Balance Work of OPD Block of Maternity Hospital at SKIMS Soura

Amount

Wiring for 1 way light points with 1.5sqmm,1100 volts grade stranded copper FRLS wires in minimum 25mm dia PVC conduit surface as required with grid plate 230V,AC,1No, 5,6A SP switch mounted on modular plate and min.1.6mm thick G.I outlet box and 3 way 5A terminal shrouded good quality connector complete for following combination of light points with 1/1.5 sqmm FRLS green pvc insulated stranded copper 1100v,wire for earth upto switch box and light fixture and fans with lugs. (quote without the cost of PVC conduit and GI box) (Make as per annexure. ) a) One Light controlled by 5 amp switch

Wiring for ceiling Fan points same as above in item No 1. but controlled by electronic stepped regulator 200 watts and 5A control switch and 15mm dia circular or hexagonal in 1.6mm thick MS zinc passivity sheet steel body and 12mm dia MS bar hook complete with white ,3mm thick 200mm dia laminated circular cover.(excluding the cost of dimmer) (Make as per annexure. )

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (Make as per annexure. )

Wiring for power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.(Loop 2 points together)(excluding PVC conduit) (Make as per annexure. )

Wiring for exhaust fan points same as above in item no. 1. but with 230v ac,3 pin 5/6 amps socket near the exhaust fan and controlling 230 v ac, 5/6a,sp grid plate mounting switch away from exhaust fan and wiring as follows with 1/1.5sqmm FRLS insulated stranded green copper conductor for earth with lugs. (quote without the cost of PVC conduit) (Make as per annexure. )

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. (Make as per annexure. )

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Make as per annexure. )

Wiring for light plug with 2X2.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.(excluding PVC conduit) (Make as per annexure. )

supply and fixing of 5 pin 5/6 amps socket outlets for small power with 230v ac 1 no 5/6 amps SP switch, on same modular grid plate mounting. (Make as per annexure. )

supply and fixing of 3nos x5 pin 5/6 amps socket outlets for UPS power with 230v ac 1 no 5/6 amps SP switch, on same modular grid plate mounting. (Make as per annexure. )

Supply and fixing of rigid PVC conduit with conduit accessories ,recessed or surface including cutting chases, fixing with J hooks, refilling with mortar and making good in approved manner or providing saddles, screws for fixing on surface or above false ceiling complete for electrical for circuit wiring. The below mentioned conduit sizes are to be used as per the site/floor thickness and requirement of the site Engineer. (Make as per annexure. )

50mm dia,2.5mm thick

40mm dia,2mm thick

32mmdia ,2mm thick

25mm dia ,1.6mm thick

Wiring for circuits for light/fan//5A plugs/exhaust fans/ small power points etc with following size FRLS pvc insulated 1100v grade multi strand copper conductor wire, FRLS green insulated multi strand copper conductor for earth wire in the existing conduits complete including connections all the three wires for phase, neutral and earth shall have to be taken to switch board and then distributed further. a) 2x2.5sqmm +1x2.5sqmm stranded copper FRLS pvc insulated. (Make as per annexure. )

Installation/ fixing in position, effecting proper connections, testing and commissioning of twin tube/single tube fluorescent tube light fixture fixed on ceiling / recessed in ceiling with all fixing accessories as required.

Installation/ fixing in position, effecting proper connections, testing and commissioning of single phase exhaust fan and louvered shutter complete. Allow for necessary rag bolts as required for grouting the fans.

Installation/fixing in position, effecting proper connections, testing and commissioning of ceiling/wall fans and regulators including providing 0.6 meter long 19 mm dia MS down rod, 1.5 Sq. mm PVC insulated copper conductor wires for connections from ceiling rose to fans and all other fixing accessories required and painting the down rod complete.

Supply ,laying, testing and commissioning of multi strand copper conductor 1100v grade FRLS pvc insulated sub main wires in rigid MS conduit of required sizes including multi strand copper conductor FRLS green insulated earth wire 2 nos for 3 phase and neutrals and 1 no. for 1 phase and neutrals supply system.

4x10+2x6 Sqmm (RYBN+2E)

4x16+2X10 Sqmm (RYBN+2E)

Supplying and fixing in position, testing and commissioning of the following recessed in wall indoor cubical type, with dust proof, powder coated, hinged with interconnections with copper wires, tapes, cable glands, bonding to earth. excluding the switch gears as per the drawings and the material shown below.(make as per annexture).

VTPN 8 WAYS(LIFT) having provision of 4 P 100/160 A as incoming .

MCB BOARDS 8WAY TPN

MCB BOARDS 4WAY TPN

Supply Installation testing & commissioning of following MCB/ MCCB’s (adjustable) of various rating with fittings and accessories. (Make as per annexure. )

TPN MCB’s 32 TO 40AMPS C curve B/C 10 KA

TPN MCB’s 63AMPS C curve B/C 10 KA

SP MCB’s 6 TO 20 AMPS C curve B/C 10 KA

MCCB 100AMPS B/C36 KA 4 pole

Sub Main Distribution Board Design,fabrication,assembly,testing and commissioning of floor mounted, free standing, totally enclosed,indoor,cubicle,extendible compartmentalized, front operational,vertical,pest and vermin proof, Main LT panels/main distribution boards manufactured from 2.0mm thick CRCA sheet steel frame work and 1.6mm thick covers with hinged detachable,locable,front and back open able dual compartmentalized individual chamber door.3mm thick gland plates having gone through seven tank process of finishing, powder coated in required shade.( 2 SET OF BUS)The bus bar shall be aluminum with DMC supports. The equipments shall be of the makes as called for in list of makes, other accessories like lift hooks, cable alleys, base, compartmentalization etc shall be as per design approved, earth bus of respective materials shall be provided as standard feature. continued in below column

Incoming a) 1 No. of 100 amps TPN 36 KA MCCB.(LIGHTING) with over current and short circuit releases b) 1 No. of 160 amps TPN 36 KA MCCB.(POWER) with over current and short circuit releases c) 1 No. of 100 amps TPN 36 KA MCCB.(OT/Spare) with over current and short circuit releases d).0-200A, Ammeter, ASS and CTs 200/5A ratio -2 set. e).0-200A, Ammeter, ASS and CTs 200/5A ratio -2 set. f).0-200A, Ammeter, ASS and CTs 200/5A ratio -2 set. g).0-500V, Voltmeter, VSS and 2A control fuses-2 set. h).Phase indicating lights with fuses in RYB colour -2set. OUT GOING 06No’s of 63 amp TPN MCB 06No’s of 40amp TPN MCB ( Note make of MCCB/MCB's as per annexure )

Design,fabrication,assembly,testing and commissioning of floor mounted, free standing, totally enclosed,indoor,cubicle,extendible compartmentalized, front operational,vertical,pest and vermin proof, Main LT panels/main distribution boards manufactured from 2.0mm thick CRCA sheet steel frame work and 1.6mm thick covers with hinged detachable,locable,front and back open able dual compartmentalized individual chamber door.3mm thick gland plates having gone through seven tank process of finishing, powder coated in required shade.( 2 SET OF BUS)The bus bar shall be aluminum with DMC supports. The equipments shall be of the makes as called for in list of makes, other accessories like lift hooks, cable alleys, base, compartmentalization etc shall be as per design approved, earth bus of respective materials shall be provided as standard feature. continued in below column

Incoming a) 1 No. of 100 amps TPN 36 KA MCCB.(LIGHTING) b) 1 No. of 163 amps TPN 36 KA MCCB.(POWER) c).0-200A, Ammeter, ASS and CTs 200/5A ratio -2 set. d).0-500V, Voltmeter, VSS and 2A control fuses-2 set. e).Phase indicating lights with fuses in RYB colour -2set. OUT GOING f) 08No’s of 63 amp TPN MCB g) 08No’s of 40 amp TPN MCB ( Note make of MCCB/MCB's as per annexure )

Design,fabrication,assembly,testing and commissioning of floor mounted, free standing, totally enclosed,indoor,cubicle,extendible compartmentalized, front operational,vertical,pest and vermin proof, Main LT panels/main distribution boards manufactured from 2.0mm thick CRCA sheet steel frame work and 1.6mm thick covers with hinged detachable,locable,front and back open able dual compartmentalized individual chamber door.3mm thick gland plates having gone through seven tank process of finishing, powder coated in required shade.( 2 SET OF BUS)The bus bar shall be aluminum with DMC supports. The equipments shall be of the makes as called for in list of makes, other accessories like lift hooks, cable alleys, base, compartmentalization etc shall be as per design approved, earth bus of respective materials shall be provided as standard feature. continued in below column.

Incoming a) 1 No. of 100 amps TPN 36 KA MCCB.(LIGHTING) b) 1 No. of 250 amps TPN 36 KA MCCB.(POWER) c) 1 No. of 63 amps TPN 36 KA MCCB.(OT) d) 1 No. of 100 amps TPN 36 KA MCCB e) 0-200A, Ammeter, ASS and CTs 200/5A ratio -2 set. f).0-500V, Voltmeter, VSS and 2A control fuses-2 set. g).Phase indicating lights with fuses in RYB colour -2set. OUT GOING h) 06No’s of 63 amp TPN MCB i) 06No’s of 40 amp TPN MCB j) 06No’s of 40 amp TPN MCB

Main Distribution Board Design,fabrication,assembly,testing and commissioning of floor mounted, free standing, totally enclosed,indoor,cubicle,extendible compartmentalized, front operational,vertical,pest and vermin proof, Main LT panels/main distribution boards manufactured from 2.0mm thick CRCA sheet steel frame work and 1.6mm thick covers with hinged detachable,locable,front and back open able dual compartmentalized individual chamber door.3mm thick gland plates having gone through seven tank process of finishing, powder coated in required shade. The bus bar shall be aluminum with DMC supports. The equipments shall be of the makes as called for in list of makes, other accessories like lift hooks, cable alleys, base, compartmentalization etc shall be as per design approved, earth bus of respective materials shall be provided as standard feature. continued in below cell

Incoming 1 No. of 1000 amps Four pole ACB electrically operated B/C 50 K a).0-1000A, Ammeter, ASS and CTs 1000/5A ratio -1 set. B).0-500V, Voltmeter, VSS and 2A control fuses-1 set. c).Phase indicating lights with fuses in RYB colour -1 set Bus Bar 1200 amp TPN Aluminum bus bar of suitable length. Outgoing 04No’s of 125amp TPN 36KA MCCB 02 No’s of 160 amps TPN -36KA MCCB. 01 No’s of 315 amp TPN 36KA MCCB. 01 No’s of 250 amp TPN 36KA MCCB 03 No’s of 63 amps TP 25KA MCCB. MD. B. – 1 described as above. ( Note make of MCCB/MCB's as per annexure )

Supply, testing & commissioning of the following sizes of 1.1 KV XLPE insulated Aluminum conductor armoured cables laid on cable tray/in trenches over a bed of sand excavation of trenches in an approved manner as required.(excluding cost of laying ) ( Note make of cables as per annexure )

3.5 x 300 sqmm cable

3.5 x 240 sqmm cable

3.5 x 150 sqmm cable

3.5 x 95 sqmm cable

3.5 x 50 sqmm cable

Supply and laying multi stranded 4 core 16 sqmm cu cable (OT)

Supply and making terminal joints of double compression heavy duty glands for the following sizes of 1.1 KV XLPE insulated Aluminum conductor cable including providing terminal lugs, crimping the joints effecting terminal connections to the equipment complete as required.

3.5 x 300 sqmm cable

3.5 x 240 sqmm cable

3.5 x 150 sqmm cable

3.5 x 95 sqmm cable

3.5 x 50 sqmm cable

4 core 16 sqmm cable

Cable Laying Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

Above 35 sq. mm and upto 95 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Above 185 sq. mm and upto 400 sq. mm

Providing and laying in position the following sizes of Hume Pipes in road crossing and paved area, including collar, joints filled with cement mortar 1: 4 (1 cement: 4 coarse sand) finished neat and providing 75 mm, thick cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 crushed stone aggregate 20 mm, and down gauge) all round pipes, laid compact and finished smooth complete.

150 mm dia pipe

Providing earthing stations at locations as called for with 600 x 600 x 6 mm, thick G. I. electrode 20 mm dia medium class G. I. pipe (Indian Tube Company) make or approved equal. G. I. funnel with 20 gauge G.I. wire mesh masonry chamber with concrete base, G.I. manhole cover with frame (300 mm x 300 mm) and bitumastic paint and packing the mixture of Charcoal and salt around plate electrode complete

Providing and fixing in position the following G. I. tape/wires including providing all fixing accessories and effecting proper connections.

6SWG G. I. wire

25 mm x 5mm G. I. tape

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt,spring, washer excavation and re-filling etc. as required.

Supplying of Surface Mounted 40W or close to 40 watts LED optic fitting operating voltage 140V -270V ,50Hz operating temperature -10Deg C to 50 Deg C , Lumens /watt greater than 110 , IP 20,CRI greater tha 75 with Aluminium body complete as required. ( Note make as per annexure )

Supplying of Surface Mounted 40W or close to 40 watts LED single box type fitting operating voltage 140V -270V ,50Hz operating temperature -10Deg C to 50 Deg C Lumens/watt greater than 120, IP 65,CRI greater than 75 complete as required complete as required . ( Note make as per annexure )

Supply installation testing and commissioning of 300mm dia 1400 RPM exhaust fan complete with all accessories as required . ( Note make as per annexure )

Supply at 48” dia 1400 RPM ceiling fan complete with all accessories as required .( Note make as per annexure )

Supply and fixing of 3 phase industrial switch 20 amps as per standard.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.( Note make as per annexure )

4 Module (125mm X 75mm)

6 Module (200mm X 75mm)

8 Module (125mm X 125mm)

Green stars