body suitable for 10 watt LED lamp (B-22 base) complete all as specified and as directed. (Cat Part No. LHDL06160099 of Make Havells or equivalent model of Philips/ Surya/ Bajaj or as approved by GE)

S&F sheet metal enclosure factory fabricated for MCB distribution board TPN 415 Volt 4 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified and as directed. (Cat Part No. 5076 70 of Legrand or equivalent model of Hager/ Siemens/ ABB or as approved by GE)

S & F MCB, TPN, 10KA, 415V, "C" curve, 63 Amp, ISI marked complete all as specified and directed. (Cat Part No. 4086 83 of Legrand or equivalent model of Hager/ Siemens/ ABB or as approved by GE)

S&F sheet metal enclosure factory fabricated for MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified and as directed. (Cat Part No. 5076 11 of Legrand or equivalent model of Hager/ Siemens/ ABB or as approved by GE)

Note:- The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount.

C. M. AGARWAL AND CO

HEM RAJ GURUNG

MOURICE CONSTRUCTION COMPANY

MS BRAHMA CONSTRUCTION

MS MAYA PRAKASH GOEL AND SONS

RAMESH GURUNG