REPAIR/MAINT OF ALL TYPES OF FANS, GEYSERS AND OTHER CONNECTED ITEMS AT AHRR UNDER GE EM RR HOSPITAL DELHI CANTT 10

Amount

Taking down unserviceable Geysers of any capacaity/type/make from various locations by disconnecting the electrical connection and Overhauling the geysers for necessary repair work comprising opening, descaling, brushing and cleaning of storage tank and examining of water tightness of storage tank after cleaning and descaling, checking & connecting earth continuity of electric items, adjusting of pressure release valves, checking of dead weight, cleaning of vent hole, including replacements of all defective parts of the geysers after repair, applying one coat of synthetic enemal paint (white colour) after prepration of old surfaces, marks MES Nos & AGE E/M RRH using black colour and testing complete all as specified and directed by Engr-in-Charge. Note- 1. Any parts other than indicated in item shall be measured and paid seperately under respective items here-in-after as supply only, however labour charges for taking down and fixing of these parts(except parts catered as M&L or S&F) are deemed to be included in quoted rates. 2. Contractor to ensure to depute the electrician once a day for attending and taking out/down and refixing again duly repaired the geyser with in 08 hrs after receiving the complaint.

Supply only heating element 2 KW capacity ISI Marked suitable for geyser of any type / Make and capacity complete all as specified and directed.

Supply only of thermostat ISI Marked suitable for geyser of any type and capacity including making necessary electric connection and testing the geyser complete all as specified and directed.

Supply only of inner shell of suitable size made of stainless steel, suitable for geyser 25 litres capacity with and including all suitable fixing accessories complete all as specified and directed.

All as per Srl No items No 4 here-in-before but 50 ltrs capacity.

Supply only of outer shell of suitable size made of steel sheet for geyser of any type/Make and 25 litres capacity complete with two coats of synthetic enamel paint over one coat of primer by spray gun with all suitable accessories, complete all as specified and directed.

All as per Srl No items No 6 here-in-before but 50 ltrs capacity.

Supply only of indicator lamp set of Red &Green colour, suitable for geyser of any type / Make and capacity ISI marked including making necessary electric connection complete all as specified and directed.

Supply only appratus plate assembly 6 hole/9 hole complete with inlet / outlet, thermostat pipes with drain plug and screw including clamps for holding the elements, nuts, bolt etc, for geyser of any type/Make and 10 ltrs to 50 litres capacity complete all as specified and directed.

Supply only bottom cover plate (2 valves) with matching colour of geysers of any type and capacity complete all as specified and directed.

Supply only non return valve in position ISI marked made out of cast copper alloy, internally screwed on one end and externally screwed on other end suitable for iron pipe of size 15 mm, suitable for geysers of any type/Make and capacity complete all as specified and directed.

Supply only 15mm bore 450 mm long flexi connection braided pipe of best quality ISI marked suitable heavy duty for cold and hot water and complete connection with geyser including all accessories complete all as specified and directed.

Supply only 15mm bore 600 mm long flexi connection braided pipe of best quality ISI marked suitable heavy duty for cold and hot water and complete connection with geyser including all accessories complete all as specified and directed.

Supply only of new insulating material made of PUF / glass wool of superior quality of 16 Kg / Cum density in geyser of any Type/Make of 25 ltrs to 50 litres capacity complete all as specified and directed.

S&F in repair GI fastner 10 mm dia x 100 mm long duly threaded with GI nut and washer etc for holding geyser (set of 04 Nos) including fixing arrangement by making necessary holes and using cement mortar(1:2) or PCC 1:2:4 and making good the disturbed surface as per existing complete all as specified and directed. (Note: 04 Nos fasteners shall be measured as one job)

Supply only vaccum release valve complete all as specified and directed.

Supply only Pressure release valve complete all as specified and directed.

Taking down unserviceable ceiling / exhaust / cabin / wall / air circulator / padestal fans of any type / make / capacity from various locations of AHRR complex by disconnecting the electrical connection and overhauling the same comprising of cleaning the fans to remove sticky dust with cloth or emery paper, oiling, greasing, including replacement of defective parts such as split pins, terminal block, rubber reel, PVC bush, body screws, MS stator shaft work, Machining of shaft & fan body for making housing etc, applying one coat of synthetic enemal paint match with existing surface (white/green/gray colour) after prepration of old surfaces, marks MES Nos & AGE E/M RRH using black colour on all types fans and refixing the same in position after repair and testing complete all as specified and directed by Engr-in-Charge. Note- 1. Any parts other than indicated in item shall be measured and paid seperately under respective items here-in-after as supply only, however labour charges for taking down and fixing of these parts (except item catered M&L ) are deemed to be included in quoted rates. 2. Contractor ensure to depute the electrician once a day for attending and taking out/down and refixing again duly repaired the any type of fan with in 08 hrs after receiving the complaint.

M&L for rewinding of ceiling fan mortor of 1200 to 1400mm dia sweep including cutting and removing the old defective/burnt winding wire, cleaning the core of the fan motor, rewinding the fan motor with and including super enameled copper winding wire of appropriate/same gauge using insulating materials, varnishing the core assembly, drying the winding for adequate period to remove the moisture content, strengthening the winding and re-assembling the core including testing to the speed and flow of the fans, complete all as specified and directed.

All as per srl item no 19 here-in-before but for Exhaust fan of 230 to 380 mm sweep size.

All as per srl item no 19 here-in-before but for Exhaust fan of 450 mm sweep size.

All as per srl item no 19 here-in-before but for Exhaust fan of 600 mm sweep size of 3 HP capacity .

