Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹9.1 Cr
EMD Value
₹18.3 L
Closing Date
3 Dec 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
GENERAL
24 conditions · 5 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) Attested Certificates(s) issued by Executive or Nominated Authority of the government Departments or Semi-Government/Public Sector Undertakings for the value of the work done for them during the qualifying period including current financial year certifying the bill amounts paid Agreement-wise and Date-wise or attested photo copy of such certificate. Such certificates will be accepted only from Govt. / Govt. bodies / PSUs authorities. Certificates issued by Private Bodies will not be considered.
NOTE: (i) Financial Year shall normally, be reckoned as 1st April to 31st March of the Next Year. However, for Turnover Criteria, the Financial Year as applicable to the Company /Tenderer is to be considered, if it defers from the above. (ii) Current Financial year is reckoned as the incomplete Financial year in which the date of tender submission falls. (iii) Chartered Accountant statements duly indicating yearly receipts will not be considered until and unless backed by Audited Balance Sheets or Provisional Balance sheet. (iv) (v) If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained.
If JV firms are allowed to participate; Financial eligibility of the JV Firm shall be adjudged based on satisfactory fulfillment of the Para No.17.15.2 of J.V guide lines of IRSGCC April - 2022 [with up to date correction slip].
Definition of similar work: a. Any Civil Engineering work having RCC component (Value of component in tender Rs. 6,04,88,670) and b. steel structure work (Value of component in tender Rs. 3,09,21,407). Tenderer should have valid Electrical Contractor's License in his/their name or he should give an undertaking that he will engage capable agencies for Electrical work who has the valid Electrical Contractor's license in his/their own name. Note: Single or Separate completed work of minimum required value shall be considered for fulfilment of Technical Eligibility Criteria for above two different components (1. RCC component and 2. Steel Structure Work Component) as per para 10.1 of IRSGCC 2022.
78 conditions · 29 needing a document upload
Uploading of Proforma -18 attached with Tender document (Certificate signed by Tenderer and Chartered Accountant), w he n balance sheet for the first previous year is yet to be prepared/ audited.
Proforma-16 for self-certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement order value less than of Rs. 10 Crores. OR Proforma-17 for Certificate from the statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores. Provisions of Make in India Policy 2017 (revised during 2024 vide Department for Promotion of Industry and Trade, Ministry of Commerce and Industry's letter No. P-45021/2/2017-PP (BE-II)-Part(4)Vol.II dated 19.07.2024) issued by Govt. of India, as amended from time to time, shall be followed for consideration of tenders.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
(i) The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii) documents shall be submitted according to clause 14 of IRGCC 2022:
This tender complies with PUBLIC PROCUREMENT POLICY ORDER-2017 dated 15.06.2017. Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions. Provisions of Make in India Policy 2017 issued by Govt. of India, as amended from time to time, shall be followed for consideration of tenders.
The General Conditions of Contract governing the performance of the works covered by this tender are the Indian Railway Standard General Conditions of Contract [IRSGCC] as amended from time to time up to date. A soft copy of the Indian Railway Standard General conditions of Contract is uploaded in the attached documents to the tender for reference. Hard copy of IRSGCC (with up-to-date correction slip) may be perused in the office of the Principal Chief Engineer Officer/ South Western Railway / Hubballi - 580020. The tenderer/s is/are deemed to have kept himself/themselves fully Informed of the provisions of the IRS General conditions of Contract including all corrections and Amendments issued up to date while submission of offer and any claim that he/they is/are not aware of any amendment or correction slip to the IRSGCC shall not be entertained.
STUDY OF DRAWINGS AND LOCAL CONDITIONS: The drawings for the works can be seen in the office of the General Manager/Divisional Railway Manager. It should be noted that these drawings are meant for general guidance only and Railway may suitably modify them during the execution of work according to the circumstances without making the Railways liable for any claims on account of such changes. If there is any variation between the description in the tender and the detailed plans, the Engineer-in-Charge will operate the correct description and his decision is final and binding on the tenderer/ Contractor. The Tenderer/Contractor is required to inspect the sites of works and acquaint himself with the site conditions, availability of approaches for transporting of men and materials, space and other factors relating to the works, availability of labour, electricity and water, etc., before quoting his rates. The extent of lead and lift involved in the execution of works and any difficulties involved in the execution of work should also be examined before formulating the rates for complete items of works described in the schedule. The Tender submitted will be deemed to have been made after such inspection.
DRAWINGS FOR WORKS: The percentage rates for the schedule items and itemized rates for the non-scheduled items quoted by the tenderer as may be accepted by the railways will, hold good irrespective of any changes, modifications, alterations, additions, omissions in the locations of structures and detailed drawings, specifications and/or the manner of executing the work. It should be specifically noted that some of the detailed drawings may not have been finalized by the Railway and will, therefore, be supplied to the contractor as and when they are finalized on demand. No compensation whatsoever on this account shall be payable by the Railway Administration. No claim whatsoever will be entertained by the Railway on account of any delay or hold up of the works arising out of delay in approval of drawings, changes, modifications, alterations, additions, omission and the site layout plans or detailed drawings and design and/or late supply of such material as are required to be arranged by the Railway or due to any other factor on Railway Accounts.
Manual tenders, supporting documents etc., sent by Post/FAX/Courier or in Person SHALL NOT BE ACCEPTED.
All requisite documents are to be properly submitted online only and the bidders should ensure that the content of the documents uploaded is distinctly legible /readable.
CORRIGENDUM NOTICE ON IREPS: Railway may modify the tender document by issuing online corrigendum through "www.ireps.gov.in" 15 days prior to the tender closing date. For the purpose of CORRIGENDUM in the tender, NIT period is splitted as under: (a) ADVERTISEMENT PERIOD: The time during which all information pertaining to tender shall be available but offers cannot be submitted (b) OFFER SUBMISSION PERIOD: 15 days prior to closing of tender, during which tenderers can submit their offer.
If the Bid of a Tenderer is seriously unbalanced in relation to the Engineer's estimate of the cost of work to be performed under the contract, the Railways may require the tenderer to produce detailed price analysis for any or all items of the Tender Schedule, to demonstrate the internal consistency of those prices with the construction methods and schedule proposed.
No Technical and Financial credentials are required for tenders having value up to Rs 50 lakh. For tenders valuing more than Rs. 50.00 lakh: The offer of Tenderer(s) who do not enclose Experience Certificate & Turnover Certificate with requisite details, and supporting documents along with their Tender to establish their credentials shall be summarily rejected, even though they are working contractors or contractors on approved list.
The offer shall be evaluated only from the certificates/documents submitted along with the tender offer.
Any Certificate /Documents offered / submitted /received after the tender opening shall not be given any credit and shall not be considered.
Attestation of documents may be self attested or attested by a Gazetted Officer.
Railwayreservestherighttoverifythe authenticityofthe documents/information furnished.
IRSGCC para 6.0 of part-I (a)(ii) Tenderers will examine the various provisions of The Central Goods and Services Tax Act, 2017(CGST)/ Integrated Goods and Services Tax Act, 2017(IGST)/ Union Territory Goods and Services Tax Act, 2017(UTGST)/ respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt.& as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates. (a)(iii) The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/ UTGST /SGST Act to railway immediately after the award of contract, without which no payment shall be released to the Contractor. The Contractor shall be responsible for deposition of applicable GST to the concerned authority. (a)(iv) In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/ SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority. (b) When work is tendered for by a firm or company, the tender shall be signed by the individual legally authorized to enter into commitments on their behalf. (c) The Railway will not be bound by any power of attorney granted by the tenderer or by changes in the composition of the firm made subsequent to the execution of the contract. It may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
Increase/decrease of TAXES: if rates of existing GST or cess on GST for Works Contract is increased or any new tax /cess on Works Contract is imposed by Statute after the date of opening of tender but within the original date of completion/date of completion extended under clause 17 & 17A and the Contractor thereupon properly pays such taxes/cess, the Contractor shall be reimbursed the amount so paid. Further, if rates of existing GST or cess on GST for Works Contract is decreased or any tax/cess on Works Contract is decreased / removed by Statute after the date of opening of tender, the reduction in tax amount shall be recovered from Contractor's bills/Security Deposit or any other dues of Contractor with the Government of India.
Fixed Deposit Receipts (FDRs) submitted after award of tender towards Security Deposit/Performance Guarantee should be with automatic renewal facility only.
CONSORTIUM AGREEMENTS AND MOUS SHALL NOT BE CONSIDERED FOR PARTICIPATING IN THIS TENDER.
Tenderer(s) shall note that conditional/alternate offer will not be considered and will summarily be rejected, even though such condition makes them as the lowest tenderer.
Shramik kalyan While processing payment of any 'On Account Bill' or 'Final Bill' or release of 'Advances' or 'Performance Guarantee / Security deposit', contractor shall submit a certificate to the Engineer or Engineer's representatives that "I have uploaded the correct details of contract labours engaged in connection with this contract and payments made to them during the wage period in Railway's Shramik kalyan portal at 'www.shramikkalyan.indianrailways.gov.in' till ____Month, ____Year.
Date of inviting tender shall be the date of publishing tender notice on IREPS website if tender is published on website or the date of publication in newspaper in case tender is not published on website.
Sr. DEN/West/SBC sec : KSR Bengaluru: Balance work for the Proposed construction of sports complex including electrical portion near MG Colony cricket ground at KSR Bengaluru. Maintenance period is 36 months. (Composite tender)
30SBC26OF06-11-26Item-01~SWR
30SBC26OF06-11-26Item-01
Open
Works - General
10 Months
Unknown (Unspecified Location)
₹0
₹18.3 L
6 Nov 2026
6 Nov 2026
19 Nov 2026
335 items across 11 schedules · ₹3,55,04,868.43 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| Gym Rubber Cushion Pads: Supply and installation of high-density rubber cushion pads designed for use in gymnasiums and fitness centers, intended to protect flooring, absorb shock, and reduce vibration and noise from heavy equipment and free weights. The pads shall be manufactured from vulcanized recycled rubber granules or SBR/EPDM composite material bonded with polyurethane resin under controlled pressure and temperature. Each pad shall have a thickness of 20-25 mm (±2 mm) and be available in sizes of500 mm x 500 mm or 1000 mm x 1000 mm, with a density of 950-1050kg/m³ and hardness between 60-70 Shore A. The material shall have atensile strength of 1.0 MPa, elongation at break 100%, and compression set 10%, ensuring durability and long-term performance under dynamic loads. The pads shall exhibit impact absorption capacity of at least 60%, and provide a noise reduction value (Lw) of 20-25 dB, effectively minimizing vibration transmission to adjacent areas .Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. | Sqm | 108.00 | 1,904.52 | 2,05,688.16 | |
| 2 | EPDM flooring: The flooring shall be made from high-quality EPDM rubber, designed specifically for gymnasiums, fitness centres, and heavy-duty workout zones. Each tile/roll shall consist of a top layer of virgin EPDM granules bonded with a recycled SBR rubber base using polyurethane resin under high pressure and temperature. The flooring shall have a total thickness of 15 mm (±0.5 mm) and provide excellent impact absorption, anti-slip performance, and sound dampening suitable for free-weight and high-intensity activity areas. The material shall exhibit a density of 950- 1100 kg/m³, tensile strength 1.0 MPa, elongation at break 150 %, and hardness 60-70 Shore A. It shall be abrasion- resistant ( 300 mm³) and non-slip (coefficient 0.7dry/wet), ensuring safety and long-term durability. The surface shall be resistant to water, oils, sweat, and cleaning agents and maintain structural integrity under heavy static and dynamic loads. Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. | Sqm | 140.00 | 4,443.88 | 6,22,143.2 |
| 3 | Rubber gym mats:Supply, delivery, and installation of high-density recycled rubber gym flooring mats of 15mm nominal thickness, suitable for use in commercial gymnasiums, fitness centres, and heavy-impact workout areas. The mats shall be manufactured from 100% recycled SBR rubber granules bonded with polyurethane binder, optionally finished with 10-15% EPDM granules for enhanced appearance. Each mat shall be of size 1000mm x 1000mm(±2mm), with a density of 900- 1000 kg/m³ and hardness between 60-70 Shore A. The material shall have a tensile strength of not less than 1.0MPa, elongation at break of at least 100%, compression set 10%, and impact absorption of minimum 50% as per EN 14808/ASTM F2772. The surface shall be non-porous, matte, and anti-slip, with slip resistance coefficients of 0.9 (dry) and 0.7 (wet) as per ASTM D2047. The mats shall have water absorption 1.5%, be fire resistant as per EN 13501-1 Class E, and operationally stable between -30°C and +80°C. Each mat shall weigh approximately 15-16 kg/m², with precision-cut straight or interlocking edges ensuring tight joints and minimal gaps. The product shall be odor- controlled, non-toxic, anti-fungal, and compliant with RoH Sand REACH standards. Installation shall be carried out over a level, dust-free, and moisture- free sub floor using PU or rubber-based adhesive where required, ensuring an even and continuous finish free from undulations. The mats shall withstand repeated heavy-impact loads up to 150 kg and provide a minimum 20 dB noise reduction on drop impact. Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. | Sqm | 558.00 | 1,904.52 | 10,62,722.16 |
| 4 | "PP tile for ice bath: Supply and installation of PP Tiles with Edge & Corner Pieces for basket b1.LOAD CAPACITY: 20TON / TILE2. TILE HEIGHT: 15.70 MM3. TILE SIZE: 1FTX 1 FT4.LAYER: DOUBLE LAYER 5.SHOCK ABSORBING DESIGN 6. SUPERIOR GRIP - SLIP RESISTANCE 7.MULTISPORT TILE, ANY SPORTS CAN BE PLAYED ON IT.8.RAW MATERIAL: 100% VIRGIN MATERIAL 9. WARRANTY: 5 YEARS10.3 YEAR COLOR WARRANTY 11.EASY TO WASH 12.NO MAINTENANCE1 3.EASY TO INSTALL AND NO NEED FOR ADHESIVE 14. PRODUCT LIFE EXPECTANCY: MORE THAN 10 Years 15.COLOURFUL & ATTRACTIVE APPEARANCE 16.NO SMELL OR ODOURLESS PRODUCT 17.REDUCES SPRAIN & STRAIN DURING SPORT 18.ANTI BACTERIAL"" 19. Weight - 300 Grams. Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. | Sqm | 73.00 | 1,523.62 | 1,11,224.26 |
| 5 | MMA interlocking mats 25mm:The supplier shall provide interlocking martial-arts flooring tiles of size 1.0metre x 1.0 metre, with a nominal thickness of 25 mm (±2 mm tolerance).The core material shall be high-density EVA foam or equivalent synthetic foam engineered for martial- arts usage, with a hardness around Shore A35-40, and finished with an anti- slip textured surface suitable for barefoot or sports-footwear use. The tiles shall feature a puzzle-style interlocking edge system enabling secure, stable installation without adhesive, and shall be reversible (dual-colour) for zone designation or aesthetic variation. The mats shall be water-resistant, easy to clean, shock-absorbing to reduce impact injury risk, and suitable for MMA, judo, karate, taekwondo and other combat- sports training. The supply shallinclude sufficient quantity to cover the required training area (specifyarea), and installation instructions shall be provided. The flooring shall comply with all applicable safety, fire and environmental standards for indoor sports flooring in India. Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. | Sqm | 101.00 | 2,539.36 | 2,56,475.36 |
| 6 | Badminton Flooring: Product Description - Badminton Mat (Li-ing, 4.5mm) With Supply & Installation The Sun Sports 4.5mm Badminton Mat is engineered for superior durability, performance, and player safety. It features a multi-layered construction designed to provide excellent wear resistance, stability, and comfort during play. Key Features: High- Density PVC Surface (90%) - Wear- resistant and anti-slip layer ensuring optimal grip and long-lasting performance. Compression Resistance Layer - High-density layer designed to maintain surface integrity and provide excellent shock absorption. Polyester Stabilizer Layer - Reinforced with high- density polyester for enhanced dimensional stability and durability. Waterproof & Movement-Resistant Bottom - Prevents moisture penetration and minimizes mat displacement during use. Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. (Rate analysis enclosed) | Each | 2.00 | 5,57,999.58 | 11,15,999.16 |
| 7 | "Badminton Foam: Product Description - EVA Foam Underlay (5 mm)The 5 mm EVA (Ethylene-Vinyl Acetate) Foam Underlay is designed as a cushioning layer beneath the badminton mat system to enhance player comfort, reduce joint stress, and improve overall surface performance. It provides excellent impact absorption, dimensionaltability, and moisture resistance for long-lasting use in indoor sports applications. Key Specifications: Material: Closed-cell EVA (Ethylene-Vinyl Acetate) foam with high resilience and durability. Thickness: 5 mm nominal. Density: Approximately 80- 200 kg/m³, depending on grade and specification. Structure: Closed-cell design ensuring consistent cushioning and impact resistance. Shock Absorption: Excellent energy absorption properties to reduce stress on knees and joints during play. Compression Resistance: Retains shape and elasticity under repeated load cycles. Thermal Insulation: Provides an insulating layer that helps maintain comfortable surface. Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. (Rate analysis enclosed)" | Sqm | 768.00 | 698 | 5,36,064 |
| 8 | Extra Flooring:4.5mm High density PVC mat including installation and welding with two years warranty Brand:Sun sports.Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. | Sqm | 96.00 | 1,523.62 | 1,46,267.52 |
| 9 | Cushion pads for Badmintion Flooring:10mm EVA foam.Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. | Sqm | 315.00 | 317.42 | 99,987.3 |
| 10 | "Sports Flooring: The Sun Sports 4.5mm Table Tennis Mat is engineered for superior durability, performance, and player safety. It features a multi-layered construction designed to provide excellent wear resistance, stability, and comfort during play.Key Features: High- Density PVC Surface (90%) - Wear- resistant and anti-slip layer ensuring optimal grip and long-lasting performance. Compression Resistance Layer - High-density layer designed to maintain surface integrity and provide excellent shock absorption.Polyester Stabilizer Layer - Reinforced with high- density polyester for enhanced dimensional stability and durability. Waterproof & Movement-Resistant Bottom - Prevents moisture penetration and minimizes mat displacement during use. Double Foam Layer - High-density foam structure offering superior resilience, comfort, and impact absorption.This premium multi-layered construction ensures exceptional playability, safety, and longevity, making it ideal for professional badminton courts and high-performance sports environments.Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. | Sqm | 113.00 | 1,904.52 | 2,15,210.76 |
| 11 | Dance Floor:Supply and installation of engineered wooden dance flooring comprising a top layer of 0.5 mm thick natural walnut veneer bonded to a pinewood base layer, with a total finished thickness of 11 mm (±0.5 mm). The planks shall be factory-pressed under high temperature and pressure using non-toxic adhesive layers to ensure structural stability, uniform density, and long-term durability suitable for professional dance studio applications. The flooring shall be provided with an integrated lock-and-key interlocking system, eliminating the need for glue or nails during installation, thereby enabling a clean, floating-floor system with precision joint alignment.Each plank shall be dimensionally stable with moisture content between 8-10%, and treated to resist warping, cupping, and termite attack. The walnut veneer surface shall be UV-cured with a matte lacquer finish, ensuring high wear resistance, easy maintenance, and excellent aesthetic appeal suitable for contemporary studio interiors. The pinewood base shall provide optimal flexibility and shock absorption, enhancing comfort and safety for dance performance.Installation shall be carried out on a levelled and moisture-protected subfloor with an appropriate underlay or vapor barrier sheet, ensuring uniform support and acoustic control. No skirting or beading shall be provided, and all edge finishes shall be neatly aligned flush with adjoining surfaces as approved by the Engineer-in-Charge. standards for engineered wood flooring, and delivered complete with manufacturer's data sheets and test certificates.Finish: Natural Walnut veneer, semi-matte UV lacquer. Thickness: 11 mm (0.5 mm veneer + 10.5 mm pinewood base).Installation System: Lock-and-key click system, glue-free. Measurement: Per square meter (m²) for complete installation including all accessories and labor.Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. | Sqm | 19.00 | 9,522.6 | 1,80,929.4 |
| 12 | "Yoga Flooring:Supply, delivery, and installation of laminate wooden flooring made of high-density fibreboard (HDF) core with a decorative top layer and protective melamine wear coating, having a total thickness of 8 mm (±0.2 mm). Each flooring plank shall comprise a multi-layer construction consisting of a transparent abrasion-resistant overlay, decorative printed layer (color/pattern as approved), high-density core (HDF, 850 kg/m³), and a balancing bottom layer for dimensional stability. The top surface shall be factory UV-cured and polished to provide a smooth, anti-scratch, and stain-resistant finish, ensuring durability and easy maintenance under frequent foot traffic.The flooring shall conform to AC4 or higher abrasion class as per EN 13329 standards, with a surface wear resistance 4,000 cycles (Taber test), impact resistance 15 N, and moisture swelling 10%. The panels shall have a locking system (click or tongue-and- groove type) enabling glue-free, floating installation with tight joints and uniform alignment. The material shall be anti- static, fire-retardant (EN 13501-1, Class Cfl-s1), and resistant to UV fading, household chemicals, and indentation.The flooring shall be installed over a leveled and moisture-protected subfloor, with a 2 mm foam or EVA underlay for acoustic and thermal insulation. Joints shall be staggered and aligned neatly. The system shall not require any glue or nails, ensuring quick and clean installation. Color, texture, and finish shall be selected by the Engineer- in-Charge from the approved sample range.Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. | Sqm | 39.00 | 4,443.88 | 1,73,311.32 |
| 13 | Providing and fixing of translucent polycarbonate facade system with multicell polycarbon structures (paid separately). The panel width shall be 900mm to ensure best performance core with softlight finish to provide diffused light. In a cross section, the core shall be convex in appearance. The panels shall be coextruded with UV Protection layers with thickness a through a clear panel. The weight of the only panel shall not be less than 3250 gram . transmission of less than 0.1% with UV filtration test AS No.1067-1990.The panel should achieve minimum sound absorption level 20 DB with third party Test on polycarbonate connector to interlock the panels with a grip-lock 2 tooth locking.25,000 hours of environmental exposure. The panel system shall pass water penetration as per test standard EN 13501 - 1:2002 tested by an independent, recognized testing lab shall not be more that 10 points after 60 months of exposure in comparison to original. 60 months of exposure in comparison to original. The Light Transmission of panels shall The panels shall pass the cyclone test in accordance with BCA 2009 and conforming to on facade system that is attached to MS supporting structures (paid separately) with polycarbonate connectors. The panel system shall have specially made bottom frame panel with provision for water drainage. The facade system shall have spacer made of al.The system shall also have specially designed end profiles in anodized aluminium finish perforated tape / end caps / aluminium U Profile (mill finish) as needed as per design. The ISO 14001. Translucent polycarbonate facade system shall be manufactured by a company systems using polycarbonate panel systems for a period of at least Twenty (20) years an submitted before supplying the material to Engineer in Charge.Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. (Rate analysis enclosed) | Sqm | 605.00 | 13,428.48 | 81,24,230.4 |
| 14 | Children play area foam pads:The supplier shall provide interlocking flooring tiles of size 1.0 metre x 1.0 metre, with a nominal thickness of 10 mm (±2 mm tolerance). The core material shall be high-density EVA foam or equivalent synthetic foam engineered for martial-arts usage, with a hardness around Shore A 35-40, and finished with an anti-slip textured surface suitable for barefoot or sports-footwear use. The tiles shall feature a puzzle-style interlocking edge system enabling secure, stable installation without adhesive, and shall be reversible (dual-colour) for zone designation or aesthetic variation. The mats shall be water-resistant, easy to clean, shock-absorbing to reduce impact injury risk, and suitable for kids. The supply shall include sufficient quantity to cover the required training area (specify area), and installation instructions shall be provided. The flooring shall comply with all applicable safety, fire and environmental standards for indoor sports flooring in India.Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. | Sqm | 30.00 | 1,523.62 | 45,708.6 |
| 15 | "Paddle Ball Court :Supply and Installation of Paddel tennis in Panoramic Model. It includes:- 12mm EF Padel Pro Turf.- 12mm Toughened Glass in Panoramicalsides and bottom in 3.00 MTR Glass.- Corner Pillars.- GI Tube 100.00 x 55.00 x 3.00 MM in panoramical areas.- GI Tube 75.00 x 25.00 x 2.50 MM insideareas / Partitions.- Electro welded mesh 50.00 x 50.00 x 5.00 MM- Inti-injury system- Curved lighting system includes 8 Nos. ofEF Antiglare LED lights.- Stove-finished painting (the client chooses the colour)- Post & Net- Padding on Entrance and Post.- Installation.Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. | Each | 1.00 | 23,60,000 | 23,60,000 |
| 16 | Paddle ball net :The net shall measure approximately 6.63 m (21 ft 9 in) in length (post-to-post span) and have a height of 0.91 m (36 in) at the sidelines/posts and 0.86 m (34 in) at the centre. The net body shall be woven from high-strength synthetic mesh fabric (polyethylene or polypropylene) with openings sufficiently narrow so the ball/puck cannot pass through. The top edge shall feature a white binding tape of a minimum width of 50 mm, enclosing a steel cable or heavy-duty cord for tensioning. The net ends shall be fully attached to the posts with no gaps. The net material shall be treated for UV- resistance, weather-proofing, and abrasion resistance, suitable for outdoor use if required. Posts and tensioning hardware shall provide firm and stable installation with adjustable tension straps or turnbuckles to ensure the net maintains correct height and tightness during play..Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. | Each | 1.00 | 2,950 | 2,950 |
| 17 | Squash court:-Providing and laying squash court wooden flooring as per following steps, Polythene sheet on top of concretecushion pads nailed to pine wood (10mm) pine wood of 32mm/45mm thick treated placed at 350mm intervals hard wood. Matting installed over the pine wood (20mm) should be WSF approved sanding/grinding to be done on hardwood. Once installed , providing and laying of hard plaster consist of plaster(4mm), fiber reinforced cement based and resin modified. MArking lines in red colour and painting with epoxy paint approved by WSF. Cost inclussive of supply of material, installation, transportation, workmanship,Squash Hard plaster- Providing and laying of hard plaster consist of plaster 4mmthick , fiber reinforced, cement based and resin modified. Marking lines in red colour and painting with epoxy paint . Approved by WSF. Work shall be executedas per direction of Engineer-in charge. Cost inclussive of supply of material, installation, transportation, workmanship, GST etc.,. Work should be carried out as per the instructions of Engineer-in charge, No additional payment will be made for altrations/replacement works during the execution.Squash court glass- Providing & fixing rear 4 panel glass wall with a door of 12mmthick with 15mm fins inclussive of all required accessories & hardwares approvedby WSF. Size of glass wall (21 ft *7 ft).Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. | Each | 1.00 | 26,41,199.9 | 26,41,199.9 |
| 18 | "Carrom Stand:The stand shall be constructed from high-grade steel and iron sections to provide maximum strength and durability. The stand shall have a foldable, portable, andlightweight design suitable for easy setup, transport, and storage. All components shall be coated with black rust-free paint to prevent corrosion andensure long service life under indoor conditions. The structure shall be designed with cross- support bracing for enhanced stability anduniform load distribution. Each joint shall be fitted with anti-slip rubber caps to protectflooring and prevent movement during play. The stand shall be compatible with all standard and full- size carrom boards andcapable of safely supporting tournament-grade boards.Features: Material: Steel and Iron combinationFinish: Rust-free black powder-coated paint Type: Foldable and Portable Structure: Cross-braced design for stability Usage: Suitable for institutional, recreational, and professional carrom setups.Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. | Each | 2.00 | 4,130 | 8,260 |
| 19 | Spinning Room Wooden Flooring:Supply, delivery, and installation of laminate wooden flooring made of high-density fibreboard (HDF) core with a decorative top layer and protective melamine wear coating, having a total thickness of 8 mm (±0.2 mm). Each flooring plank shall comprise a multi-layer construction consisting of a transparent abrasion- resistant overlay, decorative printed layer (color/pattern as approved), high- density core (HDF, 850 kg/m³), and a balancing bottom layer for dimensional stability. The top surface shall be factory UV-cured and polished to provide a smooth, anti-scratch, and stain-resistant finish, ensuring durability and easy maintenance under frequent foot traffic.The flooring shall conform to AC4 or higher abrasion class as per EN 13329 standards, with a surface wear resistance 4,000 cycles (Taber test),impact resistance 15 N, and moisture swelling 10%. The panels shall have a locking system (click or tongue- and-groove type) enabling glue-free, floating installation with tight joints and uniform alignment. The materialshall be anti-static, fire-retardant (EN 13501-1, Class Cfl-s1), and resistant to UV fading, household chemicals, and indentation.The flooring shall be installed over a leveled and moisture-protected subfloor, with a 2 mm foam or EVA underlay for acoustic and thermal insulation. Joints shall be staggered and aligned neatly. The system shall not require any glue or nails, ensuring quick and clean installation. Color,texture, and finish shall be selected by the Engineer- in-Charge from the approved sample range.Cost to including all necessary lead and lifts as required with contractors men & materials etc. complete as approved and directed by Engineer in charge. | Each | 1.00 | 885 | 885 |
| Schedule total | ₹1,79,09,256.5 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
acs12_1.pdf
ATTACHMENT
GCCACS.pdf
ATTACHMENT
TenderDocument6.1dated23.09.2023and07.07.2025and24.07.2025._1.pdf
ATTACHMENT
NEFTForm.pdf
ATTACHMENT
IRGCCApril2022.pdf
ATTACHMENT
ACS-6.pdf
ATTACHMENT
ACS-5toGCC2022.pdf
ATTACHMENT
Instructionstobidders.pdf
ATTACHMENT
GCC2022ACS-3_20230426_1141401.pdf
ATTACHMENT
ACS-2toGCC-2022_2022-CE-1-CT-GCC-2022-POLICY_13.12.20221.pdf
ATTACHMENT
ACS7.pdf
ATTACHMENT
bidcapacityformat-1-2.pdf
ATTACHMENT
JPOCablecuts.pdf
ATTACHMENT
Proforma-161718.pdf
ATTACHMENT
ACS-9dated.09.01.2025.pdf
ATTACHMENT
acs10.pdf
ATTACHMENT
Order-deptforpromotionofindustryandtrade.pdf
ATTACHMENT
Tenderdoc-sportscomplexatM.Gcolony.pdf
ATTACHMENT
sportscomplex.splconditions.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .