Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.3 LAccepted-AOC | 1 | Accepted-AOC Less than estimate | |
| 2 | 2₹4.4 L+₹3,379.69 (0.78%)Rejected-Finance | 2 | Rejected-Finance More than estimate |
| Sl No | Description | Qty | Unit | KARUNANITHI L2 | RDM INFRA L1 |
|---|---|---|---|---|---|
| 1.00 | Drilling of borewell anywhere in Tamilnadu including transportation from one place to another place within Tamilnadu in alluvial soil or sedimentary strata of clay and sand or sand, stone, shale, pebbles, boulders etc., by first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia by direct or reverse rotatry mud and circulation method using contractor's rig, fuel, labour, drilling, betonite mud and water required for drilling at the site shown by the TWAD officers including construction of mud pit. below 60mdepth | 51 | Rm | 91,035 ₹91,035 | 90,846.3 ₹90,846.3 Lowest |
| 2.00 | Reaming140/ 150 mm dia pilot bore to 300mm dia bore as directed by the Departmental Officer. below 60mdepth | 51 | Rm | 22,950 ₹22,950 | 22,827.6 ₹22,827.6 Lowest |
| 3.00 | Supply of approved quality PVC CASING PIPE 150mm CS plain pipe With Exice Duty AS PER IS 12818/1992. | 39 | Rm | 17,862 ₹17,862 | 17,803.5 ₹17,803.5 Lowest |
| 4.00 | Supply of approved quality PVC CASING PIPE 150mm RS Slotted pipe With Exice Duty AS PER IS 12818/1992. | 12 | Rm | 9,240 ₹9,240 | 9,180 ₹9,180 Lowest |
| 5.00 | Supply of approved quality 150mm dia OD PVC end plug etc. complete as per standard specification. | 1 | No | 183 ₹183 | 181 ₹181 Lowest |
| 6.00 | Labour charges for inserting 150 mm/200 mm/250 mm dia (Pre Casing pipes assembly (With slots or without slots) in the drilled hole including welding the joints etc., complte and supply packing annular space with pebbles of size and quality as approved by the Executive Engineers of TWAD | 51 | Rm | 19,992 ₹19,992 | 19,864.5 ₹19,864.5 Lowest |
| 7.00 | Charges for developing the borewell with air compressor of 300 cfm capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board officers and conducting yield test by 'V' notch method. | 6 | Hrs | 15,780 ₹15,780 | 15,750 ₹15,750 Lowest |
| 8.00 | Supply and fixing of 32mm UPVC pipe including cost and conveyance of all materials and labour charges etc complete as per standard specification. TWAD P-19 | 24 | Rm | 3,480 ₹3,480 | 3,444 ₹3,444 Lowest |
| 9.00 | Supply and run off 1.5sq. mm 3 core 1.1 KV Grade Copper cable conforming to IS 694/1990 Part I With ISI Marking. | 30 | Rm | 4,050 ₹4,050 | 4,005 ₹4,005 Lowest |
| 10.00 | Supply and fixing of 1HP Submergible Motor pumpset of 20x70 LPM/M of ISI make approved quality, including cost of materials to site etc., complete as per standard specification | 1 | No | 34,000 ₹34,000 | 33,700 ₹33,700 Lowest |
Tender Value
₹5.2 L
EMD Value
₹5,200
Closing Date
12 Aug 2025, 3:00 pmClosed
Executive Officer
Thiruppanandal Town Panchayat
Providing Deep Bore well with Mini Power Pump At Keelaveethi And Extension Of Pipe Line At Remaining Places in Thiruppanandal Town Panchayat.
2025_DTP_588635_1
401/2025/A1 Deep Borewell
Open Tender
Civil Works
Works
90 days
Thiruppanandal Town Panchayat
Please refer the Tender Notice
2 documents required · 2 mandatory
₹0
₹5,200
13 Sept 2025
5 Aug 2025
12 Aug 2025
5 Aug 2025
12 Aug 2025
5 Aug 2025
5 Aug 2025 - 12 Aug 2025
Drilling of borewell anywhere in Tamilnadu including transportation from one place to another place within Tamilnadu in alluvial soil or sedimentary strata of clay and sand or sand, stone, shale, pebbles, boulders etc., by first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia by direct or reverse rotatry mud and circulation method using contractor's rig, fuel, labour, drilling, betonite mud and water required for drilling at the site shown by the TWAD officers including construction of mud pit. below 60mdepth
Reaming140/ 150 mm dia pilot bore to 300mm dia bore as directed by the Departmental Officer. below 60mdepth
Supply of approved quality PVC CASING PIPE 150mm CS plain pipe With Exice Duty AS PER IS 12818/1992.
Supply of approved quality PVC CASING PIPE 150mm RS Slotted pipe With Exice Duty AS PER IS 12818/1992.
Supply of approved quality 150mm dia OD PVC end plug etc. complete as per standard specification.
Labour charges for inserting 150 mm/200 mm/250 mm dia (Pre Casing pipes assembly (With slots or without slots) in the drilled hole including welding the joints etc., complte and supply packing annular space with pebbles of size and quality as approved by the Executive Engineers of TWAD
Charges for developing the borewell with air compressor of 300 cfm capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board officers and conducting yield test by 'V' notch method.
Supply and fixing of 32mm UPVC pipe including cost and conveyance of all materials and labour charges etc complete as per standard specification. TWAD P-19
Supply and run off 1.5sq. mm 3 core 1.1 KV Grade Copper cable conforming to IS 694/1990 Part I With ISI Marking.
Supply and fixing of 1HP Submergible Motor pumpset of 20x70 LPM/M of ISI make approved quality, including cost of materials to site etc., complete as per standard specification
Supply and fixing of 1HP Submergible Motor pumpset of single phase Panel Board with two level guard and auto start of ISI make approved quality, including cost of materials to site etc., complete as per standard specification.
Supply and fixing of 32 Amps DP Switch of 500V with metal clad with fuse and neutral (Side Handle) on suitable TW Board with PWD Earthing ELECTRICAL SD143 P-57
Supply and delivery and fixing of HDPE tank 2000 Litres as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., as per standarad specification.
Labour charges for errection of submercible pumpset in bore well / open well including fixing and jointing submercible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventer, water levelguard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing pumpset and trail run for 10 days.
Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements etc., complete as per standard specification.
Earthwork excavation for foundation in all soil and sub soils of full depth an may be directed refilling the sides of foundation with excavated earth in layers not more than 10 cm thick well complying with standard specification depositing the surplus earth with in the compound in places show by the departmental officers with initial leads and clearing and leveling of site etc., complete complying with standard specification.
Supplying and filling in foundation and basement with Crushed Stone Dust (M- dust) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.
Cement concrete in 1:4:8 (One part of cement, Four part of M sand eight part of ISS gauge HBG metal) using 40mm ISS gauge HBG metal including cost of conveyance of metal from approved quarry at site including cost of cement and all labour watering including mixing dumpling and laying in layer of not more than 15 cm thick and tampering to consolidation curing and all other incidental any complying with standard specification etc., as per T.N.D.SS.No.28.
Brick work in cement 1:5 mix (One part of cement Five part of sand) Using well burnt country brick of size 8 ¾ x2 ¼ x2 ¼ including cost and conveyance of the brick at site including cost of cement and all other incidental charges and labour charges etc. complete for foundations and basement T.N.D.S.S. No: 31.
Reinforced Cement Concrete 1:1 1/2 :3 (One part of cement One and Half parts of M sand Three parts of ISS gauge HBG metal) using 20mm ISS gauge HBG metal including cost and conveyance of metal from approved quarry at site including cost of cement and all labour watering including mixing damping and laying in layer of not more than 15cm thick and tampering to consolidation curing and all other incidental any complying with standard specification etc complete.
Supplying fabricating and placing to position MS or RTS rods including cost of steel, binding wire and labour charges for cutting bending, cranking, tying and lying in position etc., all complete as per standard specifications.
Plastering with CM 1:5 mix 12 mm thick in all floors complying with including cost and conveyance all materials and labour charges for mixing applying and finishing smooth etc., complete as per standard specification.
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specification.
Supply and run of 2 of 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD 64.
Manufaturing the precast cement concrete slab of size 60x45x7.5cm in plian cement concrete 1:2:4mix using 20mm ISS HBG Metal from approved quarry the rate shall include mixing concrete using a mixer machine laying concrete in steeel moulds after prperly oiling them and fibrating finishing the top surface smooth placing the slab along with the mould and base plate and casting yard,removing the molud carefully after initial setting placing the slab in the curing take after 24 hours from the time of casting removing them from curing take after 7 days of curing stacking them in stacking yard within a lead of 100 meter and curing them for full period by sprinkiling water as dirrected by Departmental officers-10 M2
Supply and fixing of TNEB meter board suitable for 32 A single phase service connection with 32A fues unit (500 V) 32A neutral link and earth link (1"X18" copper flat) on TW plant of size 375mm X 300mm X19 with supporiting TW reepers of 1 " thick an either side withpainting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wirefrom EB meter to fuse unit (SD No.125) Page No -51
Earth work excavation and depositing on bank with initial lead of 10 M and lift of 2 M in narrow trenches for laying of pipes for water supply and sewerage works in the following type of soils as directed by departmentel officers.
Supply of approved quality PVC PIPE of 90mm dia 6Kg/CM2 with exise duty as per IS 4985/2000 including cost and conveyance of all materials and labour charges etc complete as per ISI specification.
Lowering PVC rigid/DWSC pipes and specials to trench and laying to proper grade and alignment jointing with PVC couplers with cement paste and testing to the required pressure including conveyence of water for filling during testing etc complete as per standard specification.
Refilling with excavated soil (other than sand) complying with the standard specification for filling in foundation and Pipe line works etc complete as per standard specification.
Collection Supply & Fixing of Cut Stone Pillar of size 0.15x0.15x2.10 at 3.00 c/c including cost of earth work to a Pit of size 0.45x0.45x0.60 fixing the Cut stone pillar in the position and filling the Pit of size 0.45x0.45x0.30 with C C 1:3:6 etc., Complet. As per Std Specifications.
Providing fencing with chain link diamond mesh 50mm x 50mm size made of 10 swg GI wire,including the cost of G.I binding wire and top of the mesh linked with 10 swg GI wire etc., completed
Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.
Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.
KARUNANITHI (BID ID -1426266)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .