Misc B/R works at CWE (U), GE (U) W/S, GE (U) E/S, AGE (I) (U) B/R and HQ CEDZ JCOs/ORs mess and single living accn area under AGE(I)(U) B/R Delhi cantt-10

Amount

Repair to existing in built steel/wooden/PVC cup board, locks, hinges incl necessary welding and making the lock/steel, PVC cup boards complete serviceable all as per existing pattern as directed by Engineer-in-Charge including provision of duplicate keys as required.

Resecuring or easing and adjusting shutters of any description not exceeding 1 sqm each without taking down shutter of any desciption compelte all as specified.

Taking down shutter of any description exc 1.0 sq.m but n exc 2 sq.m each and after repair the shutter refixing in same opening complete all as specified.

Taking down shutter of any description exc 2 sq.m each and after repair the shutter refixing in same opening complete all as specified.

Taking down old aluminum door and refixing in same opening after reparing to damaged/loosened rail sections, tightening of scerws,reparing/replacment of locking arragment, repair and replacemnt of glass beading and repairing to existing door closer etc making door in servicealbe condiotion complete.

S&F in repair and hasp & staple 150mm aluminium anodised complete all as specified and directed.

S&F in repair 150mm aluminium handles, cast type anodised complete all as specified and directed.

S&F in repair 125mm aluminium handles, cast type anodised complete all as specified and directed.

S&F in repair 200mm aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F in repair 150 mm aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F in repair 300mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy fixed complete all as specified and directed.

S&F 3 mm thick , sheet glass ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 sqm in each pane including hacking out glass old broken (any thickness), quailty or description from wooden/steel frames, stone brick, concrete surrounding, glazed with oil putty or fixed with beads etc. complete all as speciifed and directed.

S&F in repair for 4.8mm thick sheet glass/frosted ordinary quality in square exc 0.50 sqm in each pane including hacking out glass old broken (any thickness), quality or description from wooden/steel/aluminium frame, stone brick, concrete surrounding, glazed with oil putty or fixed with beads etc complete all as specified and directed.

S&F as in repair floor door stopper 140mm of aluminium alloy body and tongue anodised, with hard drawn steel spring fixed and complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Taking down chowkats exc 1.5sqm and n.exc 4 sqm each with shutters (without taking off shutters from the chowkats or frames)

- Ditto - same as above item No-16 but n.exc 1.5 sqm

Taking down shutters exe 1sqm and n exe 2 sqm each.

S&F of 2nd class HW plain, solid, straight chowkats and frames,wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S&F of 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type of both side.

M&L for 35mm thick 2nd Class Hard Wood as glazed and skelton shutters open rebated and prepared to receive glass, gauze etc, edges of forming plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters with sash bars all as specified in SSR Pt-I

M&L for solid PVC moulded door shutter 28 to 30 mm thick with wood free EPS (Stiles) with 2,4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the both face, supplying and fixing in frame at site as per specication and aporved by GE etc complated all as specified and directed.

Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixing in existing opening including single side prelam PVC Sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet necessary hold fast and concerte all as specified and directed.

S&F of hold fasts and similar small articles conforming to Fe 410-0or 310-3.

S&F of 4mm thick glass sheet ordinary quality plain/frosted on one side, n exc 0.5Sqm in each pane,fixed to Aluminium windows.

S&F in 100mm long butt hinges medium weight stainless steel with ISI mark.

S&F of Aluminum alloy anodized Aldrop bolt 300mm long with hasp and staple and fixing bolts.

S&F of Aluminum anodized barrel tower bolt of extruded section 200mm long

S&F in extruded aluminium alloy handles 150mm long fabricted type, anodised.

S&F of aluminium alloy wire cloth, 0.45 nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staple.

S&F of steel window with side hung shutters including projecting type hinges, steel handle and steel pegstay, complete with glazing baar, dovetailed or welded.

- ditto - item No 31 but without glazing bar

M&L for 18mm thick Marine plywood, shutter grade BWP, type BB with both side 0.9mm thk decorative choice laminate type 1 of surface finish, colour and pattern as approved i, fixed with approved adhesive as per manufacturer's instruction,fixed with screws to timber frame work including 1st class HW lipping alround the shutter/edges and polishing etc complete all as specified and directed. by engineer In Charge.

S&F of continuous (piano) hinges, mild steel, bright finish or electrogalvanised fixed in repair.

Dismantling boarding any description fixed in any position with screws.

M&L for two coat of synthetic enamel paint( finishng coat) over one coat of pink primer to new wood surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified and as directed by Engineer-in-Charge.