All as per srl item no 19 here-in-before but for Wall fan / air circulator /pedestal fan of 400-450 mm sweep size.

All as per srl item no 19 here-in-before but for Wall fan / air circulator of 600 mm sweep size.

Supply only ball bearing suitable for ceiling / exhuast fan of any type / size / make, complete all as specified and directed.

Supply only capacitor of 2.5 mfd, 440V, 50 Hz suitable for ceiling / exhaust / cabin / air-circulator / Padestal fan of any type / make / size, complete all as specified and directed by Engr-in-Charge.

All as per srl item no 26 here-in-before but of 3.15/4 mfd capacity.

All as per srl item no 26 here-in-before but of 6/8.0 mfd capacity.

Supply only metallic fan blades (Set of 3 or 4 blade)) of existing pattern & colour scheme including screws suitable for ceiling fan of any make / model / sweep size, complete all as directed.

All as per srl item no 29 here-in-before but for Exhaust fan of upto 300-380 mm sweep size.

All as per srl item no 29 here-in-before but for Exhaust of 450 mm sweep size.

All as per srl item no 29 here-in-before but for Pedestal fan 400 to 450mm sweep size.

All as per srl item no 29 here-in-before but for Pedestal fan of 600 mm sweep size.

All as per srl item no 29 here-in-before but for Wall fan/Air circulated fan 400 to 450 mm sweep size.

All as per srl item no 29 here-in-before but for Wall fan/Air circulated fan 600 mm sweep size.

Supply only factory made ceiling fan down rod 0.3 m long, made out of heavy grade MS conduit of 19/20 mm outer dia, with hole at both ends for passing cable, cut at one end for fixing of fan, hole at other end for fixing fan clamp, duly painted with white synthetic enemel paint of 1st quality, complete all as specified and directed by Engr-in-Charge.

All as per srl item no 36 here-in-before but 0.9 m long complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of fresh air fan of PVC body single phase, 240 volts, upto 1200 RPM of 200mm sweep, copper winding complete all as specified and directed by Engr-in-Charge.

All as per sl item No 38 But 250 mm Sweep.

All as per sl item No 38 But 300 mm Sweep.

Supply and fix in repair metal body louvers heavy duty including fixing accesoories of size 230 mm sweep to 380 mm sweep complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair metal body louvers heavy duty including fixing accesoories of size 450 mm sweep complete all as specified and directed by Engr-in-Charge.

Supply only fresh air fan motor single phase, 240 volts, upto 900 RPM suitable for 250mm to 300mm complete all as specified and directed by Engr-in-Charge.

M & L in repair of hot food trolley of any shape and size including broken wheel base, pulling handle, hinges, doors, door supports, chains, leakages of water etc using stainless steel sheet (Gd-304) of min 2.0 mm thickness and SS (Gd-304) brackets, angles, hollow tubes, flats etc of any shape of size with and including SS hinges, screws / fasteners, complete electrical work, all kind of machine works i.e. cutting, SS welding, bending, moulding, grinding, polishing, buffing etc to get the required strength, shape and size, fixed to any position and makes functional complete all as specified and directed by Engr-in-Charge. Note : 1. The cost of all kind of SS material i.e. sheet, angle, tube flat, all kind of fittings & fixtures i.e. hinges, screws / fasteners, handles etc (except the parts catered here-in-after as supply only) are deemed to be included in quoted rates and no extra cost shall be paid to the contractor in this effect. 2. The cost of transportation (to and fro) and other necessary equipment shall be arranged/brought by contractor and no extra cost shall be paid to the contractor in this effect. 3. The defective spare parts as catered supply only shall be paid and measured seperately in relevant items here-in after.

Supply only 25 Amps socket multipurpose complete all as specified and directed by Engr-in-Charge.

Supply only PVC insulated, PVC sheathed, multistranded copper conductor wire of 2.5 Sqmm size, three core, ISI marked, complete all as specified and directed by Engr-in-Charge.

Supply only 150 mm dia caster wheel with swivel type heavy duty supporting base plate bracket complete with nut and bolts etc suitable for hot food trolley, complete all as specified and directed by Engr-in-Charge.

Supply only 150 mm dia caster wheel with fixed type heavy duty supporting base plate bracket complete with nut and bolts etc suitable for hot food trolley, complete all as specified and directed by Engr-in-Charge.

Supply only dry type U shaped heating element 2 KW of length minimum 2 mtr suitable for hot food trolley, complete all as specified and directed by Engr-in-Charge.

M&L for maintenance / servicing of Automatic/ sensor silliding door including replacement of defective /spare parts/items such as such as side plate, timming belt, hanger roller, cable tray Plates motor, controller belt connector Belt adjust Pully etc excluding Door Glass, when required by automatic door technician / Engineers must be qualidfied to work on automatic door and make it in proper functning complete all as specified and directed by Engr-in-Charge. Note :-1. To provide the evidence that parameter are adhered too and safety devices are in place 2. if the fault found which affects safe operation of the door, then the door operating equipement must be switched off and the door made safe.

Supply and fix in repair SMPS assembly for automatic sliding door ES 200 Easy, CS 85 complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair MDU controller assembly for automatic sliding door CS 85 complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair motor assembly for automatic sliding door (CS 85) complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair return pulley assembly CS 85 for automatic sliding door (CS 85) complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair main roller for automatic sliding door (CS 85) complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair counter roller for automatic sliding door (CS 85) complete all as specified and directed by Engr-in-Charge.

S&F cuboid type ceiling fan ready to fix in the ceiling of 2ft x 2ft size complete with all fixing accessories complete all as specified and directed.

RUCHIKA ENGG.WORKS