REPAIR TO WALL PLASTER, FLOORING AND OTHER B/R NATURE WORKS UNDER AGE B/R-I OF GE (W) AGRA

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc omplete all as specified and directed by Engr-in-Charge

M&L for brick work with sub class 'B' bricks old size, straight or curved on plan exc 6m mean radius built in CM 1:6 omplete all as specified and directed by Engr-in-Charge

All as per item No.3 above but except bricks complete all as specified and directed by Engr-in-Charge. Note : Bricks obtained from demolition of brick work shall be reused after cleaning.

Taking down cement plaster of any description on brick, concrete, ceiling surfaces etc including raking out joints, hacking for key, scrubbing down with water etc omplete all as specified and directed by Engr-in-Charge

M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately)

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls and finishing the surface even and fair omplete all as specified and directed by Engr-in-Charge

M&L for 15mm thick rendering in CM 1:4 on brick surfaces of walls & finishing the surface even & smooth with water proofing compound complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately.

M&L for rendering 10mm thick in CM 1:3 on ceiling surface finished even and fair without using extra cement omplete all as specified and directed by Engr-in-Charge

Supply only integral water proofing compound omplete all as specified and directed by Engr-in-Charge

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash omplete all as specified and directed by Engr-in-Charge

M&L for Preparation of new plastered surfaces of walls and applying applying two coat of distemper oil emulsion (washable) on wall complete all as specified and directed by Engr-in-Charge

M&L for applying three coats of white wash on ceilling including preparation of new plastered or un-plastered surfaces, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge

M&L for coloured glazed ceramic joint freee tiles in vertical surface 350x250mmx7mm / 450X350 X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles including taking down cement plaster, wall tiles and rendering 10mm thick plastering in CM 1:4 on brick wall complete all as specified and directed by Engr-in-Charge

M&L for ceramic non-skid coloured tiles (1st quality/ premium quality) 7 to 8mm thick, (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured or white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed or bedding layer of cement mortar in CM 1:6 complete all as specified and directed by Engr-in-Charge

M&L for ceramic non-skid coloured tiles (1st quality/premium quality) 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge

M & L for non skid ceramic coloured tiles (Ist quality) 7 to 8 mm thick (Square/ rectangular), area of each tile exc 0.11 Sqm but n.exc 0.18 sqm on vertical surfaces such as skirting, dado and rises to steps etc. including 10mm thick cement plaster in CM 1:4 set and set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified and directed by Engr-in-Charge.

M&L for light shed vitrified ceramic tiles 10mm thick (square /rectangular), polished area of each tiles not exc 0.38 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed by Engr-in-Charge

M&L for vitrified ceramic light or any shade tiles 10mm thick (square /rectangular), polished (Ist quality/Premium quality), area of each tiles n' exc 0.36 Sqm in verticle surfaces etc, laid over and including 10 mm thick plaster in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed by Engr-in-Charge

M&L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, with grey cement and pigments, set & jointed in neat cement slurry and pointed with grey cement & pigment in floors laid over and including 20 mm thick screed bed or bedding layer including dismantling existing tiles with screed bed complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillar, window cills, cooking platforms and like and laid over and including 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge

M&L for machine cut kota stone 18-20 mm thick as in floor, staircase, landing etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and mirror polishing, over and including 20mm thick screed bed in CM (1:6) as in floor complete all as specified and directed by Engr-in-Charge

M&L for machine cut kota stone 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering as bed or bedding layer in 15mm thick CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed by Engr-in-Charge

M&L 75mm thickness PCC 1:3:6, type C2 (Using 40mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed by Engr-in-Charge

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor/paving/path (40 mm thick) laying finished even and fair wihtout using extra complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm bore (external threaded) bib taps cast copper alloy, cromium plated, long body, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge

S&F in repairs bib tap standard of PTMT, any colour, high pressure, screwed for iron pipe or for union, bore of pipe 15mm (min wt 90 gms), complete all as specified and directed by Engr-in-Charge

S&F in repair PVC flushing cistern 10 Ltrs capacity, low level, white with inlet ball & float valve and handle including brackets complete all as specified and directed by Engr-in-Charge

