864/WS-59/2021-22

Amount

M&L for complete removal of existting treatment of wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old plastered or unplastered wall surface including preparation complete all as specified and directed.

M&L for complete removal of existing treatment of wall surfaces and applying two coats of cement base paint over a coat of cement primer including preparation complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan built in CM 1:6 compete all as specified and directed.

Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc compete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement compete all as specified and directed

M&L for preparation of new plasted surface of wall and applying two coats of cement base paint over one coat of cement primer compete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or grith and applying two coat of synthetic enamel paint compete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for compete all as specified and directed.

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight protion, drilled and countersunk for balusters running bars, for doors, balusters, noising to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. : flats iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work confirming to Fe.290.Gde-E-165 compete all as specified and directed.

M&L for preparation of new steel surfaces of any description not other wise described over 10 cm width or grith and applying two coat of synthetic enamel paint over a coat of red oxide primer compete all as specified and directed.

M&L for complete removal of existing treatment of wall surfaces and applying two coats of oil bound distemper over a coat of primer including preparation complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of plain corrugated steel sheeting, any gauge thickness, including nanital or similar pattern roof covering compete all as specified and directed.

Ditto all as per serial item No. 13.00 described here-in-before but except sheets

S&F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or typing at crossings with & provn of galvanised mild steel wire, staples or steel pins, fixed in repair etc. as directed (each line wire to be measured) compete all as specified and directed.

Restraining resecuring including making good staples galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or typing at crossings with & provn of galvanised mild steel wire, staples or steel pins, fixed in repair etc. as directed (each line wire to be measured) compete all as specified and directed.

S&F in repairs concertina coil, 610 mm dia (50 spirals per coil) weight approx 8 kg (+5%) expandable 6-8mtrs, consisting of 2.6 mm dia heavy galvanised high tensile spring steel wire as per IS-4454, Barb (Barb length 24+mm, pitch between two barbs 35+1mm) made of 0.5mm thick low carbon heavy galvanised cold rolled steel sheet as per IS-513, heavy duty steel clip as per IS-2062 and Epoxy resign coating for anti corrosion compete all as specified and directed.

M/S Himalayan Construction and Co.

M/S NEW IQBAL ENTERPRISES

M/S Mohd Shafi Bhat

M/S PARVEZ AHMAD LONE

mirandcompany

M/S Mian Rashid Wani

M/S Gh Qadir

M/S ATTAR BUILDERS