Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAccepted-AOC 08 PINK ENCLAVE MAHESH NAGAR BALAJI VIHAR GOPALPURA JAIPUR RAJASTHAN 302015 INDIA | JAIPUR | RAJASTHAN | 302015 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹32.6 L+₹6.9 L (27.1%)Rejected-Finance H NO 154 VILLAGE SHIKARPUR PO NAJAFGARH NEW DELHI 110043 | WEST | DELHI | 110043 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹45.6 L+₹20.0 L (78.0%)Rejected-Finance N A | NA | NA | 121004 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹48.0 L+₹22.4 L (87.4%)Rejected-Finance 1 204 LOWER GROUND FLOOR SADAR BAZAR DELHI CANTT 110010 | NEW DELHI | DELHI | 110010 | L4 | Rejected-Finance Being other than lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
17 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
REPAIR TO JOINERY TO INCL REPLACEMENT/REPAIR OF DOORS, WINDOWS, CUPBOARDS, KITCHEN CUPBOARD IN THE AOR OF AGE B/R-II UNDER GE (EAST) DELHI CANTT-10
2022_MES_537761_1
GE/DE-17/2022-23
Open Tender
Coal Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹80,000
31 Oct 2022
13 Jul 2022
19 Aug 2022
13 Jul 2022
17 Aug 2022
3 Aug 2022
Amount
Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed
All as per Srl item No 1 above but size of opening exc. 1.5 Sqmtr but not exc. 4 Sqmtr
Taking down shutters of any description exc 1.00 sqm & nexc 2 sqm each.
S&F Plain , solid , straight chowkhats and frames of 2nd class hard wood, wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed.
S&F MS framed work as in door or gates of angle or other section with gusset plates,rail, braces,etc and similar work incl primer conforming to Fe 410w grade-250) quality 'B' complete.
S&F Pressed steel frames size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete,all as specified and directed.
All same as per item No.06 above but size 125x60mm
S&F 35mm thick 2nd class hard wood glazed and sekeleton shutter's open rebated and prepared to receive glass, guage etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, gauge etc size of marker of shutters as per SSR Part-I sec-8 clause 8.4(a).
S&F 35mm thick flush shutter, solid core construction, with block board core and plywood face panel commercial type on both sides.
S&F 2nd class HW 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers to chowkhat.
Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.
Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be oulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.
S&F 100mm long butt Hinges, medium weight, cold rolled mild steel fixef in repair complete.
S&F 300mm long aluminum alloy, anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy.
S&F 150mm long aluminum anodized barrel tower bolt of cast aluminiun alloy section.
S&F Aluminium handles, 150mm size cast type anodised complete.
S&F for mild steel 300 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete
S&F Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring overall length of cover plate 140mm.
M&L Resecuring or Easing and adjusting , without taking down shutters of doors/windows for easy opening /closing ,tightening of hinges and changing its position or adjustment of tower bolts/sliding bolts etc area not exc 2 sqm each complete all as specified and directed.
S&F Aluminium alloy powder coated (50 micron) anodized door frame of section 100mm x 44 mm x 2 mm thick, door shutter of aluminium section of size 85 mm x 44 mm x 2 mm thick, top rail and both styles of size 100 mm x 44 mm x 2 mm thick, lock rail and bottom rail of size 115 mm x 44 mm x 2mm thick incl aluminium anodized snap beading and rubber packing & 5.5 mm thick colour designer glass incl 200 mm long tower aluminium anodised bolt-2 Nos, 200 mm long aluminium anodised Alm handle -02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock (Make :- Godrej), & double action floor door spring(Harrison/Samrat) heavy duty suitable for 1 m wide shutter for each leaf, complete all as specified and as directed.
S&F powder coated three track aluminium (glazed/ gauged) window shutters sliding type incl 5.5mm thick glass or stainless steel wiremesh, without sash bar aluminium saction weighting 0.55 Kg per mtr including frame necessary joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws including fittings complete all as per direction of Engr-in-charge.
S&F powder coated aluminium window and ventilator shutters, side hung type with out sash bars, aluminium sections weighing 0.55 Kg/m including frame and necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No.) hinges type B-21 100 mm long (2No.) ,aluminium tower bolt 100 mm long (2No.),suitable handle (1 No.) complete all as specified.
S&Faluminium anodized grills with 6mm x 5mm aluminium section having square gap of 100mm with fixing arrangement complete all as specified and directed
S&F 25 mm thick flush shutter solid core construction with block board core and ply wood face panel commerical type on both side as in shutter of cupboard/kitchen cup board/loft board.
M&L box type Steel windows with double shutters (inside for wiremesh & out side for glass), hinges, steel handle, tower bolt and steel peg stay complete with glazing bars dovetailed or welded .WIRE MESH –Stainless steel wire mesh of 0.3 mm nominal dia of wire and average width of aperature 1.40mm. Grills window shall be provided with grill made of 10mm square MS bars welded to 12mmx6mm thick MS plate . Distance between bars should not be more than 12cm c/c. Total grill unit shall be enamel painted and fixed to window frame with screw . Note: The glazed/Guaged shutter including guard bars shall be measure once i.e. as per area of opening. No separate payment of separate shutter i.e. glazed and fly proof and guard bars shall be made. Area of shutter shall be the area of opening. The rate quoted by the contractor is deemed to inclusive two coat of paint over a coat of primer of all aspects incl all fitting,glass,wire mesh,guard bar , as specified in Drg No CEDZ/TD/289 sheet 1 R/2 and 2R/2.
Hacking out old brocken glass ( any thickness , size , quality or description ) from wooden/metal frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads
S&F 4mm thick Figured glass, pinhead type with oil putty in squares n exc 0.5 sq. m each pan complete all as specified.
S&F stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.
S&F in repair stainless steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.
Providing and fixing factory made modular kitchen cabinets and cupboard shutter with 18mm thick one side decorative and other side balancing lamination factory pressed HDHMR Board of Action Tesa and equivalent including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc all complete as per direction of Engineer-in-Charge.
S&F in repair for rack & cupboards for kitchen and wardrobe with 18mm thick both sides balancing lamination factory made HDHMR of Action Tesa or equivalent approved brand for boxes, shelves, rack, almirah, cubpard and drawer etc incl necessary nails, screw etc complete as per direction of Engr-in-Charge.
S&F for L- Bihari hinges,Stainless steel, 15 crank/degree, with nickel finish colour, all completed as specified and directed
S&F in repair Magnet ball catcher brass body with 8mm dia steel ball of approved qualities complete all as specified
S&F in repair 150mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws
S&F in repair 40 mm dia. cup boards knobs fixed with nut , screw and washer of mild steel , bright finished
M&L two coats of synthetic enamel painting on new steel surfaces over one coat of red oxide primer of any description over 10 cm in width or girth not otherwise described including prepration of surfaces
M&L two coats of synthetic enamel painting on new wooden surfaces over one coat of pink primer of any description over 10 cm in width or girth not otherwise described inlcuding preparation of surfaces.
Taking down cement or cement lime plaster on brick walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface and finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed
M&L Rendering 5mm thick on concrete surfaces in CM 1:4 as on ceiling all as specified and as directed.
M&L for two coats of cement base paint on plaster surfaces of wall over a coat of primer including prepration of surface complete.
M&L for applying two coats of oil bound distemper over one coat of alkali resistance priming paint on newly plastered surfaces of wall complete all as specified and directed.
M&L for applying two coats of oil bound distemper over one coat of alkali resistance priming paint on new surfaces of ceiling incl preparation of surfaces.
S&F in repairs Drapery rod 25mm dia aluminium, powder coated teak wood texture finish 1 mm thick, with end bulbs as reqd and fixing brackets.
Dismantling wrought iron or mild steel work of any description complete all as specified
M&L for repair to existing steel rolling exc. 4.50Sqm but n. exc 8.00Sqm shutters by repairing/welding/oiling/greasing to anchoring rod,springs,side guide channel etc incl dismantling existing steel rolling shutters of any width and refixing after making serviceable after adjusting springs including two coats of paint complete all as spd and directed.
M&L for repair to existing in built steel cup board, door, locks, hinges incl necessary welding, drilling and making the locker serviceable all as per existing pattern as directed by Engineer-in-Charge
M&L for repair to existing steel window/door by welding/replacing hinges/handle or removing the steel window shutters from the frame and re-fixing after making serviceable all as specified
S&F 1.25mm thick plain black steel sheet in hearths; covering to door shutters; covering to door chowkats (frames);chullah hoods; water tanks; water troughs;ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required incl priming complete all as specified and directed.
M&L Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws including dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings, complete all as specified and as directed.
M & L framed work such as grills, grating,gate etc with ends of bars shouldered or riveted or forged into spikes framed guard bars and similar work conforming to Fe - 290-0 grade E-165.
S&F in repair 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black.
S&F in repair aluminium (die cast) body door closer hydraulically regulated designation No 2 universal type suitable for door shutter of 701 to 851mm in width and of weight between 36 to 60 kg.
Demolition of brick work built in cement mortar in any description and position complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks straight or curved on plan to any radious in half brick thick wall built in CM 1:4 complete all as specified and directed.
S&F Mild steel TMT bars of 10 mm dia and over cut to length bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All same as per item No 61 here-in-before but 5mm and over upto and including 10mm dia in stirrups, spacers and binders
M&L for providing reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in kitchen slab, Chajjas, lintels complete all as specified and directed.
Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing rubbish of the premises complete all as specified and directed by Engineer-in-Charge.
M&L Coloured ceramic rectified tiles 300x450 x 7 to 8mm thick, as in vertical surfaces of wall such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in CM 1:4 complete all as specified.
M&L Coloured ceramic rectified tiles 600mm x 600mm x10 mm thick (Double charge) , joint free as in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L non skid ceramic coloured floor tiles 400mm x 400mm x 7-8mm thick (Double charges) as in floors, set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including of 15 mm thick bedding layer in cement mortar 1:4, complete all as specified and as directed.
S&F in repair stainless steel sink AISI 316 grade without drainage board of 1 mm thick kitchen or laboratory with plug , washer and waste, 15mm bore brass Chromium plated sink mixer for mixing hot and cold water, bedding in cement morter to dwarf wall or fixing cantilever brackets including CP Waste fitting 30/40mm, PVC waste pipe 30/40mm and connecting union to pipe overall size495mmx 420mm bowl size 410mm x330mm x160mm etc compete all as specified and directed.
S&F in repair stainless steel kitchen plate rack size 750 x 900x250 mm deep made out of 1mm thick sheet including fitting arrangement complete. Make- Maharaja/Nirali/Prayag
Demolition of cement concrete (unreinforced) Concrete of any description and in any position not otherwise specifically provided .
M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate, as in sub base to receive topping layer finished even and rough, complete all as specified and as directed.
M&L for glossy finish chequered cement concrete tiles 30cm x 30cm x 25mm thick in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 20 mm thick screed bed in cement mortar in (1:6) complete all as specified and as directed by Engr-in-charge.
M&L in repair for aluminium anodised snap grid frame work of size 605x605mm for false ceiling with hanging arrangement of 6mm dia G .I ( u p to 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size and 60mm long and expension hold fastners 12.50mm dia 40mm long complete all as specified and directed.
M&L in repair for Non asbestos 4mm thick fibre cement building boards fixed or laid / inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping complete all as specified and directed.
S&F curtain rod/ rail with stainless steel rod fancy type 25 mm dia including bracket and fancy type lattoo, etc complete all as specified and directed.
M/s Shubh Enterprises
Vipul Construction
LAXMI GROUP
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .