Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAccepted-AOC | L1 | Accepted-AOC lowest bid quoted | |
| 2 | L2₹33.6 L+₹2.1 L (6.67%)Rejected-Finance H NO 90 VILLAGE REWLA KHANPUR PO NAJAFGARH NEW DELHI 110043 | NEW DELHI | WEST DELHI | DELHI | 110043 | L2 | Rejected-Finance highest bid quoted | |
| 3 | L3₹35.0 L+₹3.4 L (10.9%)Rejected-Finance | L3 | Rejected-Finance highest bid quoted | |
| 4 | L4₹35.9 L+₹4.3 L (13.7%)Rejected-Finance H NO 1366 3 GALI NO 6 MATA ROAD NEAR HAPPY MODEL SCHOOL RAJIV NAGAR GURGAON 122 001 HARYANA | GURGAON | GURGAON | HARYANA | 122001 | L4 | Rejected-Finance highest bid quoted | |
| 5 | L5₹35.9 L+₹4.3 L (13.8%)Rejected-Finance A 47D RAM DUTT ENCLAVE UTTAM NAGAR NEW DELHI 110059 | WEST | DELHI | 110059 | L5 | Rejected-Finance highest bid quoted |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
22 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Gurgaon
Gurgaon
ADDN ALTN TO SMQs 78 TO 89 TWELVE QTRS AT AF STATION ARJANAGRH UNDER GE AF GURGAON
2022_MES_530526_1
CA NO GE/GUR-/NIT-17/2022-23
Open Tender
Miscellaneous Works
Piece-work
240 days
GE (AF) Gurgaon
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) Gurgaon
₹88,000
23 Aug 2022
13 Jun 2022
25 Jul 2022
13 Jun 2022
22 Jul 2022
27 Jun 2022
Amount
Taking down cement or cement lime plaster on stone/brick wall, ceiling incl raking out joints, hacking for key, scrubbing down with water etc, including removal of rubbish outside MoD land and necessary scafolding upto 4th mtr. complete all as specified and directed.
M&L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and even and using WPC, complete all as specified and directed (Note : WPC shall be measured and paid separately.
M&L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified.
M&L for Rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified.
Taking down chowkats or frames with shutters (with out taking off shutters from the frame) not exceeding 1.50 Sqm each all as specified and directed by Engineer - in – Charge.
Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and all as specified and directed by Engineer - in - Charge.
M&L for Mild steel framed work such as in doors/chowkhats or gates of angle or other section with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening & fixing and similar work conforming to Fe-290 grade E-165 complete all as specified, making good disturbed portion to match existing surface complete in all respect as specified.
S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.20 (a) ; supplied and fitted to chowkats all as specified and directed by Engineer - in - Charge
S & F flush shutter 30 mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match all as specified and directed by Engineer - in - Charge.
M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded coloured PVC ’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of single side prelaminated PVC sheet to be fitted in the MS frame welded/ sealed into the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification complete all as specified and as directed by Engineer-in-Charge.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet & reinforced with MS square tube and fixing in opening as specification & drawing, complete all as specified and directed.
S&F mild steel plain black sheet 0.80 mm thick as in hearths,covering to door shutters , covering to door chowkat etc cut to size edges beaded if directed, holes punched, etc complete all specified and as directed.
S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long all as specified and directed by Engineer - in – Charge .
S & F mild steel sliding door, bolts, plate type, stove enamelled black with bright bolt not less than 12mm bore, length of bolt 250mm all as specified and directed by Engineer - in - Charge .
S&F 300mm Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
S & F aluminium handle cast type anodised, 125 mm long all as specified and directed by Engineer - in - Charge .
S & F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150mm long complete all as specified and directed.
S & F Mild Steel butt hinges, medium weight 100mm size all as specified and directed by Engineer - in - Charge .
S & F stainless Steel butt hinges, medium weight 100mm size all as specified and directed by Engineer - in - Charge .
M&L for factory made box type steel window with pintol hinges & 2 Nos100 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified
M&L for factory made box type steel window with pintol hinges & 2 Nos 100mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified
M&L for factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified
S&F framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks, grills to balconies fixed to RCC/ brick walls and similar work complete all as specified and as directed by the Engineer-in-Charge.
Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed
M&L for, Non-skid ceramic coloured tiles, 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified.
M&L for First quality, Non skid ceramic coloured, 8 to 10 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified.
M&L for First quality, Non skid ceramic coloured, 8 to 10 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, on vertical surface set and over including 10 mm thick rendering with cement mortar (1:3) including pointing in white cement with pigment to match the shade of tiles, complete all as specified.