S&F in repairs stop/angle valve, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union bore of pipe 15 mm complete all as specified and directed by Engr-in-Charge

S&F in repairs stop valve long shank (Concealed) (external threaded) cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union and fixed in repairs bore of pipe 15mm, complete all as specified and directed by Engr-in-Charge

Taking up or down 15mm dia steel tubing and connections etc complete all as specified and directed by Engr-in-Charge

Taking up or down 20mm dia steel tubing and connections etc complete all as specified and directed by Engr-in-Charge

S&F 15mm dia bore GI tubing, medium grade, galvanised with all fittings, fixed to walls, ceiling or laid in floors complete all as specified and directed by Engr-in-Charge

S&F 20mm dia bore GI tubing, medium grade, galvanised with all fittings, fixed to walls, ceiling or laid in floors complete all as specified and directed by Engr-in-Charge

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth etc brick walls complete all as specified and directed by Engr-in-Charge

S&F in repairs vitreous china wash down water closet pan pedestal pattern white (excluding fixing bolt flushing cistern and flush pipe) complete with seat cover white closed pattern with flat bottom, mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge

S&F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests and necessary concrete bedding (excluding flushing cistern and flush pipe) complete all as specified and directed by Engr-in-Charge

S&F in repair PVC connections 15mm size, 450mm long with PTMT nuts on both ends complete all as specified and directed by Engr-in-Charge

S&F in repairs Vitreous china wash basin white flat back size 550 x 400 mm including waste pipe and coupling, chain plug brackets complete all as specified and directed by Engr-in-Charge

S&F pillar taps of PTMT any colour high pressure screwed for iron pipe or for union and fixed bore of pipe 15mm (min wt 110 gms), complete all as specified and directed by Engr-in-Charge

S&F in repairs stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495.mm x420mm with bowl size 410mm x330mm x160mm complete all as specified and directed by Engr-in-Charge

S & F swivel shower rose of PTMT any colour for fixing with 15 mm pipe (Min wt 40 gms) as in repairs including fixing to steel pipe or union complete all as specified and directed by Engr-in-Charge

S&F in repairs PVC Jet spray 15mm bore suitable for EWC complete all as specified and directed by Engr-in-Charge

S&F in repair CP health faucet 15mm bore with chromium plated PVC tube 1.20 mtr long complete all as specified and directed by Engr-in-Charge

S&F in repairs brass CP wall mixer for mixing of hot & cold water screwed down for iron pipe and fixed to 15 mm pipe complete all as specified and directed by Engr-in-Charge

S&F in repairs brass CP mixer for mixing of hot & Cold water suitable for Wash basin, screwed down for iron pipe and fixed to 15 mm pipe complete all as specified and directed by Engr-in-Charge

Taking down chowkhats or frames not exc 1.5 Sqm each with shutters complete all as specified and directed by Engr-in-Charge

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, incl fixing arrangement, suppling & fixing in opening as per specification complete all as specified and directed by Engr-in-Charge

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified in clause No. 8B.2 at Sl page No. 143 to 144 and shown in drawing on sl page No 156 of SSR 2010 respectively and as directed.

S & F aluminium alloy handles size 150mm fabricated type anodised complete all as specified and directed by Engr-in-Charge

S&F aluminium anodized 200mm long barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge

S&F butt hinges medium weight cold rolld mild stainess steel of 100mm size complete all as specified and directed by Engr-in-Charge

S&F in repair 100 mm square PTMT grating (Min weight 25 gms)complete all as specified and directed by Engr-in-Charge

C P Singh and Co (BID ID -3092238)

ASHISH SHARMA (BID ID -3092295)

M/S A A DRILL EXPERT (BID ID -3092094)

Rahul Construction Co (BID ID -3092254)

M/s Kok Singh Sisodia (BID ID -3091947)

M/s S. K. Construction Co. (BID ID -3092105)

M/S KAMAKHYA CONTRACTORS (BID ID -3091284)

M/S RADHEY GOVIND ENTERPRISES (BID ID -3092073)

BS CONSTRUCTION (BID ID -3085436)

M/S OMKAR SINGH YADAV (BID ID -3091685)