SPECIAL REPAIR TO JUBILEE GARDEN MSQ BLDG NO 101 (08 QTRS) AT DSSC WELLINGTON

Dismantling of floor hearth or wall tiling including cement mortor bedding(but not backing) complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each complete all as specified and directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, complete all as specified and directed.

Demolition of cement concrete in ground floor & pavings (unreinforced) (below or above ground level) and removing debris off the site complete all as spcified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for drain,roof padding concrete etc all as diercted

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

Demolition for brickwork or stone masonry laid with cement mortar or cement lime mortar

Demolition of cement concrete (reinforced) of any decscription and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for non skid ceramic tiles7 to 8 mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.11 sqm, in floors and sill etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for non skid ceramic tiles7 to 8 mm thick (square/rectangle) area of each tile exc0.18sqm but not exc 0.36 sqm, in floors and sill etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Ditto all as per item No 10 above but set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick rendering in CM 1:3 complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 350x250x7 / 450x350x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified and as directed.

S&F Pressed steel frames of 1mm thick factory made of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and as directed.

Supply and fix factory made 35mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type Decorative face on both sides with lipping to match with frame and fitted to chowkats etc., complete all as specified and as directed.

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

Supply and fix Factory made PVC solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Supply and fix 35mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.

M&L PCC type B-0 (1:2:4) using (12.5mm graded aggregate) as in filling of steel chowkats or frames complete all as specified and as directed.

S&F Mild steel butt hinges 100mm long, medium weight, cold rolled.

S&F 150mm, extruded aluminium alloy handles, fabricated type, anodised complete.

S&F 150 mm long, Aluminum anodised barrel tower bolts, of extruded section complete as specified and as directed.

S&F 300mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Supply and fix Aluminium powder coated sliding widnow with appropriate frame section(with three track) including two glazed and one mesh window shiutters with 5mm thick plain glass and including on shutter including jointing cleat, glazing clips, rubber neopreone packing including necessary accessories like handles, hinges etc complete all as specified and directed.The details of window section shall be as follows 1) Window bottom track(for glazed window) frame shall be of 31.75mmx 61.60mmx 1.2 mm and top track frame shall be of 31.75mmx 61.6mmx 1.2mm thick. 2)Window bottom & top track (for mesh window) frame shall be of 19mmx 31mmx1.2 to 15mm thick . 3) Th window sash frame for glazed window shall be of 39.40mmx 17.70mmx 1. to 1.2mm thick and the mesh shutter sash shall be of 43mmx 14mmx 1 to 1.5mm thick.

Supply and fix Aluminium powder coated openable/side fixed ventelator with appropirate frame section including 4 to 5mm thick pin head or hatched glass all as directed including provn of appropriate opening for fixing of exhaust fan and including with or wthout gauged shutter including jointing cleat, glazing clips, rubber neopreone packing including necessary accessories like handles, hinges etc complete all as specified and directed.Note : The contractor should be approved the frame section for Almn window/& window/ ventelator from the Engr incharge before procurement of the material.

Excavating in trenches, n.exc 1.5m wide and n exc 1.5 in depth; for foundation getting out hard/dense soil.

Material and labour for providing plain cement concrete 1:4:8 type D2, using( 40mm graded stone aggregate ) as in foundation filling and mass concrete for manhole&Septic tank all as specified and as directed.

M&L for Precast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid solid blocks exc 10cm width and setting in mortar(1:6) complete.

Providing precast cement concrete solid building blocks or slabs 10cm thick type C-1(1:3:6) using 20mm graded stone aggregate and setting in mortar,(1:4) complete, in walls all as directed.

M&L for Providing precast cement concrete louvres and jallies,25mm thick type C-0(1:3:6) using 12.5mm grade stone aggregate including all mould- ings and set in CM(1:6) complete all as directed and specified.

M&L for Reinforced cement concrete (nominal mix) type B-1(1:2:4) using 20mm graded stone aggregate as in Beams, cantilevers,band , bressummers,lintels over 1.5m span etc all as specified and dircted.

M&L for RCC Type B1-1:2:4 (using 20mm graded aggregate) as in slab supported on walls, beam and columns in floor, roof/cooking platforms etc

M&L Formwork to flat fair finished surface of concrete as in sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves,kitchen platform,foundation for post etc all as spd and directed.

M&L for precast RCC 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) as in cover slab and set in cm 1:6 including necessary form work and moulds complete as specified and as directed.

S&F TMT bars Mild steel bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

all as item No 36 above but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L for Dubbing out average 20mm thick on irregular face of walls of RRM /PCC block in cement plaster 1:6 all as directed.

