07 Webel IDM IT Park HWH MiscElec 21 22 07

Amount

DISTRIBUTION BOARDS

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB/MCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attchment

8 Way Enclosure

Supplying and fixing double door SPN MCB Distribution board with IP-42/43 protection, concealed on wall/surface on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attchment

2+4 way enclosure

Supplying and fixing 240/415 V MCB of breaking capacity 10 KA & C characteristics on din rail of existing DBS and necessary connection

SITC of 0-60 A digital dual source meter along with associated wiring for DG connection including all accessories as required

MV Cable & Termination

Supplying, laying,testing and commissioing of PVC/XLPE insulated AL conductor steel armoured 1.1 KV grade cable. The cable shall be laid underground/on wall/in pipe/trench -the rate shall be included necessary clamping arrangement as required with 02 nos 8 SWG GI Wire

3.5 C X 25 SQMM cable

Cable End Termination

Providing end termination for the below listed cross section cables with necessary gland , Crimping type lugs,gland eating ets.as required

Compression Glands

For 3 1/2 core

upto 25 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make),tapes,antocorrosive paste & jointing materials

3 1/2 core 25 sqmm cable

SUB MAINS/CIRCUIT MAINS

Supplying & drawing of wiring in 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire in 20mm size with PVC rigid/flexible conduit (as per direction by EIC) 'FRLS' including necessary Fittings and necesaary connections as required

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.

2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC.

POINT WIRING

Supplying and carrying wiring for light, fan and dependent socket points by using 16 SWG MS/PVC conduits with threaded joints of required dia as per IS 732, MS/PVC conduit accessories, MS flexible conduit with couplers for drops with accessories, 2 x 1.5 + 1 x 1.5 sq mm, 1100V grade FRLS PVC insulated copper wires approved 6A modular type switches and sockets with plates and all accessories for fixing in modular furniture, GI/PVC boxes and other point wiring accessories and carrying out surface/concealed conduit system of wiring as per requirement with all wiring materials. Conduits shall run on surface of the ceiling above false ceiling and concealed in wall by cutting chase in wall and mending good of all the damages.

All points shall be earthed with 1.5 sq mm FRLS flexible copper wire. Wires shall be terminated at light fixtures with ferrules, 16A, 4 way connector, wire ends shall not be kept loose/bare.

The rate shall also include all accessories of MS conduits, etc, necessary civil works for embedding conduits and boxes below false ceiling, wherever applicable.

1 light point controlled by a 6A switch with indicator

2 light points controlled by a 6A switch with indicator.

3 light points controlled by a 6A switch with indicator

1 Fan point controlled by a 6A switch with indicator

UNITS IN MS ENCLOSURE

SIT & C of the following components like approved plate type modular switches, socket etc, duly wired. All the switch sockets are with front plate and without boxes since the same is covered under different item.

1 No. - 6/16A, 6 pin in universal socket controlled by 16A, SP switch with indicator, RP for UPS incoming supply etc with MS/PVC Box.

Same as above but without MS/PVC Box

3 Nos - 6A, 3 pin socket controlled by common 16A, SP switch with indicator, workstations with MS/PVC Box

Same as above but without MS/PVC Box

LIGHT FIXTURES

Supply, installation, testing and commissioning of light fixture complete with all accessories, as required. Erection rate shall include necessary GI chain and supporting suspending hardware.

Recessed mounted circular down lighter (Philips Cat No. DN195B LED 20S - 6500 PSU WH S1).

LED Strip light (Philips 31308 LED strip 5M light with driver (Warm White)

Supply, Installation, Testing & Commissioning of "Decorative Wall-Mounted" oscillating type fan with inbuilt speed controller. The rate shall be inclusive of fixing & mounting accessories and making necessary connections as required. Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

450mm Sweep wall fan. (HAVELLS /Crompton/Bajaj)

EMPTY CONDUITS

Supply and fixing of FRLS PVC (ISI marked) conduit (rigid/flexible) of various dia, exposed or concealed with all accessories like tees, bends, glands etc. JBs (PVC) as required and fish wire etc for wiring purpose complete.

32 mm dia FRLS PVC conduit (2 mm thick)

Supplying and fixing of PVC casing caping with all accessories including elbow as required.

A C SOCKETS

Supply and flush fixing of modular type heavy duty plug socket unit comprising of a double pole MCB, 20A/25A/32A socket and plug top (with indicator) and solid state type starter units of electronic type with highflow voltage protections, O/L protect etc and suitable for 1.0/1.5/2.0 TR AC Units modular type and completely wired including cutting chases and mending good damages, painting, earthing, complete, as per required for AC Units.

Supply & laying of 40 mm dia UPVC Pipe

Supply & Fixing Modular type RJ45 sutable for CAt6 cable with PVC box and top cover plate

SATABDI ENGINEERING COMPANY

PACIFIC ENGINEERS

KUNDU ENTERPRISE