Providing power for Common Area Services for AVANTI Housing in IIT Delhi

Amount

Supplying and laying of one number PVC insulated and PVC sheathed armoured aluminium conductor cable of size 3.5 core x 400 sqmm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.(Make of cable: Havells/Finolex/KEI/ Grandlay/ Gloster/Polycab)

Supplying and laying of one number PVC insulated and PVC sheathed XLPE armoured aluminium power cable of 1.1 KV grade of 3.5 X 400 sq. mm size on wall/ surface/ HDPE pipe as required. (Make of cable: Havells/Finolex/ KEI/Grandlay/ Gloster/Polycab)

Supplying and laying of one number PVC insulated and PVC sheathed armoured aluminium conductor cable of size 3.5 core x 300 sqmm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.(Make of cable: Havells/Finolex /KEI/Grandlay/ Gloster/Polycab)

Supplying and laying of one number PVC insulated and PVC sheathed XLPE armoured aluminium power cable of 1.1 KV grade of 3.5 X 300 sq. mm size on wall/ surface/ HDPE pipe as required. (Make of cable: Havells/ Finolex/KEI /Grandlay/ Gloster/Polycab)

Supplying and laying of one number PVC insulated and PVC sheathed armoured aluminium conductor cable of size 3.5 core x 240 sqmm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.(Make of cable: Havells/Finolex/KEI/Grandlay/ Gloster/Polycab)

Supplying and laying of one number PVC insulated and PVC sheathed XLPE armoured aluminium power cable of 1.1 KV grade of 3.5 X 240 sq. mm size on wall/ surface/ HDPE pipe as required. (Make of cable: Havells/Finolex /KEI /Grandlay/ Gloster/ Polycab)

Supply and laying 180 mm dia HDPE pipe with all accessories inside the road including making the hole with boki, dressing/ramming the trench etc. as required. (direct cutting of road is not permitted) (ISI Mark)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 3½ X 400 sq. mm (82mm) size of PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 3½ X 240 sq. mm (70mm) size of PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 3½ X 240 sq. mm (62mm) size of PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required.

Providing, fabricating and fixing M.S. iron frame fabricated with M.S. angle of size 50mm x 50mm x 6mm for resting the outdoor panel on ground with 1:3:6 concrete foundation including painting the framework etc. complete as required.

Fabrication, supply, installation, testing and commissionig of outdoor type(double door panel) electrical control distribution box of cubicle construction, size 750mm x 700mm x 450 mm, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalized with hinged lockable doors, dust and vermin proof, powder coated of approved shade after seven tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, 630A TPN Aluminium bus bar, having switchgears and assoceries, mountings and internal wiring, earth terminals and numbering, bolted type stud terminal in cable alley, etc. complete in all respect with following incoming and outgoings, suitable for operation on 415V, 3 Phase, 50 Hz AC supply with enclosure protection class IP 65 as required:- (i) Incoming 400A, 50kA, 4P MCCB, Ics 100% of Icu ratting. (ii) 1 no. of Outgoing 400A, 50kA, 4P MCCB, Ics 100% of Icu ratting. (iii) 1 no. Outgoing 250A, 36kA, 4P, MCCB. (iv) R,Y,B indicating LED lamps. (v) All outgoing terminals shall be FMC/DMC type 4 way bolted type. (vi) Suitable number of punch holes for cable entry only from bottom side of the panel. (Make of MCCB: L&T/ Legrand/C&S/ Schenider)

Making RCC foundation for resting the outdppr type panel of size750mm (length)x300mm (width) x600 (depth) mm with 1:2:4 (1cement, 2coarse, 4stone aggregate) complete with 8mm dia MS bar for reinforcement along with centering & shuttering ,3/4 no. suitable dia G.I coated bolt with double nuts, 65mm dia 45cm length, grouding the MS stand in the concrete, space for inlet and outlet cable, with excavating the soil & refilling, ramming, curring etc complete as required.

Budhiraja Enterprises

vinay electric works

SUPER MOTOR WINDING & REFRIGERATION WORK