SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF OPEN GYM EQUIPMENT COMPLETE WITH FOUNDATION WORKS, ANCHORING AND ALLIED CIVIL WORKS

Seating and Satanding twister DIMENSIONS : 1700mm(L)x540mm(W)x1250mm(H). (ii). SAFE AREA : 3Mtr X 1Mtr. (iii).Seating & Standing Twister equipment made from ''B'' Class G.I pipe of different NB, NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters (iv). The Center pipe is of 100mm NB made from ''B'' Class G.I Round Pipe. (v). The MS round plate of Dia 250mm and 10mm thickness is welded at bottom. (vi). Handle and Bottom sleeve pipe of 125mm OD with thickness 5mm provided for easy assembly, replacement and maintenance. (vii).The Bottom frame of the Seating & Standing twister is of 32 NB, 50 NB, and 25 NB made from "B" class G.I pipe. (viii). The handle frame of Seating & Standing Twister is 25 NB & Foot resting frame of seating side is made from "B" class G.I pipe of 25mm NB. (ix). The foundation used for fixing is a structureand made from center pipe of G.I of 80 NB "B"class, Welded with M.S Round Plate of size Dia 250mm and 10mm Thickness. Main pipe supported with 25mm x 25mm M.S anglesof 3mm thickness and 20mm x 40mm CRCA square pipe of 3mm thickness. (x). The twister plate fitted on the bottom frame is made up of Injection Moulded plastic LLDPE/HDPE and Mounted on M.S Round Plate of size Dia 300mm and 10mm Thickness. (xi). Closing Caps are made up of Injection Moulded Plastic LLDPE/HDPE. (xii). The Pins used are made up Dia 35mm SAE 8620 bright material. (xiii). The bearing used are of "6205zz" permanent lubricated sealed bearing of reputed brand. (xiv). High tensile steel with galvanized nuts & bolts are used for assembly. (xv). The powder coating is done by pure Polyester powder of Berger Piant with 60 to 70 micron thickness. (xvi). Installtion including with civil work.

Sky Walker (i). DIMENSIONS : 1720mm(L)x630mm(W)x1750mm(H). (ii). SAFE AREA : 2.7Mtr X 1.6Mtr. (iii). Sky Wlaker equipment made from ''B'' Class G.I pipe of different NB, NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters (iv). The Main frame pipe is of 80mm NB made from ''B'' Class G.I Material which is bend at the radius of 250mm. (v). The leg movement frame is of 50mm x 50mm and 3mm thick CRC square pipe. (vi). sleeve are made up of 100mm OD M.S pipe with thickness 5mm. this results in easy replacement of berings, pins and handle. (vii). The handle frame is of 25mm NB made from "B" class G.I pipe. (viii). The foundation used for fixing is a structureand made from center pipe of G.I of 80 NB "B"class, Welded with M.S Round Plate of size Dia 250mm and 10mm Thickness. Main pipe supported with 25mm x 25mm M.S anglesof 3mm thickness and 20mm x 40mm CRCA square pipe of 3mm thickness. two foundations are provided for rigid support. (ix). The footrests made from Injection Moulded plastic LLDPE/HDPE. (x). Closing Caps are made up of Injection Moulded Plastic LLDPE/HDPE. (xi). The Pins used are made up Dia 25mm SAE 8620 bright material. Pins are fixed at the outer end with M8 grub screws and Dia 8nn SS ball. (xii). The bearing used are of "6205zz" permanent lubricated sealed bearing of reputed brand. (xiii). High tensile steel with galvanized nuts & bolts are used for assembly. (xiv). The cerclips used for assembly are of A24 type. (xv). The powder coating is done by pure Polyester powder of Berger Piant with 60 to 70 micron thickness. (xvi). Installtion including with civil work.

Quad Spinner QUAD SPINNER (i). DIMENSIONS : 1500mm(L)x 1500mm(W)x 1800mm(H). (ii). SAFE AREA : 3Mtr X 1Mtr. (iii). Quad Spinner Four Wheeler equipment made from ''B'' Class G.I pipe of different NB, NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. (iv). The Center pipe is of 100mm NB made from ''B'' Class G.I Round Pipe. (v). The bottom welded with support of MS round plate of Dia 250mm and 10mm thickness. (vi). The handle movement frame is of 25mm NB made from "B" Class G.I pipe. (vii). The foundation used for fixing is a structureand made from center pipe of G.I of 80 NB "B"class, Welded with M.S Round Plate of size Dia 250mm and 10mm Thickness. Main pipe supported with 25mm x 25mm M.S anglesof 3mm thickness and 20mm x 40mm CRCA square pipe of 3mm thickness. (viii). Foundation cover Closing Cap is made from Injection Moulded Plastic LLDPE/HDPE. (ix). Closing Caps are made up of Injection Moulded Plastic LLDPE/HDPE. (x). The Pins used are made up Dia 25mm SAE 8620 bright material. (xi). The bearing used are of "6201zz" & "6205zz" permanent lubricated sealed bearing of reputed brand. (xii). High tensile steel with galvanized nuts & bolts are used for assembly. (xiii). The cerclips used for assembly are of A24 type. (xiv). The nylon bush is used for handle knob, (xv). The powder coating is done by pure Polyester powder of Berger Piant with 60 to 70 micron thickness. (xvi). Installtion including with civil work.

Back Extension DIMENSIONS : 1500mm(L) x 600mm(W) x 1350(H). (ii). SAFE AREA : 2.4 Mtr X 1.7 Mtr. (iii). Back Extension equipment made from ''B'' Class G.I pipe of different NB, NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters (iv). 50mm NB:- Main Frame. (v). 32mm NB:- Footrest support frame, Foundation hole-pass. (vi). 25mm NB:- Handle Frame. (vii). MS Angle 23 x 23 x 1.8mm :- Foundation support frame. (viii). MS Sheet of size 330 x 330 x 1.8mm :- Seat. (ix). MS plate of 245 x 113 x 2.8mm :- Footrest support plate. (x). Nut & Bolts :- High tensil steel with galvanised nut & bolts are used. (xi). HDPE/LLDPE Plastic:- Footrest. (xii). Handle grips :- Handle grips are made up of high quality rubber material. (xv). Powder coating :- The powder coating is done with pure Polyester powder of Berger Piant with 60 to 70 micron thickness. (xvi). Installtion including with civil work.

Chest Cum Seated Puller (i). DIMENSIONS : 2000mm(L)x710mm(W)x2200mm(H). (ii). SAFE AREA : 3Mtr x 1.7Mtr. (iii). Chest press cum seated puller equipment made from ''B'' Class G.I pipe of different NB, NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters (iv). The Center pipe is of 100mm NB made from ''B'' Class G.I Round Pipe. (v). The bottom welded with support of MS round plate of Dia 250mm and 10mm thickness. (vi). The connecting pipe are made up from 25NB "B" Class G.I. pipe. (vii). The handle frame is made up from 32NB made from "B" Class G.I pipe. (viii). The build structure bushes are used which are made from seamless pipe of 50mm OD and thickness as well as 50mm diameter soild bar is used. (ix). The foundation used for fixing is a structureand made from center pipe of G.I of 80 NB "B"class, Welded with M.S Round Plate of size Dia 250mm and 10mm Thickness. Main pipe supported with 25mm x 25mm M.S anglesof 3mm thickness and 20mm x 40mm CRCA square pipe of 3mm thickness. (x). The seats and back rest are fitted on outer frames are made up of MS Sheet of size 330mm x 300mm x 2mm thickness and deep drawn and pressed in tools and dies to have uniform raduis of 20mm with no sharp edges. (xi). Foundation cover Closing Cap is made from Injection Moulded Plastic LLDPE/HDPE.. (xii). Closing Caps are made up of Injection Moulded Plastic LLDPE/HDPE. (xiii). The Pins used are made up Dia 25mm SAE 8620 bright material. (xiv). The bearing used are of "6205zz" & "6203zz" permanent lubricated sealed bearing of reputed brand. (xv). High tensile steel with galvanized nuts & bolts are used for assembly. (xvi). The cerclips used for locking is made up of A24 & A16. (xvii). The powder coating is done by pure Polyester powder of Berger Piant with 60 to 70 micron thickness. (xviii).Installtion including with civil work.

Leg Press DIMENSIONS : 1840mm(L)x360mm(W)x1560mm(H). (ii). SAFE AREA : 2.8 Mtr x 1.4 Mtr. (iii). Leg Press equipment made from ''B'' Class G.I pipe of different NB, NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters (iv). The Center pipe is of 100mm NB made from ''B'' Class G.I Round Pipe. (v). The Sleeve frame is of 100mm OD and of MS Seamless pipe with thickness 5mm. This sleeve can be disassembled from main frame. (vi). The bottom support of MS round plate of Dia 250mm and 10mm thickness. (vii). The remaining outer frame is of 32NB made from "B" c;ass G.I pipe. (viii). The foundation used for fixing is a structureand made from center pipe of G.I of 80 NB "B"class, Welded with M.S Round Plate of size Dia 250mm and 10mm Thickness. Main pipe supported with 25mm x 25mm M.S anglesof 3mm thickness and 20mm x 40mm CRCA square pipe of 3mm thickness. (ix). The seats and back rest are fitted on outer frames are made up of MS Sheet of size 330mm x 300mm x 2mm thickness and deep drawn and pressed in tools and dies to have uniform raduis of 20mm with no sharp edges. (x). The footrests made from Injection Moulded plastic LLDPE/HDPE with the support of 310mm x 130mm and 3mm thick MS Plate. (xi). The frame of footrests made up of 25 NB "B" class G.I pipe. (xii). Foundation cover Closing Cap is made from Injection Moulded Plastic LLDPE/HDPE. (xiii). Closing Caps are made up of Injection Moulded Plastic LLDPE/HDPE. (xiv). The Pins used are made up Dia 25mm SAE 8620 bright material. (xv). The bearing used are of "6205zz" permanent lubricated sealed bearing of reputed brand. (xvi). High tensile steel with galvanized nuts & bolts are used for assembly. (xvii). The powder coating is done by pure Polyester powder of Berger Piant with 60 to 70 micron thickness. (xviii). Installtion including with civil work.

Shoulder Builder (i). DIMENSIONS : 900mm(L)x900mm(W)x1580mm(H). (ii). SAFE AREA : 1.9 Mtr x 1.9 Mtr. (iii). Shoulder Builder equipment made from ''B'' Class G.I pipe of different NB, NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters (iv). The Center pipe is of 100mm NB made from ''B'' Class G.I Round Pipe and bottom support of MS round plate of 250mm Dia and 10mm thickness. (v). Sleeve provided is of MS Seamless pipe outer diameter 125mm with thickness 5mm provided. (vi). The handle movement frame is of 25mm NB made from "B" class G.I Pipe. (viii). The foundation used for fixing is a structureand made from center pipe of G.I of 80 NB "B"class, Welded with M.S Round Plate of size Dia 250mm and 10mm Thickness. Main pipe supported with 25mm x 25mm M.S anglesof 3mm thickness and 20mm x 40mm CRCA square pipe of 3mm thickness. (viii). Closing Caps are made up of Injection Moulded Plastic LLDPE/HDPE. (ix). The Pins used are made up Dia 25mm SAE 8620 bright material. (x). The bearing used are of "6205zz" permanent lubricated sealed bearing of reputed brand. (xi). High tensile steel with galvanized nuts & bolts are used for assembly. (xiii). The cerclips used for assembly are of A24 type. (xiii). The nylon bush is used for handle knob, (xiv). The powder coating is done by pure Polyester powder of Berger Piant with 60 to 70 micron thickness. (xv). Foundation cover Closing Cap is made from Injection Moulded Plastic LLDPE/HDPE. (xvi). Installtion including with civil work.

SURF BOARD (i). DIMENSIONS : 910mm(L)x860mm(W)x1400mm(H). (ii). SAFE AREA : 1.39 Mtr x 1.27 Mtr. (iii). Surf Board equipment made from ''B'' Class G.I pipe of different NB, NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters (iv). The Center pipe is of 100mm NB made from ''B'' Class G.I Pipe. (v). The Sleeve frame is of 125mm OD and of MS Seamless pipe with thickness 5mm and bolted to main frame with M10 SS bolts. (vi). The bottom support welded of MS plate of OD 250mm and 10mm thickness. (vii). The handle movement frame is of 25mm NB made from "B" class G.I Pipe. (viii). The paddle frame is of 50NB made from "B" class G.I pipe supported with 70x8mm bend MS flat and can be replaceable. (ix). The foundation used for fixing is a structureand made from center pipe of G.I of 80 NB "B"class, Welded with M.S Round Plate of size Dia 250mm and 10mm Thickness. Main pipe supported with 25mm x 25mm M.S anglesof 3mm thickness and 20mm x 40mm CRCA square pipe of 3mm thickness. (x). Bushes are used 70m OD with 5mm thickness is used. (xi)The footrest made from InjectionMoulded Plastic LLDPE/HDPE. (xii). Footrest support 200mm x 250mm with 3mm thickness MS plate used. (xiii). Closing Caps are made up of Injection Moulded Plastic LLDPE/HDPE. (xiv). The Pins used are made up Dia 35mm SAE 8620 bright material. (xv). The bearing used are of "6207zz" permanent lubricated sealed bearing of reputed brand. (xvi). High tensile steel with galvanized nuts & bolts are used for assembly. (xvii). The cerclips used for assembly are of A34 type. (xviii). The powder coating is done by pure Polyester powder of Berger Piant with 60 to 70 micron thickness.

SIT UP BOARD (i). DIMENSIONS : 1820mm(L)x430mm(W)x580mm(H). (ii). SAFE AREA : 2.8 Mtr x 0.6 Mtr. (iii). Sit UP Board equipment made from ''B'' Class G.I pipe of different NB, NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters (iv). The main frame is of 50mm NB made from "B" class G.I pipe supportedwith the MS round plate of OD 250 and 10mm thickness. (v). Fiber reinforced Plastic sheet of 3mm thickness is Bounded on 25mm NB "B" calss G.I pipe of maine frame. (vi). The base support of the sit up board is made 40NB "B" class G.I pipe. (vii). The foundation used for fixing is a structureand made from center pipe of G.I of 80 NB "B"class, Welded with M.S Round Plate of size Dia 250mm and 10mm Thickness. Main pipe supported with 25mm x 25mm M.S anglesof 3mm thickness and 20mm x 40mm CRCA square pipe of 3mm thickness. (viii). The powder coating is done by pure Polyester powder of Berger Piant with 60 to 70 micron thickness. (ix). Installtion including with civil work.

Cycle DIMENSIONS : 1570mm(L)x570mm(W)x900mm(H). (ii). SAFE AREA : 2.5 Mtr x 1.5 Mtr. (iii). Cycle equipment made from ''B'' Class G.I pipe of different NB, NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters. (iv). The main frame is of 25mm NB made from "B" class G.I pipe. (v). MS round plate of OD 300mm and 10mm thickness used to from a paddle assembly. (vi). The handle frame is of 25NB made from "B" class G.I pipe. (vii). The seats and back rests are fitted on the outer frames are made up of MS sheet of size 330 x 300mm and 2mm thickness and deep drawn and pressed in tools and dies to have uniform raduis of 20mm with no sharp edges. (viii). The foundation used for fixing is a structureand made from center pipe of G.I of 80 NB "B"class, Welded with M.S Round Plate of size Dia 250mm and 10mm Thickness. Main pipe supported with 25mm x 25mm M.S anglesof 3mm thickness and 20mm x 40mm CRCA square pipe of 3mm thickness. (ix). Closing Caps are made up of Injection Moulded Plastic LLDPE/HDPE. (x). Pins used of Diameter 25mm are made up from SAE 8620 bright material. (xi). Pins used of Diameter 13mm are made up from EN8 material with CRAC pipe 20x20mm of thickness 3mm for paddle assembly. (xii). The bearing used are 6001zz & 6205zz permanent lubricated sealed bearing of reputed brand. (xiii). High tensile steel with galvanized nuts & bolts are used for assembly. (xiv). The cerclips used for assembly are of A24 type. (xv). The powder coating is done by pure Polyester powder of Berger Piant with 60 to 70 micron thickness. (xvi). Installtion including with civil work.