Repairing and Painting of A Type Flat buildings i.e A-1, A-2, A-3, A-4, A-5, A-6, A-7, A-8 and A-9 at KHPS,Umrongso, Assam

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Sr. Manager (E/M) i/c C&P KHPS

Name of Work: : Repairing & Painting of A Type Flat buildings i.e A-1, A-2, A-3, A-4, A-5, A-6, A-7, A-8 & A-9 at KHPS, Umrongso, Assam

Contract No: NIT NO. KHPS/C&P/2026-27/520 Dt. 15.07.2026

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures (excluding GST) To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Cleaning of ceiling voids (area between roof and false ceiling) by engaging ordinary labours and taking out the debris outside the periphery as directed by the Engineer in charge. (Necessary T&P may be arranged by the contractor) 0.000 sqm Excess(+) Full Conversion INR

2 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 108 sqm Excess(+) Full Conversion INR

3 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.2 Nominal concrete 15.2.1 Nominal concrete 1:3:6 or richer mix (including equivalent design mix) 13.32 Cum Excess(+) Full Conversion INR

4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 3:6 (1 Cement: 3 coarse sand (zone-Ill) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources) 10.8 Cum Excess(+) Full Conversion INR

5 15 mm cement plaster on the rough side of single or half brick wall of mix: 1:4 (1 cement: 4 fine sand) 432 sqm Excess(+) Full Conversion INR

6 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) 108 sqm Excess(+) Full Conversion INR

7 Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. 45 sqm Excess(+) Full Conversion INR

8 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 500x500 mm 226.8 sqm Excess(+) Full Conversion INR

9 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero-chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 11.41A.3 Glazed Vitrified tiles Mat/ Antiskid finish of size Size of Tile 600 x 600 mm 133.2 sqm Excess(+) Full Conversion INR

10 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 36 Each Excess(+) Full Conversion INR

11 Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. 36 Each Excess(+) Full Conversion INR

12 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid 36 Each Excess(+) Full Conversion INR

13 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes 288 Rm Excess(+) Full Conversion INR

14 Providing and fixing Health Faucet with flexible hose pipe 36 Each Excess(+) Full Conversion INR

15 Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 90 mm long, weighing not less than 93 gms 72 Each Excess(+) Full Conversion INR

16 Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms 36 Each Excess(+) Full Conversion INR

17 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms 36 Each Excess(+) Full Conversion INR

18 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: 100 mm diameter 36 Each Excess(+) Full Conversion INR

19 Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms. 36 Each Excess(+) Full Conversion INR

20 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms 36 Each Excess(+) Full Conversion INR

21 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. 36 Each Excess(+) Full Conversion INR

22 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 450x 300 mm with single 15 mm C.P. brass pillar tap 36 Each Excess(+) Full Conversion INR

23 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board17.10.2.3 470x420 mm bowl depth 178 mm 36 Each Excess(+) Full Conversion INR

24 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: Rectangular shape 453x357 mm 36 Each Excess(+) Full Conversion INR

25 Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately)9.6.1 12 mm thick plain grade -1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT- I, IS : 3087 marked, bonded with BWP type synthetic resin adhesive as per IS : 848 50.6 sqm Excess(+) Full Conversion INR

26 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 35 Each Excess(+) Full Conversion INR

27 Providing and fixing plain multipurpose cement board (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). 6 mm thick Cement fiber board, Type-B, Category-Ill as per IS: 14862: 2000 95.04 sqm Excess(+) Full Conversion INR

28 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 200x10 mm 48 Each Excess(+) Full Conversion INR

29 Providing and fixing bright finished brass handles with screws etc.complete: 125 mm 58 Each Excess(+) Full Conversion INR

30 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 12 mm mild steel U beading 148.5 sqm Excess(+) Full Conversion INR

31 Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Barge board (Upto 300 mm) 450 Rm Excess(+) Full Conversion INR

32 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 0.000 sqm Excess(+) Full Conversion INR

33 Renewal of old putty glass panes (length) 115.2 Rm Excess(+) Full Conversion INR

34 Providing galvd iron ridging of TATA SHAKTEE / SAIL including supplying and fixing necessary galvd screws/washers etc. complete as directed. (a) 0.45 mm thick (ii) 230 mm lapping 131.4 Rm Excess(+) Full Conversion INR

35 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : Flexible pipe 40 mm dia 36 Each Excess(+) Full Conversion INR

36 Supplying, fitting and fixing PVC pipes of 6 Kg/cm? (Supreme/Prince) or other ISI approved including joining fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified (a) In exposed surfaces or in trenches. 110mm dia. 26 Each Excess(+) Full Conversion INR

37 Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. (a) In exposed surfaces or in trenches. (i) 63mm dia. 18 Each Excess(+) Full Conversion INR

38 Supplying, fitting and fixing 87.5 degree PVC bend of (supreme/Prince) or other ISI approved including joining fitting and fixing etc.as necessary complete at all levels Each including below G.L as directed and specified (a) In exposed surfaces or in trenches. (i) 110mm dia. 45 Each Excess(+) Full Conversion INR

39 Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as Each necessary complete at all levels including below G.L. as directed and specified (a) In exposed surfaces or in trenches. (i) 110mm dia 18 Each Excess(+) Full Conversion INR

40 Supplying fiting and fixing PVC reducer of (Supreme/Prince) or other ISI approved including joining - fitting and fixing etc. as Each necessary complete at all levels including below G.L. as directed and specified (a) In exposed surfaces or in trenches. (v) 110mm x 63 mm 18 Each Excess(+) Full Conversion INR

41 Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (v) 63mm dia. PVC cowel of ISI make 18 Each Excess(+) Full Conversion INR

42 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre 246.14 sqm Excess(+) Full Conversion INR

43 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 246.14 sqm Excess(+) Full Conversion INR

44 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work 0.199 sqm Excess(+) Full Conversion INR

45 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) 0.199 sqm Excess(+) Full Conversion INR

46 Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface 4407.09 sqm Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information