Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.6 LAccepted-AOC 30 INDUSTRIAL AREA KOKAR RANCHI 834004 JHARKHAND | RANCHI | JHARKHAND | 834004 | L1 | Accepted-AOC lowest bidder | |
| 2 | l2₹15.5 L+₹1.7 L (12.6%)Rejected-Finance | l2 | Rejected-Finance Other than lowest tender |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
12 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Amla
GE AF Amla, Betul Dist 460553 (MP)
Repair/Replacement to tilling, PCC Floors, Paths, Plinth Protection, Brick work and Certain B/R Works in Domestic area at AFS Amla.
2023_MES_619019_1
8553/E8 OF 2023-2024
Open Tender
Civil Works
Item Rate
274 days
GE (AF) Amla
As per tender document
8 documents required · 8 mandatory
₹500
GE (AF) Amla
₹30,000
Yes
8 Nov 2023
15 Sept 2023
19 Oct 2023
15 Sept 2023
12 Oct 2023
25 Sept 2023
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for Joint free, Non - skid coloured ceramic tiles; 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match set, over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M&L for Non - skid coloured ceramic tiles; 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in coloured cement to match the light shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
Ditto all as per item No 03 above but in vertical surfaces as in skirtings, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in cement mortar 1:3 complete all as specified and directed.
M&L for Light Shade; Vitrified Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
Ditto all as per item no 05 above but in vertical surfaces as in skirtings, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in cement mortar 1:4 complete all as specified and directed.
M&L for digital coloured glazed ceramic tiles in vertical surfaces 350 x 250 x 7mm/ 450 x 300 x 7 to 8 mm thick, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles including 10mm thick backing coat in 1:4 cement mortar complete all as specified and directed.
M&L for coloured glossy finish heavy duty Endura tiles 30cm x 30cm x 10 mm thick conforming to IS 4457: 2007, set, jointed and pointed in neat cement slurry with white cement with pigment in floors including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.
Material and labour for Machine cut kota stone flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over and including 15 mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes and also in scattered places complete all as specified and as directed.
Material and labour for Granite 18 to 20 mm thick table rubbed & polished in steps , jambs, cills, shelves etc including cutting of holes for fixing WHB in cement mortar 1:4 & pointing with white cement with marble dust using admixture of pigment to match with the shade of granite over and including 15mm thick screed in CM 1:4 complete all as specified and as directed .
Demolition of plain cement concrete as in ground floor and paving not exceeding 15 cm thickness below or above ground level (unreinforced concrete) including disposing of debris off the premises complete all as directed.
M&L PCC 1:4:8 type D1(using 40mm graded stone aggregate) as in sub base 75mm thick,finished fair & even complete all as directed.
M&L for 100 mm thick; Plain Cement Concrete (PCC) 1:2:4 Type B-2 using 40mm graded stone aggregate, as in top layer of the floor, pavings etc., including finishing the surface by spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all specified and directed.
M&L for 75 mm thick; PCC 1:3:6 type C2 using 40mm graded stone aggregate, as in plinth protection, including finishing the surface by spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green and making saucer drain complete all as specified and directed.
Material and labour Plain cement concrete B-0 type (1:2:4) using 12.5 mm graded crushed stone aggregate as in copings, bed plates, benching and the like finished fair & even, including necessary form work complete all as specified and directed.
Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade A
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing the debris outside the defence land all as specified and directed by Engr-in-charge
M&L Fly ash brick 75 kg/cmsq compressive strength. Modular size , is straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified.
Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engineer - in -Charge.
Material and labour for Rendering 10mm thick on concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement to RCC ceiling, chhajjas, roof projection,fascia,fins,parapet, waist slab on RCC staircase etc and similar likes at any height including necessary scaffolding, ladder, formwork etc complete all as specified and directed.
Material and labour for rendering 15 mm thick on fair faces of brick or stone surfaces of walls in cement mortar 1:6 finished even and smooth without using extra cement with and including sagol finish complete all as specified and directed.
M & L (10+5)mm thick for rendering fair faces of brick work or Concrete surface in two coats 10mm thick in CM(1:6) as under coat 5mm thick CM (1:4) as finishing coat in two separate layer mixed with Liquid water proofing compound finished even and smooth without using extra cement at any height including necessary scaffolding, ladder, formwork etc complete all as specified and as directed. Note: Water proofing compund shall be measured and paied seperately.
Supply only Liquid water proofing compound complete all as specified and directed.
M&L for preparing newly plastered surfaces of walls and applying two coat of cement base paint over a coat of alkali-resistant primer complete all as specified and directed.
M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk white primer complete all as specified and directed.
Supply & Fixing in repair vitreous China squatting pan, Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed.
S&F in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete all as specified and directed.
S&F EWC one piece, floor standing of size 70cm x 37 cm x 76 cm/ 71.5 cm x 37.5 cm x 79.5 cm/ 71 cm x 37 cm x 76 cm of white or colour with P or S trap, flushing cistern, square design, crafted with soft corner or quick & easy cleaning, clean, sleek & seamless look including seat cover and other connected accessories complete all as specified and directed. Make:- Hindware Cat No. 92577, Cera Cat. No. S1013106, Parryware Ref no. C849F, Jaquar
S&F PVC (SWR) 110mm dia S trap including connecting to out let with solvent cement complete all as specified and directed.
M & L in repairs for PVC nahani trap, plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with solvent cement of dia 75mm complete all as specified and directed.
S&F in repair 10 litre capacity vitreous china valveless syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm fixed to pipes and valves complete all as specified and directed.
S&F in repairs vitreous china wash hand basin white flat back size 550mmx400mm excluding taps waste chain and plug and percelain stopper including two coats of synthetic enamel paint over coat of red oxide primer on exposed surfaces of breckets waste coupling brass CP 32 mm bore with long screwed shanks bedded in red lead cement and other end fixed and pillar taps 15 mm bore cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks screwed and removing debris out of MoD land all as specified and directed.
Supply and fixing in repair Vitreous China Urinal, Half stall type, white including 32mm dia galvanized MS waste pipe of suitable length and brass urinal spreader and doom type stainless steel waste coupling 32mm dia (exluding flushing cistern, flush pipe) and fixing of (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, and Union for discharge except pipes.
M&L for 32mm dia; Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed including dismantling old unserviceable one complete all as specified and directed.
S&F in repair 32mm dia waste/flush pipe of polyethylene of low or high density or PVC. 32 mm dia, suitable for vitreous china wash hand basin including taking down old unserviceable pipe complete all as specified and directed.
S&F in repair 15mm dia Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete including taking down old rusted tap complete all as specified and directed.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F Brass chromium plated shower rose 150mm size with or without swivel joints, including fixing to steel pipe or union complete in all respect as specified.
S&F Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms)
S&F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen with plug, washers & waste incl bedding in CM 1:3 to dwarf wall or incl fixing cantilever brackets and connecting union to pipe. Over all size 915 mm x 460 mm, bowl size 410 mm x 330 mm x 160 mm.
S&F in repair Harrison curtain rails, mild steel, chromium plated including fancy type brackets, stops, rollers etc. all as specified
S&F in repairs PVC syphon with rod including PVC handle with adjustable lever (flushing kit) suitable for 10 litre capacity PVC flushing cistern complete all as specified
Taking down GI tubing 15mm bore all as specified and directed by Engineer-in-Charge.
Supply and fix GI tubing 15mm bore medium grade with all fittings fixed to wall and ceiling complete all as specified and directed.
Dismantling water tanks of capacity exc 250ltrs but n.exc 500ltrs complete
Dismantling water tanks of capacity exc 500 ltrs and not exc 1000 ltrs
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top),of capacity 500ltrs hoisted and fixed in position all as specified in SSR Part I
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top),of capacity 1000ltrs hoisted and fixed in position all as specified in SSR Part I
S&F in repairs 15 mm bore bib taps cast copper alloy with Chromium plated crutch or butterfly handle scrwed, screwed for iron pipe or for brass ferrule and fixed complete all as specified..
S&F in repair 15mm dia; Stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair 15mm dia; Stop valves, fancy type, chromium plated, with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.
VIJ ASSOCIATES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .