ADDITION ALTERATION TO BUILDING NO 0205 OF RCI HYDERABAD

Amount

Taking out doors, windows and clerestory window shutters area nexc 3 Sqm (steel or wood) including stacking within 50 metres lead :

S&F of fixed louvered ventilator made out of multi chambered uPVC sections fusion welded joints with glazing bead with EPDM black gasket having isolated drainage and reinforced with galvanized iron profiles throughout the window. The outer frame having an overall size of (60mm x 36mm x 2.2mm)/(60mm x 58mm x 2.2mm) with reinforcement of 1.2mm thickness including 5mm thick frosted glass and stainless steel wire cloth, 0.36 mm nominal dia and average width of aperture 1.40 mm fixed complete all as specified and directed. Make: Aparna Venster or equivalent.

Providing and fixing Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) aluminium work for doors, windows, ventilators partitions and sliding shutter, including roller, handle locking arrangement with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required slicon etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer?in-charge.

Providing and fixing glazing With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing aluminium sliding door bolts 250 x 16mm, ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete

Providing and fixing 150x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing100x58x1.90 mm, ISI marked S.S. pressed butt hinges bright finished with necessary screws etc. complete

Providing and fixing 125mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete

Dismantling tile work thickness of tiles 10 mm to 25 mm in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing 1st quality ceramic glazed floor tiles of size 600x300 conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Dismantling 15 to 40 mm dia G.I. pipe Internal Work Exposed on wall including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer?in-Charge.

Providing and fixing of 15 mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints including oncealed work, including cutting chases and making good the walls etc.complete as per direction of Engineer in Charge.

Providing and fixing of 20 mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

ditto- but 25 mm dia nominal bore

S&F in repairs, 15mm bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

S&F in repair brass bib cock of approved quality 15mm dia complete all as specified and directed.

S&F in repair brass Two-in-one bib cock of approved quality 15mm dia complete all as specified and directed.

S&F in repairs, Providing and fixing 32mm dia PVC waste pipe flexible pipe for sink or wash basin including P.V.C. waste fittings complete with fittings of suitable length as per site requirement for WHB/Sink or urinal complete all as specified and directed.

S&F in repairs, Providing and fixing 100mm dia circular type PTMT grating of approved quality and colour.

Providing and fixing uplasticised PVC connection pipe 450mm long,15 mm nominal bore with brass unions complete all as specified and directed.

S&F in repairs, PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and as directed.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead complete all as specified and directed.

Providing and fixing P.V.C. low level flushing cistern 10 litres capacity white with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete complete all as specified and as directed.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed.

M&L for 15 mm cement plaster (with fine sand) on the rough side of single or half brick wall of mix cement mortar 1:6 (1 cement: 6 fine sand) complete all as specified and directed.

M&L two coats of distempering on new surfaces of walls/ ceiling with 1st qaulity acrylic distemper ( Ready mix) having VOC content less than 50 grams/litre of approved brand and manufacture to give an even shade over a coat of cement based 1mm thick putty of approved brand on walls/ceilling surfaces complete all as specified and as directed.

Providing and fixing PTMT stop cock of approved quality and colour,20 mm nominal bore, 89 mm long, weighing not less than 88 gms

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-inCharge

Providing & fixing White vitreous china padestal type water closet (Europeane type W.C Pan) with ISI marked white with solid Seat and lid, 10 Ltr low level white PVC flushing cistern, including flush pipe with manually controlled device (handle lever), confirming IS: 7231 with all fittings and fixtures complete, including cutting and making good of walls and floors wherever reqd, including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Providing & fixing White vitreous china water closet squatting pan (Indian type) orissa pattern W.C Pan of size 580x440 mm along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site with all fittings and fixtures complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Providing and fixing wash basin size of 550x400 mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require.

S&Fof in repairs vitreous china urinal, half stall type complete including urinal spreader providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and as directed by Engr-in-Charge.

S & F in repair for health faucet ( Jet) 1 m long chromium flexible tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as specified and directed by Engr-in-Charge. Make :- Jaquar cat part No-ALD-CHR-573.

S&F in repair for Stainless Steel Classy 6 Pin Door Wall Hooks. Complete all as specified and directed.

S&F in repairs, 15mm bore C.P. push cock for urinal of approved quality complete all as specified and directed. Make Jaquar cat part No CON-CHR-1081A.

S & F in repairs for Door closer hydraulically regulated cast iron body,designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

Providing and fixing factory made wood grain P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-Charge.

Providing and fixing factory made 30 mm thick wood grain PVC door shutters consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.

Painting with synthetic enamel paint two or more coats on old steel work of approved brand and manufacture on steel galvanised iron/ steel works complete all as specified and as directed.

Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 2 km lead as per direction of Engineer-in-charge.

Brick work with non modular fly ash bricks conforming to IS:12894,class designation 10 average compressive strength in super structure above plinth level up to floor V level in Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry in cement mortar 1:4 (1 cement : 4 coarse sand) with non modular fly ash bricks of class designation 10 confirmation IS-12894, in super structure above plinth and upto floor V level.

M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per anufacturer's specification.

M&L for specialised static conductive/dissipative self levelling floor toppin gwith following specification including takin doiwn/removal of existing damaged conductive flooring including screed acid etching soap water cleaning to remove oil grease and other contaminations and grinding the floor surface to remove the surface and undulations:-

(a) Cleaning of the surface by grinding/scarifying as per manufactures instruction. (b) Providing and applying one coat of epoxy primert with NITO PRIME 25 of M/S FOSROC or equivalent in BASE/CIPY. (c) Providing and applied 3mm thick of epoxy screed with NITO FLOOR EU5 of FOSROC or equivalent in BASE/CIPY. (d) Providing and fixiong copper strip of 100mricron thick and 25 mm wide and copper strip provided both sidesof floor average length 1.5mtr in each strip (1.5x1.5=2.25 sqm each). Note :-The self adhesive copper tape is struck at the peripheries of the floor and joinjted to both ground. All concrete slabs are electreically connected across thye expansion ahnd control joints by fixing copper tape. (e ) Providing and applying sgtatic conductive/dissipative self levelling base coat treatment. SL conductive under coat of FOSROC or equivalent in BASE/CIPY. (f) Providing and applying static conductive/dissipative self levelling top coat 2 mm thickness. SL Conductive top coat of FOSROC or equivalent in BASE/CIPY.

Dismantling of Cement concrete of any type manually/by mechanical means including of material disposal of material as per direction of Engr-in-Charge

Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering -

Demolishing RCC work manually/by mechanical means including stacking steel bars of material disposal of material as per direction of Engr-in-Charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 75 mm diameter conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 110 mm diameter conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing 75 mm bend on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Providing and fixing 110 mm bend on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Supply and fix on wall face coupler 75mm unplasticised-PVC moulded fittings/accessories for unplasticised rigid PVC rain water pipes confirming to IS: 13592 type "A" including jointing with the seal ring confirming to IS: 5382, leaving 10 mm gap for thermal expansion.

Supply and fix Single pushfit Coupler, 110mm dia

Single tee with door 75x75x75 mm

M&L two coats of Distempering on old surfaces of walls /ceiling with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade over a coat of cement based 1mm thick putty of approved brand on walls/ceiling surfaces complete all as specified and as directed.

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, urinal partition, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.

Taking down existing roof treatment including scrapping old bitumen layer complete of any description and removing of cement plaster/padding concrete on concrete surface of roof slab upto original roof slab including cleaning and disposal of debris off the premises complete all as directed.

M & L for preparation of concrete surfaces by brushing, cleaning and washing all the undulations, cracks, pores ,cleaned and sealed with PU sealant or crack seal properly and apply 1st coat of PU Magnum @ 750gram/Sqm over a coat of epoxy primer @ 200ml/sqm (laying 30-40 GSM Geotextile with 50mm side and end over laps on the layers wherever required and will be measured and paid seperately) and apply 2nd coat of PU Magnum over geotextile @500 grams/Sqm all as specified and as per manufacurers instructions and as directed Brand: Asian/Foxroc/Pedilite Note: The above item shall be executed by Auth manufacturer/auth applicator after taking prior approval from Engineer -in- Charge

Providing and fixing tiled false ceiling of GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 600 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 600 mm long spaced between main "T" at 600 mm center to center to form a grid of 600x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 600x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 1000 Ltrs: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes including disconnection damaged overhead/terrace PVC water storage tank of any size from water supply line removing from the terrace including shifting at ground level as per direction of Engr-in-charge, but without fittings and the base support for tank.

Supply, installtion commissiong of water cooler fully stainless steel electric driven single phase having approx, storage of 80 litre and nominal cooling capacity 40 litre per hour all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA

Supply, installation, testing and comissioning of 2 TR Capacity 230V, 50Hz, single phase Split type Air conditioning unit, 5 star rating, inverter type complete with drive motor, air cooled condenser with all accessories, varied speed and dual rotary compressor, including fixing the outdoor units as per manufacturer's recommendation and fixing of indoor (high wall) unit on wall, providing and marking interconnection including sufficient length refrigerant piping with nitryle rubber insulation and control cable from indoor unit to outdoor unit up to a distance of 3.0 mtr, power cabling (max 3.0 mtr from isolator/enclosure) to unit, first charging of refrigerant gas (R32) including cordless remote control unit, drain piping of 25 mm dia for connecting drain lines from indoor unit to maximum of 3.0 mtr to nearest drain points, outdoor support stand etc., complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 05 KVA

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Wiring for circuit/ submain wiring alongwith earth wire with 2 X 4 sq. mm + 1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Supplying and fixing following modular switch 6A on the existing modular plate & switchbox including connections but excluding modular plate etc. as required.

Supplying and fixing following modular socket 2 module 3/5 pin 6A on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following modular switch 16A on the existing modular plate & switchbox including connections but excluding modular plate etc. as required.

Supplying and fixing following modular socket 2 module 3/6 pin 16A on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 3 Module (100mmX75mm) modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing 4 Module (125mmX75mm) modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing 6Module (200mmX75mm) modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing 8Module (125mmX125mm) modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing 12Module (200mmX150mm) modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required

S&F ceiling rose two to three terminal surface backelite type AC 50 HZ 230 Volt.

S&F Modular fan step regulator, 120W - 2 Module, complete.

S&F CRCA sheet metal enclosure with metal clad plug and socket single phase with three pin and earth plug & socket suitable for surface/flush mounting 240 V, 20 Apms capacity controlled by and including one 20 Amps MCB SP, 10 KA capacity complete.

Supply and fixing in repairs Single pole and neutral Sheet metal enclosure 8 way double door for MCB’s, Phosphatised Powder Painted with Bus Bar 200 amp rated, 240 volt AC complete.

S&F in repairs sheet metal enclosure for pre wired distribution board double door, powder coated VTPN, 12 way with out MCCB, three phase 415 volt with 200 Amps rated tinned electrolytic copper bus bar with neutral link complete.

S&F in repairs sheet metal enclosure for pre wired distribution board double door, powder coated VTPN, 8 way with out MCCB, three phase 415 volt with 200 Amps rated tinned electrolytic copper bus bar with neutral link complete.

S&F in replace of unserviceable MCCB TPN 200 Amps capacity 36KA 415Volts 50 HZ complete.

S&F in replace of unserviceable MCCB TPN 125 Amps capacity 36KA 415Volts 50 HZ complete.

S&F MCB in repairs Single pole and neutral 32 Amps capacity 10 KA 240 Volts 50 HZ complete.

S&F in repairs MCB single pole (SP) 10 kA of 6 Amps to 32 Amps capacity 240 Volts 50 HZ complete.

M&L for sub main wiring complete with 4 runs of 6 sq.mm PVC insulated and unsheathead 1100V grade FRLS multistranded copper conductor and drawn through in and including PVC conduit of medium grade and condiut accessaries of suitable size concealed in walls with, necessary civil works for making good distrubed surface, and/or laid on surfaces over ceilings/columns etc and connecting terminal ends to DBs and DB's including of 2 run of 6 Sq.mm insulated multistanded FRLS copper cable as earth continuity conductor and connecting to common earth dolly including taking down old one complete all as specified and directed (Sub BDs). Note;- (i) Four runs of 6 Sq.mm copper conductor, two run of 6 sq.mm copper earth continuity conductor and one run of suitable size of PVC rigid conduit and required conduit accessaries shall be measured as one unit length.

M&L for sub main wiring complete with 4 runs of`10 sq.mm PVC insulated and unsheathead 1100V grade FRLS multistranded copper conductor and drawn through in and including PVC conduit of medium grade and condiut accessaries of suitable size concealed in walls with, necessary civil works for making good distrubed surface, and/or laid on surfaces over ceilings/columns etc and connecting terminal ends to DBs and DB's including of 2 run of 6 Sq.mm insulated multistanded FRLS copper cable as earth continuity conductor and connecting to common earth dolly, including taking down old one complete all as specified and directed (Sub BDs). Note;- (i) Four runs of 10 Sq.mm copper conductor, two run of 6 sq.mm copper earth continuity conductor and one run of suitable size of PVC rigid conduit and required conduit accessaries shall be measured as one unit length.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized Strip 32 x 6mm by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I and including taking down old one complete.

Supplying, laying, jointing, testing and commissioning 1100 volts grade, 185 Sqmm 3.5 core LT XLPE insulated, PVC sheathed as per IS-7098 (Part-I), 1988 galvanized steel strip or wire armoured, heavy duty, electric cables, with multistranded aluminium conductor laid in trenches/ passing through pipe/duct/road crossing or fixed on poles, walls with suitable size clamps made out of mild steel flat iron including jointing material such as crimping type lugs, brass cable glands, heavy duty double compression type etc., including taking down unserviceable cable complete all as specified and directed. Note : Earthwork Excavation, sand cushioning GI pipe and cable protection will be measured and paid separately.

All as per item No. 97 above 3.5 core 120 Sqmm

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 mtr depth for laying cable at and getting out in soft/loose soil all as specified and directed.

Returning, filling in soil including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick all as specified and directed

Removing surplus soil to a distance not exceeding 50 Mtr and deposited at a level not exceeding 1.5 mtr above from the starting point all as specified

Supply and spread sand in trenches for cable cushioning including watering and consolidation all as specified Note : For the purpose of payment punned thickness only will be measured.

Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

M&L for cutting of existing bituminous/PCC road or flooring/plinth protection laying of GI pipe in intersection for passing of LT XLPE cable including excavation in any type of soil returning filling in and making good top 30 cm of the trench by providing PCC 1:2:4 typ-e B1 using 20mm graded stone aggregate to flush with existing road surface complete all as directed.

S&Fin repairs 80mm dia GI pipe light grade fixed to walls/poles or laid in trenches, road crossing etc., for protection of underground cable/earth strip including sealing ends with hessian cloth impregnated with bituminous compound in ground and with teak wood bushes for ends fixed on walls/poles complete all as specified and directed.

S&F in replacement, recess mounting 42W, 2x2 LED luminaire suitable for Armstrong/Grid ceiling with high performance LEDs complete with all accessories including driver pre-wired complete all as specified.

PAVAN ENTERPRISES (BID ID -3501045)

VAISHNOVI CONSTRUCTIONS (BID ID -3500928)

MM PROJECTS (BID ID -3500445)

M/s K Venkateswara Rao (BID ID -3500585)

M/S K.SANJEEVA REDDY (BID ID -3499828)

CHITRA ENGINEERING CORPORATION (BID ID -3500780)

TECHNO SOFT SOLUTIONS (BID ID -3508525)