SPECIAL REPAIR TO BLDG NO. 1A- GUARD ROOM INCLUDING TOILET BLOCK NEAR FSH OF HQ 146 INF BDE UNDER AGE (I) AYODHYA

Amount

Taking down chowkhat or frame with shutters (without taking of shutter from the frame) n.exc 1.50 Sqm each complete all as spd and directed by Engr-in-Charge.

Taking down chowkhat or frame with shutters (without taking of shutter from the frame) exc 1.50 Sqm but n.exc. 4.00 Sqm each complete all as spd and directed by Engr-in-Charge.

Dismantling asbestos cement (corrugated, semi corrugated) sheets in roof covering including ridges complete all as specified and directed.

Dismantling timber sacantling 40 Sqcm and over in section, fixed in any position complete all as specified and directed.

Dismantling of timber in fillets, rails, rafter, purlins etc under 40 Sqm cm in section complete all as specified and directed.

Dismantling wrought iron or mild steel work of any descrption not other wise provided for complete all as specified and directed.

Demolition of brickwork or stone boulder masonary built in cement mortar or cement lime mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises complete all as specified and directed.

S&F factory made solid PVC door frame (single rebated) of size 50mm x47 mm made out of 5 mm wood grain printed PVC sheet and edges painted to match the printed sheets, reinforced with MS square tube complete all as specified & shown on drawing.

S&F factory made solid PVC moulded with particle board core doors shutter 28 to 30 mm thick(syles) with 2,4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front panel and 2 mm plain colour PVC sheet on back face, suppling & fixing in the frame at site as per specification & drawing.

S&F pressed steel frame for door of size 125mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified as directed by the Engr-in-Charge.

M&L 40mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as spd and directed by Engineer-in-Charge.

S&F 35mm thick 2nd class HW factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (any number of sash bars), edges of framing plain, chamferred or rounded fitted with mitred beads for securing glass etc, size of members of shutter as specified in SSR Part-1, Section 8, Clause 8.20 (a) fitted to chowkhat, complete all as specified and directed by Engr-in-Charge.

S&F factory made uPVC area not exc 2.00 Sqm each white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm (plus minus 0.2mm).window profile with hollow section with multichamber. Frame (88mm x 52mm), sliding sash( 42mm*67mm), sliding mesh sash (42mm*57mm), sliding interlock (one vertical length in each shutter) (45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardwares and drainage of water etcmaking arrangement for fixing of hardware.EPDM gaskets,1.2plus minus 0.2mm thick galvanised steel frame (30mm*18mm) 2 Nos, sliding sash (30mm x 18mm) sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to wall with 8mm x 100mm long fasteners, steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed.

M&L for MS framed work such as grills, grating etc with ends of bars shouldered and/or riveted or forged into spikes, framed gaured bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F 4.00mm thick pin head glass and glazing with oil putty / wooden beading in squres / ractangle n.exc 0.5 Sqm in each pane up to three storey hight complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size extruded aluminium alloy butt hinges type B-21 with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed by Engr-in-Charge.

S&F 150mm size aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S&F 300 mm size aluminium sliding door bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engr-in-Charge.

M&L for MS work as in hold fast, clamps, stays and similar small articles conforming to Fe-290 Gde-165, complete all as specified and directed by Engr-in-Charge.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with stainless steel staples, complete all as specified and directed by Engr-in-Charge.

S&F 100mm size aluminium handle, cast type, anodised and fixed complete all as specified and directed by Engr-in-Charge.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls, finshed even and fair complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls (external surfaces), finshed even and fair complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar (1:3) on fair faces of concrete surfaces of ceiling, finshed even and fair complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 1 mm thick wall care putty complete as specified

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new steel & iron surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550Mpa as in roof covering / cladding to wall, ridges, fixed with self tapping screws complete all as specified and directed.

S&F rolled mild steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections, squre or ractangular hollow section) including distance pieces, cleats, gusset plates, base plates, railing, intricate/ornamental design etc conforming to Fe 410-W (Gde-E-250 quality A) complete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc ) or insulation boards /slabs /blankets of any thickness including cover fillets complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium snap grid frame work of size 605x605 mm for false ceiling complete all as specified and directed by Engr-in-Charge.

M&L for 6mm thick non asbestos fibre cement building boards fixed to or laid / inserted to timber / GI /Aluminium framed work with screws complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick cement concrete (1:2:4) type B1 (usin 20mm graded stone aggregate) as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L for 7 to 8 mm thick non skid joint free coloured ceramic (square/ rectangular), area of each tile exc 0.11 Sqm but not exc 0.18 Sqm (size not less than 400 mm x 400 mm), laid over and including 15mm thick screed bed in cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed with coloured cement with pigment to match the colour of tiles, complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles of size 300X450X7mm thick in vertical surface over & including 10mm thick rendering in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed by Engr-in-Charge.

M&L for 10mm thick dark shade vertified ceramic tiles (square/ rectangular) polished area of each tile not exc 0.36 Sqm, aid over and including 15mm thick screed bed in cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed with coloured cement with pigment to match the colour of tiles, complete all as specified and directed by Engr-in-Charge.

All as per Srl item No. 41.00 above but on vertical surfaces of wall such as dados, skirting etc over & including 10mm thick rendering in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed by Engr-in-Charge.

M&L for brick work with old size sub class 'B' bricks, built in cement mortar (1:6), straight or curved on plan exc. 6m mean radius complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china wash down closet squatting pan (Orissa pattern), of size 630X450mm, white (excluding flush pipe, flushing cistern) , including connection to trap and flushing pipe anti-syphonage pipe etc, making good to match the floor, all as specified and directed by Engr-in-Charge.

S&F in repairs, PVC low level flushing cistern 10 Ltr capacity syphonic action type, white with inlet, ball valve float and handle including brackets and PVC flush pipe 32mm dia low or high density for low level cistern complete all as specified and directed by Engr-in-Charge.

S&F in repairs, viterous china wash hand basin white, flat back of size 550 x 400mm including 32mm bore waste coupling, PVC down pipe of 32 mm bore and brackets complete all as specified and directed by Engr-in-Charge.

S&F in repairs, 15 mm dia bore bib cock fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs, 15 mm dia bore brass CP wall mixer for mixing hot & cold water, screwed down for water pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs, 15mm dia and 450mm long PVC connection pipe with PTMT nuts at both ends, complete all as specified and directed by Engr-in-Charge. .

S&F in repairs, looking mirror of size 600 x 450x 5.5mm thick, fixed on 6mm thick commercial decorative water proofing ply wood with coloured PVC frame all around and hook complete all as specified and directed.

S&F in reapirs, 20mm dia chromium plated towel rail 600 mm long 'D' type and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs, 125mm size chromium plated shower rose with or without swivel joints including fixing to steel pipe or union complete all as specified and directed by Engr-in-Charge.

Dismantling water tank of capacity exc 250 but n.exc 500 Ltrs and removing to store and S&F new 500 Ltrs capacity rotational moulded polyetheyline water storage tank (three layered), cylindrical vertical with closed top, hoisted and fixed in position with and including MS cover made of 0.56mm thick MS sheet with clip type bolt for locking arrangement for side openng and 50mm long sharp edged nails on top of cover for protection from monkey complete all as specified and directed by Engr-in-Charge.

S&F in repairs, 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

S&F in repairs, 20mm dia bore Gun-metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs, 15mm dia bore pillar tap with long screwed shank, cast copper alloy, chromium plated, fancy type with capstan head complete all as specified and directed.

S&F in repairs, viterious china wash down water closet pan (pedestal pattern) white with & including seat cover (excluding fixing bolts, flushing cistern and flush pipe) and fixed complete as specified and directed

S&F in repairs, chromium plated jet for pedestal pattern WC with 1 m long flexible pipe, screwed down, high pressure complete all as specified and directed by Engr-in-Charge.

S&F in repairs, 15 mm dia bore angle / stop valve with wall flange, cast copper alloy, fancy type, cromium plated, screwed down both ends for iron pipe complete all as specified and directed by Engr-in-Charge

S&F in repairs, 75mm dia bore PVC (SWR) pipes, single socketed, fixed to walls or laid in flooring in any length with rubber ring joints complete all as specified and directed.

S&F in repairs, 110mm dia bore PVC (SWR) pipes, single socketed, fixed to walls or laid in flooring in any length with rubber ring joints complete all as specified and directed.

S&F in repairs, 100mm dia stainless steel grating with or without waste hole complete all as specified and directed by Engr-in-Charge.

S&F in repairs, 75mm dia bore cast iron (sand cast) soil, waste and vent pipes, fixed as in spouts in any length with or without ears or fixed to wall / flooring with lead joints complete all as specified and directed.

S&F in repairs, 100mm dia bore cast iron (sand cast) soil, waste and vent pipes, fixed as in spouts in any length with or without ears or fixed to wall / flooring with lead joints complete all as specified and directed.

S&F 75mm dia bore cast iron bend, Tee or Y-shape branch pieces complete all as specified and directed.

S&F 100mm dia bore cast iron bend, Tee or Y-shape branch pieces complete all as specified and directed.

Taking up or down 15mm dia bore steel tubing and connection of any description and S&F new 15mm dia bore galvanised steel tubing with all fittings, medium weight, ISI marked, fixed to walls, ceiling or laid in floors complete all as specified and directed.

Taking up or down 20mm dia bore steel tubing and connection of any description and S&F new 20mm dia bore galvanised steel tubing with all fittings, medium weight, ISI marked, fixed to walls, ceiling or laid in floors complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips complete all as specified and directed by Engr-in-Charge.

Demolition cement concrete of any descrption and in any position not otherwise specipally provided for complete all as specifeid and as directed.

M&L for providing cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base and the like complete all as specified and directed.

M&L for sand filling as in cushioning layer below interlocking paver tiles, laid & spread in any thickness and well compacted to a true surface complete all specified and directed.

S&F 60mm thick machine pressed M35 precast concrete interlocking paver block (VIBROCOMPRESSED ) of any shape and size conforming to IS 15658 - 2006 with grey cement and no pigment complete all as specified and directed.

S&F in repairs, 150mm size floor door stopper of aluminium alloy body and tounge, anodised with hard drawn steel spring, fixed in floor complete as all as specified and directed.

M&L for construction of soakage well of 2.40m dia and 3.00m effective depth including all necessary earth work in any type of soil, PCC in foundation, walls of honey combed mansonry in CM with RCC top ring including intercepting chamber and screen chamber made of brick mansonry in CM, RCC cover slab in M25 / SFRC cover, interconnecting pipes of RCC/DWC, filled with brick bats complete all as specified and directed by Engr-in-Charge.

M&L for LLDPE Septic tank conventional type for 10 users, designed to carry sewage and sludge water including all necessary earth work in any type of soil, PCC in foundation, vent shaft, connection etc complete all as specified and directed by Engr-in-Charge.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc and getting out in soft/loose soil complete as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregsate) as in foundation, filling and mass concrete complete all as speicicfed and directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance exc 50 mtr but n.exc 250 mtr and depositing where directed at a level n.exc 1.5 mtr above starting point complete all as specified and directed.

M&L for 150mm dia bore reinforced cement concrete pipes, class NP2, laid and jointed with collars in cement joints complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in concrete bed to 150mm dia bore RCC drain pipe including packing under and completely surrounding the pipe with concrete after they are laid, jointed and tested complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in surface channel and drain complete all as specified and directed.

M&L extra for forming fair finishing to drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds etc, complete all as specified and directed. (Note:- Inner girth only be measured).

Taking down carefully old copper / aluminium point wiring (light, fan, call bell, socket or power) with all fittings & fixtures and M&L for new concealed type point wiring with PVC insulated PVC unsheathed electric (FRLS) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including non-modular type GI sunken boxes suitable for non-modular switches/sockets etc with 3mm thick hylam sheet with glossy finish including necessary cutting for fixing switches, sockets, regulators etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified for the following:-

All as per Srl item No. 85.00 above but for one light/fan point controlled by one, one way switch

All as per Srl item No. 85.00 but for One socket outlet point 6 A on same board with other switches

All as per Srl item No. 85.00 but for one socket outlet point 6 Amps on independent board but below the switch board of light point in the same vertical plane.

All as per Srl Item No. 85.00 here in before but concealed point wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable, green colour as earth continuity wire for 16 Amps power socket point controlled by one, one way 16 Amps non-modular switch on independent board complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole one way 6 Amps complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole one way 16 Amps complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin 6 Amps flush type complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin 6/16 Amps flush type complete all as specified and directed.

M&L for ceiling rose in polycarbonate 3 terminal brass flush type 6 Amps, 250 Volts, AC supply (ISI marked), fixed on & including 3 mm thick 75mm dia sunmica hylum plastic laminated round sheet complete all as specified and directed.

S&F stepped electronic fan regulator 230 Volts, flush type, complete all as specified and directed.

S&F in repairs, epoxy powder coated MCB distribution box double door SPN 8 way for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed. Note: - MCBs shall be measured and paid for separately under respective item of Schedule 'A'.

S&F MCB SPN, 32 Amps 230 Volts 'C' curve 10 kA, including necessary connection complete all as specified and as directed.

S&F MCB SP, 6 to 32 A, 230 V, 'C' curve, 10 kA, miniature circuit breaker (MCB), fixed in DB including necessary connection, testing and commissioning, complete all as specified.

S&F in replacement, indoor luminare batten for wall / ceiling mounting, box type, energy efficient saving LED batten light 20 watt including connection with & provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

S&F in replacement, angle holder (metal ring) PVC / polycarbonate type with back plate, suitable for batten fittings complete all as specified and directed.

S&F in replacement, LED light fitting, mirror type with high output diffuser 2 feet, 10 watt 220 Volt AC, decorative type with driver holder and LED lamp including connection with & provn of three core flexible copper conductor cable of suitable size from ceiling rose to tube light fitting complete all as specified and directed.

S&F in replacement, LED street light fitting, 20 watt 230 Volt AC, outdoor type with high pressure die cast aluminium hosing and heat resistant with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection and connection complete all as specified and directed.

Taking down existing unserviceable cable of any type and size and supply, laying and testing new 16 Sqmm 2 core XLPE insulated, screened, PVC bedded, galvanised steel strip or wire mounted, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor complete all as specified and directed.

Taking down existing unserviceable cable of any type and size and supply, laying and testing new 10 Sqmm 2 core XLPE insulated, screened, PVC bedded, galvanised steel strip or wire mounted, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor complete all as specified and directed.

ABC CONSTRUCTION CO

Khan Brothers

Jairajyadav security services

Saket Traders

R K BROTHERS

Abode Artisan Enterprises