S&F of anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws aluminum poder coated tower bolt 02 Nos/ Each shutter etc. complete all as specified (Note: Colour coating shallbe approved by Engineer-in-Charge)

M&L for preparation of old painted of wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing and removing rubbish off the premises (outside MD land)

M&L for coloured glazed ceramic wall tiles 450x300x7mm thick as in vertical surface set and jointed in neat cement slurry & pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.11 sqm but n. exc.0.18sqm, in floor etc set and joined in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for light shade Vitrified ceramic coloured tiles 10mm thick(Square / rectangular ) polished area of each tile not exc 0.36 sqm in floors etc. set & jointed in neat cement slurry and pointed in white cement to match over 15mm thick screed bed in CM(1:6), complete all as specified and directed.

M&L for light shade Vitrified ceramic coloured tiles 10mm thick(Square / rectangular ) polished area of each tile not exc 0.36 sqm in skirting or dado etc. set & jointed in neat cement slurry and pointed in white cement to match over 10mm thick rendering in CM(1:4),complete all as specified and directed.

Dismantled of brick masonry work built in cement mortar or cement lime mortar complete all as specified and directed by Engr-in-Charge.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for Rendering 10 mm thick on brick or concrete surfaces in cement mortar 1:6, finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly untreated plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer with alkali resistant priming paint complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces finished even and smooth without using extra cement including water proofing compound complete all as specified and as directed.

M&L for applying two coats of weather proof exterior emulsion paint over priming coat of exterior primer on new or untreated plastered surfaces using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar (1:3) on ceilling finish even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces on ceiling and applying three coats white wash complete all as specified and as directed.

M&L for preparation of old treated internal surfaces of walls and applying one coat of oil bound distemper(approved quality and tint) using painting rollers complete all as specified and directed.

M&L for preparation of old decorated surfaces and applying two coat of white wash on ceiling surface complete all as specified and directed.

M&L for repairing of chajja / roof projection/ceiling by taking down old plaster, damaged concrete surface,cutting of exposed reinforcement and making good with 1:4 including admixture of SBR (cost of SBR including) as per manufacture, and provide reinft cement concrete 1:2:4 type B1 as required, necessary scafolding,formwork etc up to 12 m heigh and applying 10 mm thick rendring in cement mortar 1:3 including providing chicken mesh wire netting where necessiaty , finishing the surface even & smooth with out using extra cement complete all as specified and directed.

S&F as in repair rotational moulded polythyene 500 litrs water storage tanks cylindrical vertical with closed top hoisted and fixed in position including 20mm dia float valve brass fitting including old disconnecting and taking down complete all as specified and directed.

S&F as in repair rotational moulded polythyene 1000 litrs water storage tanks cylindrical vertical with closed top hoisted and fixed in position including 25mm dia float valve brass fitting including old disconnecting and taking down complete all as specified and directed.

S&F in repair 15mm bib tap standard of PTMT any colour fancy type long body high pressure screwed for iron pipe and fixed (minimum weight 15 mm- 105 gms) etc complete all as specified and directed.

S&F in repair 15mm bore bib tap cost copper alloy CP fancy type long body with crutch or butterfly handle screwed to iron pipe complete complete all as speciifed .

S&F in repair 15mm stop valve, fancy type chromium plated , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed complete all as specified and as directed.

S&F in repair 15mm bore stop cock concealed long shank chromium plated fancy type screwed down high pressure with crutch or butterfly handle complete all as specified and directed.

S&F in repair 15 mm pillar taps, fancy type cast copper of long body alongwith capstan heads, chromium plated,swan neck screwed down high pressure , with or without letter ‘H’ or ‘C’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed..

S&F in repair 15mm CP WHB mixer of long neck for mixing hot & cold water screwed down for iron pipe and and fixed complete all as specified and directed.

S&F as in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F as in repair plastic seat cover white/coloured (as required at site) for water closet padestal pattern with flat bottom and mild steel chromium plated hinging device including taking out old seat cover complete all as specified and directed.

S&F of soap dish, any type, fixed to plug with chromium plated brass screws in the wall with glass shelf assembly complete all as specified and directed.

S&F as in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.

S&F in repair PVC flush of polyethylene of low or high density or PVC , 32mm dia (corrugated) for wash hand basin/flush cistern fixed in repair complete all as specified and directed.

S&F as in repair for PVC connection 600mm long superior quality with PTMT nut on both side complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 550x400mm including waste coupling waste pipe and plug and porcelain stopper brackets and cutting for and pinning in ends of brackets or erecting stand fixed in repair complete all as specified and directed.

S&F in repair 10 ltr capacity low levels flushing cistern with PVC bend and PVC flush pipe complete all as specified and directed.

S&F of sinks made of stainless steel 1 mm thick kitchen or laboratory with drainage board of size 915 x 460 mm with plugs, washers and wastes; incl bedding in cement mortar on to dwarf wall or including fixing cantilever brackets of angle iron 50x50x6mm and connecting union to pipe, bowl size 410 x 330 x 160 mm complete all as specified and directed.

Taking up or down 20 mm bore GI tubing and connections and removing from store of following sizes, complete all as specified and directed.

- ditto - all as per above item No. 74 but 15 mm bore tubing.

S&F of 20 mm bore, 3 layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls, ceiling or in floors etc.

- ditto - all as per above item No. 76 but 16 mm bore tubing.

M&L of vitreous water closet (Squatting pan, Orissa pattern, size 580 x 440 white, with integral foot rests and 'P' trap (excluding flushing cistern and flush pipe) including provision of cement concrete bedding complete all as specified and directed.

S&F of white vitreous china ware wash down water closet pan (pedestal pattern) including soft closing seat cover.

S&F in repair angle bracket for WHB and kitchen sinks incl making good to existing surfaces.

S&F in replacement of PVC water tank lid suitable for water tank of cap 500 Ltr / 1000 Ltr complete all as specified and directed.

S&F in replacement of PTMT grating doom 125mm dia with waste hole of approved make and fixing with cement mortar 1:3 as in repair complete all as specified and directed.

S&F in repair waste coupling PTMT suitable for 32 /40 mm bore pipe complete all as specified and as directed.

S & F in repair towel rail 600mm long of chromium plated brass screw and wooden / plastic cleats .

S&F in repair 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 20mm dia iron pipe and fixed (minimum weight 15mm-142gms/20mm 210gms/25mm 455gms/40mm 690gms complete all as specified and directed.

Demolition and breaking up drain 75/100mm pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed.

S&F of PVC (SWR) pipe 110 mm dia single socketed with rubber ring joints laid in trenches or in floor including necessary excavationcomplete all as specified and directed.

S&F of PVC (SWR) pipe 110 mm dia single socketed with rubber ring joints fixed to wall complete all as specified and directed.

S&F of PVC (SWR) pipe 110 mm dia bends complete all as specified and directed.

S&F of PVC (SWR) pipe 75 mm dia single socketed with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S&F of PVC (SWR) pipe 75mm dia single socketed with rubber ring joints fixed to wall complete all as specified and directed.

S&F of PVC (SWR) pipe 75 mm dia bends complete all as specified and directed.

S&F in repair/replacement of Pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with screw including dismantaling old sheeting complete all as specified and directed.

S&F in repair/replacement of pre-painted galvalume aluminum zinc coated GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with screw including dismantaling old sheeting complete all as specified and directed.

S&F in repairs, aluminium (extructed section) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F of solar control film 25 micron relfective type (garewater sun control or equivalent)

S&F in repair aluminium mortice lock 2 or 4 levers vertical type of size 100mm complete all as specified and directed.

S&F in repair brass locks for cupboard grade I, size 50mm for 4 levers complete all as specified and directed.

S&F in repairs, 32 mm MS pipe powder coated as in curtain rod etc complete all as specified and as directed.

S&F as in repair brackets ,knobes etc. for curtain rod complete all as specified and as directed.

Cleaning and removing all scale and dirt from tanks and from mouth of circulating pipes, Exc 500 ltr &not exc 1000 ltr of water storage tank.

Cleaning and removing all scale and dirt from tanks and from mouth of circulating pipes, Exc 250 ltr &not exc 500 ltr of water storage tank

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Dismantling old Non gear/gear operated MS/Steel rolling shutter/MS Shutter of any size any position complete all as specified and directed by Engr-in-Chrage.

S&F for 1.25mm steel rolling shutters, with gear opreated type with bevel gear box and crank handle without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push or manual type complete all as specified and as directed.

M&L for old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint including easening of steel windows by provding lubricant oil to hinges/pivet complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (20mm graded aggregate) as in kerbs/coping and the like including weathering, slightly rounded or chamfered angles and throating, including formwork complete all as specified and directed

Dismantaling stone slabs or tiles of any description or thickness in floor complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2 1:4:8 ( 40mm graded aggregate) as in sub base for interlocking complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade fixed with grey cement and no pigment including 30mm thick sand filling under floors, watering and consolidation complete all as specified and directed by Engr-in-Charge.

- ditto - as per above item No.111 but except tile including 30mm thick sand filling under floors, watering and consolidation complete all as specified and directed by Engr-in-Charge..

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors laid over 15mm thick screed in CM 1:6, including dismantlig complete all as specified and direrected.

M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) finished even & smooth without using extra cement as directed complete all as specified and directed.

Dismantaling kerb stone for any descripition and any size complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortat 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage open where ever required complete all as specified and as directed

S&F framed work such as grills,gratings, mild steel in flat, round or square bars etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; rallings; framework of watertanks and similar work conforming to Fe 290 Gde-E-165.for Servant balcony portion and including existing wooden frame with wire mesh etc complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

SAGAR ENTERPRISES (BID ID -3164516)

STAR CONSTRUCTION CO (BID ID -3168279)

A S CONSTRUCTION CO. (BID ID -3163620)

tarun construction co (BID ID -3164245)

M/S GR construction compony (BID ID -3167768)

M/S MSD & Associate (BID ID -3164322)

Ayush Enterprises (BID ID -3169063)

B. S BUILDERS (BID ID -3164269)