Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹9.7 LAccepted-AOC 1072 PADIMAR INDIRA MARKET BALCO VILLAGE TOWN KORBA CITY KORBA KORBA CHHATTISGARH 495684 INDIA | KORBA | CHHATTISGARH | 495684 | L-1 | Accepted-AOC The work is awarded to L-1 bidder | |
| 2 | Rejected-Technical MIG 80 R P NAGAR KORBA CG | KORBA | KORBA | CHHATTISGARH | - | Rejected-Technical DUE TO L- 5 BIDDER | |
| 3 | Rejected-Technical BELTIKARI BASAHAT PALI ROAD DIPKA DIST KORBA CG | DIPKA | KORBA | CHHATTISGARH | - | Rejected-Technical DUE TO L- 3 BIDDER | |
| 4 | Rejected-Technical DIPKA KATGHORA ROAD DIPKA DIPKA KORBA CHHATTISGARH 495452 | KORBA | CHHATTISGARH | 495452 | - | Rejected-Technical DUE TO L-2 BIDDER | |
| 5 | Rejected-Technical DEORIA PATRATU BHURKUNDA RAMGRAH DIST RAMGRAH JHARKHAND | RAMGRAH | RAMGARH | JHARKHAND | - | Rejected-Technical DUE TO L-4 BIDDER |
Tender Value
₹19.0 L
EMD Value
₹23,800
Closing Date
3 Sept 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GM CIVIL GEVRA AREA
Office of the General Manager , SECL, Gevra Area, PO Gevra Project, Distt.- Korba (CG)Contact No. 9425534061
Repair and Maintenance works for community stage near State Bank, Urja Nagar of Gevra Area
2022_SECL_254007_1
SECL /GA/ GM(C) / ETN/ 22-23 /94 dtd. 20.08.22
Open Tender
Civil Works - Others
Item Rate
60 days
Gevra Area
Please refer Tender documents.
3 documents required · 3 mandatory
₹23,800
22 Dec 2022
23 Aug 2022
5 Sept 2022
23 Aug 2022
3 Sept 2022
24 Aug 2022
23 Aug 2022 - 27 Aug 2022
120 days
Amount
Item Description/ Heading
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet
Brick work in cement mortar 1:6 (1 cement 6 coarse sand) with fly ash bricks of size 230x110x70 mm and having crushing strength of 75 Kgs/Sqcm to 100 Kgs/Sqcm as per the specification in : superstructure above plinth level upto floor V level
12 mm cement plaster: 1:6 (1 cement : 6 fine sand)
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)
Extra for providing and fixing wind ties of 40x 6 mm flat iron section.
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
White washing with lime to give an even shade : Old work (two or more coats)
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
Total impact of GST for the purpose of CTC
Rakesh Kumar Enterprises
GOVIND KASHYAP
SUNIL KUMAR
BHAKULAL SAHU
stage.html
html • 0.04 MB
techsummary_262566.pdf
PDF • 1.49 MB
finsummary_262566.pdf
PDF • 1.49 MB
LOA996GRACEFULCONSTRUCTION.pdf
PDF • 3.19 MB
finance_262566.pdf
PDF • 0.19 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .