2597 21-09-2026

CONSTRUCTION OF CLASS ROOM UNDER DA-JGUA DRIVE FOR TRIBAL DEVELOPMENT DEPARTMENT

s.n SOR ITEMS QTY UNIT RATE AMOUNT

1 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). 210.00 sqm 7.20 1512.00

2 1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

1.1.1 In all types of soils. 142.52 cum 185.00 26366.20

3 1.6 Extra for every additional lift of 1.5 m or part thereof.

1.6.1 All types of soils 35.63 cum 26.50 944.20

4 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. 82.41 cum 65.00 5356.65

5 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 152.62 cum 371.00 56622.02

6 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 25.00 cum 2970.00 74250.00

7 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 16.00 Cum 4163.00 66608.00

8 3.3 Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto plinth level excluding cost of form work.

9 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 47.72 Cum 97.50 4652.70

10 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:

3.12.2 Thermo-Mechanically treated bars FE 500D 11729.40 kg 54.50 639252.30

11 2.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

2.1.1 Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. 247.57 sqm 139.00 34412.23

2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape 129.60 sqm 297.00 38491.20

2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 112.46 sqm 235.00 26428.10

2.1.8 Beams, lintels, cantilevers & walls 135.29 sqm 202.00 27328.58

2.1.13 Weather shade, chhajja, Cornices and mouldings 7.20 sqm 294.00 2116.80

2.1.15 Stair cases of all types excluding spiral and folded plate type, including risers and landings 26.94 sqm 212.00 5711.28

12 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand) 35.24 cum 3263.00 114988.12

13 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 35.24 cum 121.00 4264.04

14 1.22 Supplying chlorpyrifos/ Lindane emulsifiable concentrate of 20% in sealed containers including delivery as specified. 112.01 liter 208.00 23298.08

15 1.25 Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-termite treatment:(Five year service guarantee bond to be signed by contractor)

1.25.1 Surface treatment by spreading emulsion under floor, over the plinth area before laying base concrete @ 5 litres / sqm 160.14 sqm 27.50 4403.85

1.25.2 Treatment of inside of plinth masonry wall on using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall below plinth protection at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand). 52.00 meter 19.00 988.00

1.25.3 Treatment of outer side of plinth masonry wall using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall at the junction of floor at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand). 53.60 meter 13.50 723.60

16 9.16 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

9.16.2 Angle-iron frames 31.20 kg 73.50 2293.20

17 8.13 Providing and fixing flush door shutters, conforming to IS 2202 (Part 1), interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges.

8.13.2 35 mm. thick (single leaf) 5.76 sqm 1370.00 7891.20

18 8.18 Providing and fixing lipping with second class teak wood lipping on all edges of shutters.

19 8.77 Providing and fixing antique/ SS finished brass butt hinges with antique/ SS polished MS screw complete:

20 8.79 Providing and fixing antique/ SS finished brass sliding door bolt with necessary bolts, nuts and antique/ SS polished MS screw complete:

21 8.81 Providing and fixing antique/ SS finished brass tower bolts (Barrel type) with antique/ SS polished MS screw complete

22 8.84 Providing and fixing antique/ SS finished brass handles with antique/ SS polished MS screw complete:

23 8.90 Providing & fixing 150mm antique/ SS finished brass floor door stopper with rubber cushion and antique/ SS polished MS screw complete to suit the shutter thickness. 2.00 each 77.00 154.00

24 9.47 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately:

9.47.1 For fixed portion 116.48 kg 331.00 38554.88

9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 152.32 kg 338.00 51484.16

25 9.48 Extra for powder coated (minimum 50 micron) aluminium sections instead of anodized. 268.80 kg 27.00 7257.60

26 9.51 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item):

9.51.2 With float glass panes of 5 mm thickness 22.40 sqm 708.00 15859.20

27 8.56 Providing and fixing stainless steel wire mesh of average width of aperture 1.56mm with wire of dia 0.45mm to doors, windows and clerestory windows including 19x12mm teak wood beading etc. complete.

28 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 627.20 kg 67.50 42336.00

29 12.46 15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m).

12.46.1 Granite stone grey/pink 23.22 sqm 1869.00 43398.18

29 12.79 Providing and laying DOUBLE/MULTI CHARGE Iminimum 2.0 mm thick layer) VITRIFIED floor tiles With water absorption less than 0.05% and conforming to IS' 15622-2017 Of 1st quality Of approved make in all colours and shades and size mentioned below 1+/- I Omm) laid on 20rnm thick cement mortar (I cement: 4 coarse sand) including grouting the joints With Withe cement and matching pigments etc. complete

12.79.1 Size 600x6COmm thickness 9 to Iomm 128.52 sqm 1082.00 139058.64

30 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) 192.24 sqm 87.00 16724.88

31 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 213.92 sqm 91.50 19573.68

33 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 83.04 sqm 107.00 8885.28

34 11.70 Providing and making 18 mm thick cement plaster with under layer of 12mm thick cement plaster 1:5 (1 cement : 5 fine sand) finished with a top layer of 6mm thick cement plaster 1:3 (1 cement : 3 fine sand). 206.20 sqm 163.00 33610.60

35 11.41 Providing and fixing chicken mesh weighting not less than 250 gms/ sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height. 106.63 sqm 86.00 9170.18

35 11.32 Providing and making 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand) per cm width:

11.32.4 Drip course 90.00 meter 3.60 324.00

36 14.13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even. 695.40 sqm 94.50 65715.30

37 14.12 Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete. 695.40 sqm 23.00 15994.20

38 14.1 Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade.

14.10.1 On new work (two or more coats) 275.28 sqm 44.50 12249.96

39 14.15 Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:

14.15.1 On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 206.20 sqm 56.00 11547.20

40 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.2 Premium synthetic enamel paint 34.40 sqm 47.00 1616.80

41 10.41 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 12.00 sqm 68.00 816.00

42 11.5 Neat Cement punning. 7.20 sqm 33.00 237.60

43 10.61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 124.80 sqm 658.00 82118.40

TOTAL(A) 2137190.47

CONSTRUCTION OF CLASS ROOM UNDER DA-JGUA DRIVE FOR TRIBAL DEVELOPMENT DEPARTMENT

s.n SOR ITEMS QTY UNIT RATE AMOUNT

1 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 1.02 Cum 4163.00 4246.26

2 3.3 Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto plinth level excluding cost of form work.

3 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 24.24 Cum 195.00 4726.80

4 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:

3.12.2 Thermo-Mechanically treated bars FE 500D 2904.90 kg 54.50 158317.05

5 2.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape 12.20 sqm 297.00 3623.40

2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 94.50 sqm 235.00 22207.50

2.1.8 Beams, lintels, cantilevers & walls 57.18 sqm 202.00 11550.36

2.1.13 Weather shade, chhajja, Cornices and mouldings 4.32 sqm 294.00 1270.08

2.1.15 Stair cases of all types excluding spiral and folded plate type, including risers and landings 26.94 sqm 230.00 6196.20

6 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand) 26.18 cum 3263.00 85425.34

7 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: 26.18 cum 242.00 6335.56

8 9.16 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

9.16.2 Angle-iron frames 15.60 kg 73.50 1146.60

9 8.13 Providing and fixing flush door shutters, conforming to IS 2202 (Part 1), interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges.

8.13.2 35 mm. thick (single leaf) 2.88 sqm 1370.00 3945.60

10 8.18 Providing and fixing lipping with second class teak wood lipping on all edges of shutters.

11 8.132 Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete.

12 8.137 Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete.

13 8.139 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete.

14 8.140 Providing and fixing antique/ SS finished brass handles with antique/ SS polished MS screw complete:

15 8.143 Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete.

16 9.47 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately:

9.47.1 For fixed portion 44.93 kg 331.00 14871.83

9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 58.76 kg 338.00 19860.88

17 9.51 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item):

9.51.2 With float glass panes of 5 mm thickness 8.64 sqm 708.00 6117.12

18 8.56 Providing and fixing stainless steel wire mesh of average width of aperture 1.56mm with wire of dia 0.45mm to doors, windows and clerestory windows including 19x12mm teak wood beading etc. complete. 4.32 sqm 649.00 2803.68

19 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. 241.92 kg 67.50 16329.60

20 12.79 Providing and laying DOUBLE/MULTI CHARGE Iminimum 2.0 mm thick layer) VITRIFIED floor tiles With water absorption less than 0.05% and conforming to IS' 15622-2017 Of 1st quality Of approved make in all colours and shades and size mentioned below 1+/- I Omm) laid on 20rnm thick cement mortar (I cement: 4 coarse sand) including grouting the joints With Withe cement and matching pigments etc. complete

12.79.1 Size 600x6COmm thickness 9 to Iomm 58.60 sqm 1082.00 63405.2

21 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) 118.08 sqm 87.00 10272.96

22 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 130.36 sqm 91.50 11927.94

23 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) 203.52 sqm 107.00 21776.64

24 11.70 Providing and making 18 mm thick cement plaster with under layer of 12mm thick cement plaster 1:5 (1 cement : 5 fine sand) finished with a top layer of 6mm thick cement plaster 1:3 (1 cement : 3 fine sand). 175.60 sqm 163.00 28622.80

25 11.32 Providing and making 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand) per cm width:

11.32.4 Drip course 32.40 meter 3.60 116.64

26 14.13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even. 627.56 sqm 94.50 59304.42

27 14.12 Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete. 627.56 sqm 23.00 14433.88

28 14.1 Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade.

14.10.1 On new work (two or more coats) 451.96 sqm 44.50 20112.22

29 14.15 Painting exterior surface with ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:

14.15.1 On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 175.60 sqm 56.00 9833.60

30 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.2 Premium synthetic enamel paint 15.60 sqm 47.00 733.20

31 4.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of following applications including surface preparation: i) 1st layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. ii) 2nd layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. iii) 3rdlayer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with coarse sand @ 1.289 kg/sqm and water proofing cement compound @ 0.07 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. iv) 4th and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured. 71.77 sqm 283.00 20310.91

TOTAL(B) 727330.91

TOTAL (A+B) 2864521.38