M&L 15mm thick rendering plaster on fair face of brick-work or concrete surface incl finish the surface even and smooth CM 1:6 complete all as specified and as directed .

M&L 15mm thick rendering plaster brick or concrete surface in CM 1:4 including adding water proofing compound as per manufactures instruction complete all as specified and as directed .

M&L 10mm thick rendering plaster on fair face of brick-work or concrete surface incl finish the surface even and fair in cement in CM 1:6 complete all as specified and as directed .

Material and labour for rendering 5mm thick in Cement Mortar 1:3 on concrete surfaces of ceiling chajja etc , finished even and fair complete all as specified and as directed.

M & L for mild steel work as in tubular roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat, square tube etc sections) including distance pieces, cleats etc. Fe 410-W (Gde-E- 250) quality- B complete all as specified and as directed.

S/F Joist, channel, angle or tee sections,Fencing post,frame for grill etc fixed independently, without connecting plates, etc(cut to ordinary lengths i.e within 20mm of the length indicated quality conforming to Fe 410-W(gde-E-250)quality-B

M&L for framed work such as grills, gratings,flat iron for fencing post etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165

M/L preparing new surface of steel and appling two coats of synthetic enamel paint over a coat of primer red oxide

S & F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet crumped where ever required 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverings fixed with self tapping screws complete all as specified and as directed.Make: JSW/TATA,JINDAL

M & L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in padding, coping, bed plates, hold fast blocks, sunken floor sub bse etc., including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete as specified and as directed.

M&L 75mm thick Plain Cement Concrete type C-1, 1:3:6 (20mm graded stone aggregate) as in floors, pavings finished even & roug without using extra cement complete as specified and as directed.

M&L PCC 1:4:8 type D2 with 40mm graded stone aggregate as in sunken floor/toilet floor /kitchen floor concrete finished the surfaces even and fair to receive top layer all as specified and as directed.

M&L Providing 25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate .as in floors for levelling course including finish the surface even and rough to receive the top finish complete all as directed.

Taking down steel tubing and connections of 15 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Taking down steel tubing and connections of 20 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

S&F 15 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

S&F 20 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

Dismantling existing tanks exc. 500 lit & n. exc. 1000 litres capacity, removing off the site complete all as specified and as directed.

Supply and Fix, 1000 litres capacity triple layered Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) complete all as specified and as directed. Make: Sintex/Polycon/Vectus

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) capacity exc 500 not exc 1000 Ltr

Rendering 15mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound as per manufactures instruction on roof slab/ floor complete all as specified (liquid water proofing compound are measure seperately).

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

Meterial and labour for Providing, cement concrete type B-0 ,1;2:4 usinf 12.5mm graded stone aggregate in roof kerbs ,koving for chajja or mud stops, rounded or chamfered on edges etc all as directed.

S&F and in repair 25mm bore, Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed,weight 455 gms complete as specified and as directed.

S&F 15mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

S&F 20mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exc 10 cm grith in brick wall

Supply and fix 18mm thick High Density High Moisture Resistant (HDHMR) Board, HDWR(High density water resistant) both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc., including dismantling of existing any type of board and complete all as specified and as directed.Note: All exposed edges/surfaces to be finished with same laminated sheet to match with the other surfaces and nothing will be paid extra.

Material and labour for Aluminium designer powder coated decorative curtain rods (Drapery rods) 20mm dia, exterior grade 3mm thick with and including side caps, holding clamps and 'F' and 'L' brackets, fixed to wall with PVC rawl plug and brass screws etc., complete all as specified and as directed.

Material and labour for Granite work with 20mm thick machine cut, Jet Black granite slab in single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:4, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in cooking platforms, microwave platform, WHB counter top in steps, jambs, pillars, window-cills, etc, including cutting, polishing and rounding to edges of stone slabs etc., complete all as specified and as directed.

Material and labour for providing plain cement concrete 1:3:6 type C1, using( 20mm graded stone aggregate )as in drain / surface channel including necessary form work complete all as specified and as directed.

M&L 75mm thick Plain Cement Concrete type C-1, 1:3:6 (20mm graded stone aggregate) as in floors, plinth protection etc. finished even & fair without using extra cement complete as specified and as directed.

Supply and fix Stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 18mm thick shutters complete all as specified and as directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

Supply and fix stainless handle of size 100mm for kitchen/bedroom cupboards fixed with screws complete all as specified and directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

M&L for chequered cement concrete tiles of size 30cmx30cmx 25mm thick ,set ,jointed and pointed in neat cement slurry in floors with grey cement and pigments of required colour over 20mm thick thick screed bed in CM (1:6) complete as specified and as directed.

Returning filling including spreading leveling watering and well ramming in layers not exc 25 cm hard and dense soil

Removing excavated materialnot n exc 50 Mtr and depositing where directed (Soils) at a level not exc.1.5mts above the starting point

Supply and fix two way Bib cock 15 mm bore, cast copper alloy, chromium plated, fancy type with flange and crutch or butterfly handle conforming to ISscrewed down high pressure with fly nuts, screwed for iron pipes or for brass ferrule etc., complete all as specified and as directed. Make : Prayag/Hindware/Cera

S&F health faucet including 1.2m long flexible tube and wall hook complete all as specified and as directed. Make : Prayag/Hindware/Cera

S&F in repair bib cock long body with wall flange .Make: Cat No G1405A1 of Parryware/ F730011 of Hindware / CON 107 KN of Jaquar or equivalent all as specified and directed.

S & F Single lever sink mixer with swinging spout, wall mounted model with connecting legs and wall flanges complete all as spd and directed Make- Cat No G3335A1 of Parryware/Cat No F320027 of Hindware/Cat No DRC-37165 of Jaquar or equivalent all as specified and directed.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete including SS sink waste coupling 32mm dia and waste pipe complete all as spd and directed.

Supply and fix in repairs, stainless steel plate racks made of stanless steel 0.80mm thick sheet standard size 600mmx400mmx250mm complete all as specified and as directed. Make: Prayag/Tata/Ebco or equivalent

Supply and fix in repairs corner glass shelf made out of glass with cp guard rail and wall fixing accessories of 300mm radius matt finished, chromium plated (MCH/Colour CP) with brass brackets fixed on walls complete all as specified and as directed. Make : Prayag/Parryware/Hindware or equivalent

Supply and fix in repairs Angular stop cock 15mm bore, cast copper alloy, chromium plated, fancy type with long shank conforming to IS as per Cat No.CON-053KN of Jaquar or G3053A1 of Parryware, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet squatting pan, Orissa pattern of size 580x440mm with integral foot rest , colour white with and including P trap, lime concrete bedding and making necessary connection to soil pipes and flushing cistern etc.,complete all as specified and as directed.

S & F as in repairs Viterous china wash down water closet pan (pedestal pattern) with "P" or "S" trap incl fixing bolts, PVC bend, seat cover and connecting to PVC (SWR) pipe complete all as specified (Excl flush tank) complete.

S&F in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections incl 110mm PVC (SWR) WC connector with lip ring etc complete (Excl flush tank)

S&F as in repairs PVC valveless, symphonic action type low level flushing cistern(Duel flush) white with inlet, ball valve, float and handle etc complete capacity 10 litres incl brackets including plush pipe connected to IWC/EWC complete all as specified and directed.

S&F in repairs Towel rail 600mm long complete all as specified Make : Prayag Cat No GBA-131 or equivalent in Parryware/Hindware)

S&F two piece type stainless steel gratings square or round 100 mm size complete all as specified and as directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm.

Taking down Cast iron / PVC pipe of any dia and jointed in cement mortar taking out of wall,trenches,floor etc including fittings, like sheos, bends, Y or T bend , etc complete all as specified and as directed.

S&F 160 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor/trenches complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F PVC (SWR) plian bends110 mm bore complete.

S & F PVC (SWR) bends110 mm bore with oval acces door complete.

S & F PVC (SWR) plain bends 75mm bore complete.

S & F PVC (SWR) bends 75mm bore provided with acess door.

S & F PVC (SWR)110mm bore branch piece single (single T) equal or Unequal

S & F PVC (SWR)75 mm bore branch piece single (single T) equal or Unequal

S & F PVC (SWR) vent cowl 110 mm bore

S & F PVC (SWR) vent cowl 75 mm bore

S&F in repair 75 mm dia PVC floor trap with cockroach trap and grating (double bowl type) with hole for waste pipe in grating including jointing to waste pipe complete all as specified and as directed.

Supply only liquid water proofing compound of approved make complete all as specified and as directed.

Complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth and applying, one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint complete all as per manufacturer instruction as directed: NOTE: The painting work to be executed by authorised applicator of the manufacturer.Make :-APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger or Nerolac Excel Top guard of Nerolac

M&L Preparing newly plastered surfaces of external walls and applying one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint complete all as per manufacturer instruction as directed.Make:APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger or Nerolac Excel Top guard of Nerolac

M&L for complete removal of existing treatment on surfaces of wall and applying applying two coats of Oil bound distermper over a coat of alkali resistant primer by approved applicator of the manufacturer of the paint and all as specified and as approved

M&L for preparation of new surfaces of walls and applying two coats of Oil bound distermper over a coat of alkali resistant primer by approved applicator of the manufacturer of the paint and all as specified and as approved.

Material and labour for Average 1.5mm thick applying wall care putty of approved brand on wall surface or concrete surface of any description complete all as directed.

M&L for complete removal of existing treatment on surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

M& L for applying three coats of white wash on ceiling including preparation of newly plastered surfaces of ceiling complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring complete with 1.5 Sq mm single core PVC insulated FRLS unsheathed cable 1100 Volts grade with multi stranded copper conductor confirming to IS 694 1990 with ISI marked ( for phase, netural and earth) in and including PVC conduit with ISI mark of minimum 20 mm ia and all accessories concealed including / cutting / chases in wall / ceiling /fixed to roof /truss/ columns etc and including factory made branded make embossed glvanised steel pressed terminal boxes alongwith suitable size modular cover plates with frames for fixing modular switches and sockets , fan regulators etc. of suitable size and the earth wire to connected to common earth dolly complete all as specified and directed for one light point / fan / call bell point controlled by one modular switch 6 A one way

All as described in Sl Item No 3 herein before but 3 pin socket out let 6 Amps on independent board

M&L for point wiring complete all all as specified with 1100 Volts grade 2.5 sqmm single core PVC insulated FRLS 1000 Volts grade with multi stranded copper conductor confirming to IS 694 1990 with ISI marked ( for phase, netural and earth ) in and including stove enamelled steel conduit with ISI mark of minimum 20 mm ia and all accessories concealed including / cutting / chases in wall / ceiling /fixed to roof /truss/ columns etc and including factory made branded make embossed glvanised steel pressed terminal boxes alongwith suitable size modular cover plates with frames for fixing modular switches and sockets , fan regulators etc. of suitable size and the earth wire to connected to common earth dolly complete all as specified and directed for one three pin modular switch socket 16 Amps outlet on independent board

M & L Modular type switch 6 Amp one Module, one way complete all as specified and as directed.

Supply & Fixing Modular type shuttered socket outlet , 3 Pin, 6 Amp, 230 Volts two modules with ISI mark complete all as specified and as directed.

M & L Modular type switch 16 Amps one module, one way, complete all as specified and as directed.

Supply & Fixng Modular type shuttered socket outlet, 3 Pin, 6/16 Amp,230 volts, Two modules with ISI marked complete all as specified and as directed.

M & L ceiling rose ,Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body with face backlite, 3 terminal complete all as specified and as directed

M & L Modular Bell push 6A 1 module complete all as specified and directed.

M & L Buzzer, Ding Dong AC. 230 volts,single pole complete all as specified and directed

S&F in repair LED security light luminaries fitting 1X30 watt LED with min 120 lumens/watt output including GI bracket made out of GI pipe light grade 25 mm dia 1.20 m long bent to shape with suitable size mild steel clamps of size 50 X 6mm with nut, bolt, & washers as required at site for fixing of street light on LT poles / wall including making connection with PVC insulated 3 single core of 1.5 sqmm size multistranded copper conductor cable complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC , with min 120 lumens/watt (4 ft.) High performance electronic driver , operating temperature 10 C to 35 °C operating voltage range 140 V -270 V , Average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 Im/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 10W, 220V, AC , with min 120 lumens/watt (2 ft.) High performance electronic driver , operating temperature 10 C to 35 °C operating voltage range 140 V -270 V , Average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 Im/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F decorative bulk head edge lit LED luminaire 10W with min 120 lumens/watt output IP >= 65,IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W with min 120 lumens/watt output made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.Make :- Havells cat part No HEXAFT10WLED857SSYMBOPC or equivlent Bajaj / crompton

Supply and fixing LED lamps 9W, 3000K with B-22 base cap all as directed by the Engr-in-Charge Cat No: LHLDDEBIA5R009 of Make Havells or techno-commercially equiv In Jaguar/Philips

Supply, install, testing & commissioning of Exhaust fan, PVC body with connected accessories 250 mm sweep, single phase, 240 Volts, AC, 50 Hz,800RPM, Air delivery not less than 860 CMH, noise level less than 45 dB and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed.Make : Havells, Cat No: Ventil Air DX or techno-commercially equivalent in Bajaj/Crompton.

Labour only for taking down the existig SPN DB, 08 Way along with MCBs and Concealing the old existing DB and refixing the Old MCB inside DB and making ncesaary electrical connection of submain wiring and point wiring with MCB inlet/outlet fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed.

Labour only for Taking down the existing electric water heater, replacing unserviceable spare parts like, PVC pipe to Steel braided hose for inlet and outlet water connections etc of storage type electric water heater (Geyser) of any type and any make up to 25 Ltr capacity, reassembling the geyser after servicing and refixing in the same position/location including water line connections and testing on completion all as specified and as directed.

Please Enable Macros to View BoQ information