M & L for first quality coloured glazed ceramic, fixed in pattern of different colour including border of size 300x450x7 mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. Note :- Pattern of the tiles will be decided by GE at the time of execution.
Dismantling/removing old damaged worn out APP of any thickness incl screed bed or plastering of any thickness and removing the rubish materials outside MOD land at a dumping place earmarked marked by any state govt/municipalities etc any distance complete.
M&L for 15 mm thick screed bed in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 150 ml by per bag of cement on concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.
Supply only Integral water proofing compound complete all as specified and directed
M&L for Cutting groove in brick wall 75 mm wide and 65 mm deep for inserting APP polymer membrane and shaping horizontal face of groove with cement mortar 1:3, including removal of rubbish outside MoD land, complete all as specified.
M&L for , water proofing treatment of roof consisting as under:- (a) Applying a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm over a coat of primer @ 0.30 litre/ sq.m including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions complete all as specified and directed.
All as per Srl item No. 33 above but on vertical surfaces, using hot blown bitumen having penetration value 30/40 applied 1.20 Kg/ Sq.m over primer @ 0.30 litre/ Sq.m, complete all as specified and directed by Engineer-in-Charge.
Supply and fixing, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.
S & F 3mm thick Sheet glass ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified.
S & F 3mm thick figured glass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified.
Supply and fixing, drapery rod of mild steel 25mm dia, ribbed/fancy type, PVC powder coated, any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall in repairs, with PVC finols/finnels, connected accessaries, rubber packing, required screws and PVC rawal plugs as required complete all as specified and as directed.
M&L for preparation of new surfaces of wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat pink primer complete all as directed.
M&L for preparation of new surfaces of steel or iron work of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of primer on steel surfaces complete all as specified and as directed by Engr-in-Charge.
M&L for Preparation of newly plastered surfaces of wall and applying two coat of Cement Base Paint of approved colour and shade by accepting officers over and including a coat of primer as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge including necessary scafolding upto 4th floor.
M&L for preparation of new plastered surfaces and apply two coat of oil bound distmper over a coat of primer, complete all as specified and directed.
M &L for preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified .
M & L for preparation for old plastered surfaces on walls and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation for old surfaces on wall and applying two coats of oil emulsion paint (white or tinted) over a coat of primer with chalk whiting on plastered surfaces complete as specified
M&L for preparation of old surfaces on ceiling including cornices pilasters steel scrappers , wire brushing, and efforescent salts and treating oil and greasy spots and applying two coat of white wash on ceilling complete all as specified and directed by Engineer-in-Charge.
Taking down steel tubing and connections including cleaning for refixing or removing to stores complete all as specified and directed by Engineer - in – Charge.
All as per Srl Item No 47 here in before but 20mm bore all as specified and directed by Engineer - in - Charge.
S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately.
S & F 20 mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately.
M&L for Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc; and cuttings chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth all as specified and directed by Engineer-in - Charge.
S & F in repairs chromium plated shower rose 125mm size incl shower arm casted 190 mm long flat shape for wall mounted showers with flange incl fixing to steel pipe or union all as specified and directed by Engineer - in - Charge.
S & F in repairs Ist quality vitreous china wash basin, white, flat back, size 550x400mm , PVC connections suitable for hot and cold water,bottle trap (with internal partition) 32 mm size with 300mm &190mm long wall connection pipes & wall flange, and fixing withbrackets/bolts including cutting and pinning in etc complete all as specified and directed by Engineer - in – Charge .
S&F pillar tap 15mm size cast copper alloy chromium plated fancy type screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipes.
Taking up/down AC soil ,waste and vent pipe 100mm bore size set in CM all as per specified and directed from walls complete all as specified and directed
S&F 110mm PVC (SWR) pipes single socketed in any length along with rubber ring joint fixed to walls with all accessories complete all as specified and directed.
S&F PVC bend any radius 110 mm bore complete all as specified and directed.
S&F in repairs vitreous china squating pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed.
S & F in repairs stainless steel sinks with drainage board made out of 1.00 mm thick sheet for kitchen with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm dia and making good to disturbed surfaces, fixed in repairs, complete all as specified.
Dismantling water tanks of capacity exceeding 250 and not exceeding 500 ltrs all as specified and directed by Engineer - in - Charge.
S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top, triple layered) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres all as specified and directed by Engineer - in - Charge .
S&F ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore dia iron pipe supplied and fixed in repairs complete all as specified and as directed by Engineer-in-charge.
S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.
S & F in repairs PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engineer - in – Charge.
S & F in repairs bib taps, long body cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified.
S&F in repairs 15mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as directed by Engr in Charge.
S&F in repairs 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as directed by Engr in Charge.
S & F in repairs angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified.
S & F in repairs stop valves, cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions complete all as specified.
Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar.
M&L for polished marble 18 to 20mm thick, green colour in approved shade to cooking platform in kitchen laid over 20 mm screed bed of cement mortar 1:6, rounded on edges, jointed and pointed in cement to match complete all as specified and as directed by the Engineer-in-Charge.
Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified.
M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm.
M&L for PCC (1:3:6) Type C-2 50 mm thick using 40 graded stone aggregate as in sub base of floor all as specified.
M&L for machine pressed precast concrete interlocking paver block wilth grey cement and no pigment of any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade over 25 mm thick sand cushioning, etc complete all as specified and directed.
M&L for PCC 1:2:4 Type B-1 (using 20mm stone crushed agg.) as in rounded or chamfered on edges in any description complete all as specified and as directed.
Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed.
M&L for Brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge .
M&L for brickwork with sub class `B' bricks (old size), straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge.
Supply & fixing block board 18/19 mm thick, grade 2 quality, interior grade, commercial type fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
S&F 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, fixed in repairs, complete all as specified.
S& F in Repairs Stainless steel Kitchen Plate Rack of size 31" x 36" x 10" of 1 mm thick stainless steel sheet with all internal fittings, and fixed to wall by means of rawl plug steel screws including washer complete all as specified and directed by Engr-in-Charge.all as specified. . Make : Nirali/Jayna/ Diamond
Taking down old point wiring complete for light/fan/socket(5/15 Amps) bell point etc complete with all light fittings accessories, such as switch sockets 5/15 Amps ceiling rose etc including making good to the disturbed surface to match with the existing complete all as specified and directed by Engineer-in-Charge.
M&L for concealed point wiring for the following the PVC insulated and unsheathed cable 1.5 sq mm (nominal area) multistranded copper conductor 1100 v FRLS grade single core including PVC conduit medium grade of appropriate size (not less than 25 mm dia) ISI marked concealed in wall and surface on ceiling complete with all accessories and all as specified including 1.5 sq mm PVC insulated unsheather multistranded copper conductor to common earth and connected to earth dolly for following :- (Note) : 1. The cutting chases shall be finished with cement mortar (1:4) and surface shall be matched with existing surface by using putty, POP etc and applying finishing coat of existing treatment without any extra cost. 2. Rate quoted by the contractor deemed to be included metal flush box of suitable size as required at site and 3 mm thick laminated sheet suitable for mounting of switch and socket etc .
One light point control by one switch
One ceiling fan/exhaust fan control by one switch
One 3 pin socket outlet, 5 Amps independent
One 3 pin 5 amps socket outlet on the same board with other switches
One 3 pin 5 Amps socket outlet independent but below the switch board of light board of light points in the same vertical plane.
One bell/buzzer point contolled by one push button independent
All as per item No. 85.00 above but wire 4.0 sq mm cable for switch socket outlet 3 pin 15 Amps with 4.0 sq mm as earth continuity conductor. (FOR 15 Amps socket point)
All as per item No. 85.00 above but wire 4.0 sq mm cable for switch socket outlet 3 pin 15 Amps with 4.0 sq mm as earth continuity conductor. (FOR geyser/AC point)
S & F switch piano flush type one way 5 Amps complete all as specified and as directed.
Supply and fix ceiling rose three terminal complete all as specified and as directed.
S & F socket outlet 2 in 1, 3 pin, 5 Amps complete all as specified and as directed.
S&F socket outlet 2 in 1, 3 pin, 5 and 15 Amps flush type complete all as specified and as directed.
S&F switch piano, flush type single pole 15 Amps complete all as specified and as directed.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make : Havells/Philips/Crompton/Wipro
Supply and fixing in repair lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
Supply in repair LED lamp 10 watts (Twist lamp), 180 degree rotationl movement, 70 degree swivel movement, diffuser for glare free distribution, base cap B22, 1000 lumens complete all as specified and directed. Make shall be : Crompton/Syska/Philips
Supply and fixing LED tube light fitting mirror type with high output diffuser 2 feet, 10 watts 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make : Havells/Philips/Crompton/Wipro
S & F LED light fitting 1 x 9 W/ 1 x 10 W bulkhead luminaired including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make : Havells/Philips/Crompton/Wipro
Taking down carefully exsiting ceiling fan of any size, sealing cable end, dismantling blades and removing fan and blades and kept aside for reuse complete all as specified and as directed.
M&L for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.
Supply and fixing stepped type electronic fan regulator flush type complete all as specified and as directed.
M& L for making hole to the existing wall surface of any type/girth and at any height for fixing of exhaust fan 200 mm sweep and make good to match with the existing surfaces complete all as specified and directed by Engr-in-charge
Supply and fix ventilating exhaust fan single phase, plastic body 200 mm sweep, complete with shutter and louvers and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastener as approved by Engr-in-charge complete all as specified and directed. Make : Havells/Bajaj/Crompton
Supply and fix in replacement ceiling fan 1200 mm sweep complete with down rod canopy and blades of size 1200 mm sweep,Energy efficient, 5 star rated. Make Havells/Crompton / Bajaj. (Old fan shall be deposited to MES Yard)
Supply and fix in replacement Exhaust fan 300 mm sweep complete with brackets frame and blades, metalic body heavy duty with louvers suitable for 240V 50 Hz supply , make Havells. / crompton / Bajaj (Old fan shall be deposited to MES Yard)
Supply and fix in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.
S & F in repair MCB DB double door SPN 12 Way with 200 Amps rated copper bus bar complete all as specified and as directed.
S & F MCB SP 6-32 Amps complete all as specified and as directed.
S & F MCB SPN 40 Amps complete all as specified and as directed.
S&F RCBOs for earth leakage, overload & short circuit protection double pole, 40 Amps, 100 mA complete all as specified and directed.
M&L for earthing to switch gear/MCB DB with mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0 mm dia by means of galvanised iron nuts, bolts and washer, earth lead connected to eqpt as directed, earth plate surrounded with adequate quantity of charcoal dust mixed with common salt to a packed thickness of 15 cm all around the plate including necessary earth work, PCC chamber and reinforced PCC cover made by PCC 1:3:6 type C-1 as in pit chamber and RCC pit cover 50 mm thick precast RCC 1:2:4 type B-1 duly reinforced with 6mm dia MS bar at 150mm c/c both ways with 10 mm dia MS round bar as handle, 20 mm bore GI pipe medium grade for watering and 15 mm dia GI pipe light grade for protection of earth lead up to 7.5 mtr with funnel, wire mesh etc with and including testing complete all as specified and as shown in electrical plate No 3 of MES sch Part I.
S&F Earthing continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed or any other indicated situation for loop earthing etc. As required 4 mm dia galvanised iron or steel wire complete all as specified and as directed.
Supply and laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and as directed.
Supply and laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 sq mm 2 core complete all as specified and as directed.
Excavation in trenches in hard/dense soil not exc. 1.5 metre wide and n'exc. 1.50m deep for laying cables/pipes/poles and getting out complete all as specified and directed.
Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as specified and directed.
Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and directed.
M&L for sand cushning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches including watering and consolidation, complete all as specified and directed.
Supply and lay well burnt brick class B as protection to cable in cable trenches all as specified and directed
Supply and fix MS seamless steel tube 15 mm dia down rod for hanging the fan including cutting the false ceiling and making good the false ceiling after fixing of fan down rod complete all as specified and directed.
S & F in repair sub main wiring for circuit of size 6 sq mm 2 core (FRLS) alongwith earth wire of 4 sq mm single core of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor including PVC conduit (conealed wiring) of suitable size complete all as specified and directed by Engr-in-Charge. (FOR SPN DB's )
S&F call bell multi music type, AC 230 Volts, single pole complete all as specified and directed.
Supply and fixing bell push flush type 5 Amps complete all as specified and as directed.
Supply and fixing in repair LED bldg security light fitting 15 watts 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including suitable size of GI bracket for mouting of security light to be bend as required shape, pipe bracket shall be made as per direction and site requirement and suitable size 02 Nos MS clamps and nuts and bolts. Make : Havells/Philips/Wirpo
S & F in repair sub main wiring for circuit of size 1.5 sq mm 2 core (FRLS) alongwith earth wire of 1.5 sq mm single core of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor including PVC conduit (conealed wiring) of suitable size complete all as specified and directed by Engr-in-Charge. (for Bldg security light )
Ish Engineers and Contractors
JAIPAL and BROS
PAWAN KUMAR
akhil enterprises
M/S Rohit Enterprises
M/s raj constructions
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .