REPAIR / MAINT TO VARIOUS E/M INSTALLATIONS INCLUDING VARIOUS MISC B/R AND ALLIED E/M WORKS IN AOR OF AGE E/M UNDER GE NASIK ROAD.

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge.

All as per item No. 1.00 above but depth more than 1.5 Mtr and upto 2 mtr.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.

Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engineer - in - Charge.

M&L for in replacement of glow sign board for fixing at MES installations Pump house fabricated out of one side polycarbonate unbreakable sheet LG vinyl cutting duly framed with 18 SWG GI sheet and angle iron frame (17.5 feet x 2.5 feet x 0.5 feet and necessary support at 6 feet) made up of 25 mm x 25mm (Square hollow pipe) errected at a height of 9 mtr (with iron Angle 50mm x 50mm x 5 mm and supproting angle at 1.5 feet of size 50mm x50mm x 5 mm) imbeded in PCC 1:2:4 type B1. The sign board to be written in bold letters of standard size as per sample approved by Engineer in Charge, duly fitted with and including 6 x 10 watt LED invertor tube light fittings with prewired and connected to the street light feeder through one three core PVC insulated copper conductor cable 1.5 sqmm drawn through MS conduit of 20mm dia to avoid mechanical damage on ground and raising on sign board or street light pole or Bldg for MES INSTALLATIONS complete all as specified and directed.

Supply and fixing of angle iron post for chain link fencing, cross arms. Bracings, support channel, backpate hooks etc fabricated from structural steel, sections (MS Channel) of required size and shape including nuts, bolts,washers, welding, bending, cutting cold or hot, drilling holes for inserting bolts as indicated and directed including painting with one coat of red oxide primer and two coats of silver aluminium paint complete all as specified and directed by Engr-in-Charge.

Supply only in chain link fencing MS galvanised, any size or type complete all as specifed and directed.

Fixing only chain link fencing including line wires any mesh size and type of standard rails straining bolts etc including provision of binding wire complete all as specified and directed.

Supply and fixing in replacement of LED Gate light of capacity 20 watt for installations indirect light with IP 65 protection, resistant to impact and corrosion glare free and better uniformity of cat ref LHFOGAE1T11F015 of Havells or equivalent complete all as specified and directed.

M&L for in replacement of pole Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI wire 4.0 mm dia, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 15 mm, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”. Note: These earthings shall be provided for poles; without provision of concrete earth pits.

M&L for in replacement Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI strip 32 x 6mm, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 40 mm incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3. of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”.

M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine for LT underground cables suitable for 0.4 Mpa working pressure complete all as specified and directed.

Supply and laying in replacement of synthetic rubber insulated mats 2.5 mm thick for voltage upto 11 KV for electrical purpose as per IS-15652-2006 suitable for electrical shock safety of size 2m x 1m complete all as specified and directed.

Supply and fixing in replacement of Air termination single pointed aluminium rod 12mm dia and 300 mm long complete all as specified and directed

Supply and fixing in replacement of Air termination single pointed copper rod 12mm dia and 300 mm long complete all as specified and directed

M&L for cleaning/removing/grass/wheels/shrubs around the mes installations and spraying grass / growth / retreat / grass burning chemicals on the area & removing the grass / wheels / shrubs out of the defense land complete all as specified directed.

Supply, install in replacement of Steel rolling shutters having thickness of laths 1.25 mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated, complete: push pull or manual type complete all as specified and dircted.

M&L for servicing, greasing and overhauling of mannual rolling shutter upto 10 Sqmtr size complete including T&P charges, grease and other any parts required at site for functional of rolling shutter complete all as specified and directed by Engineer-in Charge.

M&L for preparation of old distempered wall surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effrosecent salts and trading oil and greasy spots and applying a coat of distemper oil emulsion any tinted complete all as specified and directed.

All as per item No. 19 above but on ceiling.

M&L for preparation of old surface any type of surface wall and applying 1.5mm thick wall care putty complete all as specified and directed.

M&L for preparation of old surface any type of ceiling and applying 1.5mm thick wall care putty complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of new/existing plastered surface and applying one coat of weather coat paint (APEX) @ 0.83 Ltr/10 Sqm over one coat primer @2.20Kg/10Sqm of any colour complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for rendering 10mm thickin CM(1:4) as in backing coat, finishing even and smooth without using extra cement complete all as specifeid and directed.

M&L for coloured glazed ceramic wall tiles (300mmx200mmx7mm) in vertical surface set and jointed in neat cement slurry and pointed with white/coloured cement to match the surface complete all as directed.

Demolition of un-reinforced cement concrete in ground floors or pavings n.exc 15cm thick (below or above level) complete all as specifed and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in sub base complete all as specifed and directed.

M&L for 25mm thick PCC 1:2:4 type B-O (using 12.5mm graded aggregate) as in level course finished even and rough with out using extra cement complete all as specifed and directed.

M&L for screed bed or bedding layer 15mm thick in CM (1:6) for laying floor finished complete all as specified and directed.

M&L for 40mm thick cement concrete (1:2:4) type B-1 using 20mm graded aggregate finished even and smooth with using extra cement all as specified and directed.

M&L for glass dividing strips, 3mm thick, width of strip 38mm and inserted in position to conform to design complete all as specifed and directed by Enginner in Charge.

Dismantling floor hearth or floor tiling/kota stone including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for non ceramic flour tiles 7 to 8 mm thick (Square/rectanular) are of each life exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors skirting and similar work etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for rounding to edges of stones slabs one edge, such as in steps, cooking platform and other simlar situations.

M&L for cutting and polishing existing kota stone flooring incl making good to existing flooring all as specified and directed.

M&L for rough Shahabad stone 25mm to 30mm thick in flooring /plinth set and joined in neat cement slurry over and including 15 mm thick screed bed or beddingin CM 1:6 pointed in neat cment slurry in floors.

M&L for machine pressed precast interlocking tile any size and shape of 60 mm thickness M-35 grade confirming to IS: 15658-2006 with grey cement and pigment and vibrated with mechanical vibrator , with 30mm thick crushed sand for cushioning all as directed.

Supply and fixing in replacement of aluminium strip 25x3.15mm with saddles and fixing screws etc. for roof conductors and down down conductors complete all as specified and directed.

Supply and fixing in replacement of copper strip 20x3.15mm with saddles and fixing screws etc. for roof conductors and down down conductors complete all as specified and directed.

Demolition of Brick work or stone/boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles.

Taking down cement plaster from (valve chamber) on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc in patches complete all as specified

M&L for brick masonary with fly ash bricks, straight or curved or plain exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

M&L for Cement plaster for 15mm thick (valve Chamber) in cement plaster 1:6 complete all as specified and directed by Engr-in-charge.

M&L for Hardcore of guage n exc 63 mm of broken stone or boulders, deposited spread and levelled in layers n exc 15cm thick watered and rammed to true surface all as directed

Area clearance/levelling/excavation /digging at MES installations at any width and length by using JCB complete all as directed by Engineer-in-Charge. Note : (i) The cost of POL included in quotated rates. (ii) After Start and finsh of the work, Hrs slips shall be provided by the contrcator. (iii) The record of logbook shall be maintained duly signed by Engineer-in-charge & JE

M&L for cleaning 400000 gallons capcity by draining water from OH reservoirs not exc. 16 Mtr head/staging, and cleaning internal portion of tank (bottom and walls) by means coir / wire brush etc. and wash the internal portion of tanks by using bleaching powder @ 25 grams per 1000 Ltrs of water after removing sludge and mud etc to a distance not exc 50 mtr including one coat of synthetic enamel paint on all steel surfaces such as ladder, railing, inlet & over flow CI pipes connected sluice valves of the respective OH tanks/ground level reservoir etc writing letters with white paint (date of cleaning and capcity of tank) on black painted surface of tanks all as directed by Engineer-in-Charge.

All as per Item No.50.00 but 325000 gallons capcity

All as per Item No.50.00 but 100000 gallons capcity

All as per Item No.50.00 but 50000 gallons capcity

All as per Item No.50.00 but 100000 gallons capcity exc 16 Mtr head / staging

All as per Item No.50.00 but 75000 gallons capcity

All as per Item No.50.00 but 50000 gallons capcity

All as per Item No.50.00 but 100000 ltrs capacity

All as per Item No.50.00 but ground level reservoir of 100000 gallons cap each tanks devided in two poriton

M&L for cleaning 25000 gallons capcity by dewatering the water from settling tanks by using monoblock pump set and clean the internal surfaces of walls by means of coir / wire brush etc and after removal of sludge / mud to a distance not exc 50 mtr and clean the internal surface by clean water and two coats of synthetic enamel paint on all steel surface such as ladder, railing and CI pipes including valves all as specified and directed by Engineer-in-Charge

All as per Item No.59.00 but 36000.00 gallons capcity

All as per Item No.59.00 but 250000 gallons capcity UG sumps

All as per Item No.59.00 but 100000 gallons capcity UG sumps

(All as per Item No.59.00 but 100000 ltrs capcity UG sumps

All as per Item No.59.00 but 50000 ltrs capcity UG sumps

Excavating in post holes each n'exc 0.5 Cum and getting out in in soft/ loose soil and returning filling in and ramming earth or broken boulders mixwed with earth around in layers n;exc 25cm complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 1:2:4 type C1 using 20mm graded aggregate for coping including necessary form work and fair finishing of exposed surface of concrete all as specified and directed.

S&F Steel work in tubular trusses includimg special shaped washers etc using ERW or induction butt welded tubes confirng to IS 1161-1979 grade St-240 complete all as specified and as directed by Engr-in-Charge.

Supply and fixing rolled sections as in main and cross beams, Fe-410W purlinns etcfixed with angle cleats, or other connectig plates complete all as specified and as directed by Engr-in-Charge.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based steel corrugated sheet 0.63 mm thick of Red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed.

M&L for painting of new or previously untreated surfaces including priming with redoxide, zinc chrome alongwith two coat of synthetic enamelled paint for surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.

S&F in replacement onload change over switches with Encloser 4 pole transfer switching equipement power frame 63A.

S & F in replacement onload change over switches with Encloser 4 pole transfer switching equipement power frame 100A.

S & F in replacement onload change over switches with Encloser 4 pole transfer switching equipement power frame 125A.

S & F in replacement onload change over switches with Encloser 4 pole transfer switching equipement power frame 160A.

Supply & fixing Energy efficient LED Street/Roadway light with smart sensor luminaire, high PF, 45W, energy saving and enviromental friendly long life versatile pressure die cast aluminium housing, clear toughned glass, IP 66 protection, 240V, intelligent smart sensor based auto dimmable with dimming option of 100% to 30% of the rated wattage on sensing of movement/ occupancy, within 8 meter radies, more than 110 lumens/watt complete using 2.5 Sqmm, PVC insulated (unsheathed) three core cable, 1100V grade with aluminium conductor from junction box to light fitting all as specified and directed.

As per Item No. 75.00 but 60 W.

As per Item No. 75.00 but 90 W.

Supply and fixing of Energy efficient LED Flood light Luminaire, high PF, 80W, energy saving enviromental friendly long life versatile pressure die cast housing IP 66 protection,240V,completeusing 4 Sqmm, PVC insulated (Unsheathed) Two core armoured cable, 1100V grade with aluminium conductor (Upto 1.0 RM), complete including testing & commissioning.

As per Item No. 78.00 but 200 W.

Supply & Fix of LED 10W aviation light fitting with comprising of aluminium housing with polycarboante enclosure, IP 66 protection complete all as specified and directed.

Supply & fix of LED 10W integral decorative bollard mushroom and shaped with polymer diffuser and B22 bulb holder and 10W LED bulb with IP 65 protection complete with PCC Work 1:2:4 of adequate size for installed of bollard fitting complete all as specified and diralected by Engr-in-Charge.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 20540.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

shubham Enterprises (BID ID -3096577)

ANIKET ENGINEERING (BID ID -3105901)

Bidder Name

MAHIMA CONSTRUCTION

shubham Enterprises

ANIKET ENGINEERING