Construction of Double Storeyed Hall for TT. Court, Gymnasium and Construction of Volley Ball Court at Govt College of Education at MA Road Srinagar (Balance Work)

Amount

Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan/over areas (exceeding 30 cm and upto 1.5 m in depth,1.5 m in width as well as 10 sqm on plan ) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of surplus excavated soil within a lead of 5km from site /edge cutting or as directed by EIC. disposed earth to be leveled and neatly dressed in all kinds of soil including pumping out water caused by springs,tidal or river seepage,broken water means or drains and the like complete during execution of work.

Providing and laying of stone soling hand packed dry including all carriage and cost of material involved complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) (crushed) including all carriages and cost of material involved.

Providing and laying in position specified grade of reinforced cement concrete excluding C/o centring and shuttering finishing and reinforcement all work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone agg. 20mm nominal size) including all carriages and cost of materials involved.

Brick work with common burnt clay FPS non modular bricks of class designation 75 upto floor V level in cement mortar 1:6 (1 cement :6 coarse sand) including all carriages. And cost of material involved

Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms. using 12mm ply including all carriages.

Reinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete. Thermo Mechanically Treated bars. including all carriages .

Cement concrete flooring 1:2:4 ( 1cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. Complete. 50 thick with 20mm nominal size stone aggregate(Crushed) including all carriages complete

15mm Cement plaster 1 : 3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including all carriages.

Dry random rubble masonry with hard stone in foundation and plinth using quarry stone with bond stone including all carriages of material involved

Providing and fixing 18"X18"size CI manhole cover incl. CI frame heavy for Septic & S. Pit.

P/F in position 12mm thick imported panellig on walls,ceiling and soffit (fungus &termite proof) including cost of necessary adhesive & cost of nails etc.complete job. incl preparing the surface for final finish with touch wood polish on the sealer surface with spray gun for final finish all complete incl. cost of nails / screws including frame work with Budloo wooden scants and cost of nails complete including all carriages.

Providing and fixing aluminium work for doors/ windows with extruded built up standard tubular sections/appropriate Z. sections( 42.30 X47.20 x2.00mm) and other sections of approved make conforming to IS : 733 and IS : 1285, Milky white colour coated alumunium Sections Jindal make fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions, at top, bottom and sides with required EPRM rubber/ neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

Providing wood work in frames of false ceiling , Partitions etc. Sawn and fixed in poisition in budloo wood including all carriages.

15 mm Cement plaster on the rough side of single or half brick wall of mix: 1:4(1 cement: 4 coarse sand) including all carriages complete.

Preparing wooden surfaces by applying knifing grey paste filler of approved brand and manufacture.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work including all carriages complete.

Finishing walls with acrylic smooth exterior paint of required shade on New work(two or more coats applied @1.67 l/10 sqm over and including base Coat of water proofing cement paint applied @2.20 kg/10sqm including all carriages.

Providing and fixing 3 layer PP-R (poly propylene random copolymer )pipes SDR 7.4 UV stabilised and anti microbial fusion welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded poly proplyene random fittigs I/C fixing the pipe with clamps at 1 m spacing .This includes cost of cutting chases and making good the same including testing of joints ,drilling holes in walls slabs complete as per direction of Engineer in charge

PN-16pipe 25mm OD

PN-16pipe 32 mm OD

PN-16pipe40 mm OD

Providing and fixing of Glass Fiber reinforced PPR (Polypropylene Random- Copolymer) Fittings of approved quality with solvent weld socket joints (female Elbow fittings brass thread) such as sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps, Transition Bushing, unions etc.

40mm Tee

40mm Elbow

32mm union

32mm Tee

32mm x 1/2THREAD M.Elbow

32mm x 1/2 THREAD F.Elbow

25mm Elbow

25mm x 1/2 Tee

25mm x 32 ADAPTER M.T.A

25MM X 1/2 F.T.A

25mm Tee

25mm Union

25mm Elbow

25mm x 1/2 F.T Adapter

25mm x 1/2 M.T Adapter

25mm x 1/2 M.T Elbow

25mm x 1/2 M.T TEE

32mm Pipe Elbow

32mm Pipe Tee

32mm x 25mm Tee

32mm x 25mm Reducer

32mm x 1/2 F.T Tee

32mm x 1/2Elbow

25mm Endclap

32mm Endlap

25mm overlap

32mm X 1/2 F.tT Elbow

25mm Cross Over

Providing and fixing of PVC pipe fittings of Prince/Phenolex or equivalent make of following size to soil/waste/ventellating pipes as directed by the site Engineer including all carriages.

100mm dia Door Tee

100mm dia Plain Bend

100mm dia Collar.

100mm dia P-Trap

100mm dia Plain Tee

100mm dia Y- Tee

100mm PVC Prince Cliff

100mm PVC Cowl cap

100mm Floor Trap

100mm 4-way Floor Trap

100mm 45 Deg Bend

100x75mm Reducer

75mm dia Plain Bend

75mm PVC Cowl cap

100x160mm P-Tee

100x160mm Door-Tee

160mm Door Bend

160mm Cliff

100x160mm Reducer

50mm Elbow

Making R.C.C holes 450 x 450mm size

Providing and fixing of PVC soil/waste/ventellating pipes of Prince/Phenolex or equivalent make(Type-B) of following size as directed by the site Engineer including all carriages.

100 mm dia pipes

75 mm dia pipes

50 mm dia pipes

Providing and fixing of 25mm Dia Size ball Valves/ CV fully way valve make of cost brass incl. CI well.

Providing and fixing of 40mm Dia Size ball Valves/ CV fully way valve make of cost brass incl. CI well.

Providing and fixing of 32mm Dia Size ball Valves/ CV fully way valve make of cost brass incl. CI well.

Providing and fixing water closet squatting pan ( Indiantype W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (of approved make) with manually controlled device (handle lever) conforming to IS:7231, with all fittings C.I/M.S. brackets, 32mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required white vitereous china W.C. pan of size 580 mm including carriages(Hindustan or equivalent)

Providing and fixing white vitreous china pedestal typewater closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixing, complete including cutting and making good the walls and floors wherever requied W.C. pan with ISI marked white plastic solid seat and lid (Hindustan or equivalent)

Providing and fixing of 32mm dia C.P long bend for WCs.

Construction of Brick masonry plate form for WC's using 2nd class bricks in 1:6 mix incl carriage of all materials involved.

Providing and fixing wash basin with pedastal (Jaguar/Hindware/Cera/Essal or equivalent) and making good the walls wherever required white vitrous china washbasin size 630*450 including all carriages

P/F White viterous china Large Urinal 590mm x 375mm x 390mm of approved quality with partition as per product detail with Flushing system as per product detail with C I hangers,Bottle trap,waste coupling incl:cutting and making good the walls and floors wherever required of standard make or equivalent including all carriages .

Providing and fixing of CP fixtures of Jaguar /Hindware /Cera / Essel/Parko or equivalent make including jointing testing and making good to surface as directed by the site Engineer including all carriages.

C P Basin Mixer

C P Short body type BIB COCK

C P ANGLE VALVE

C Ppillar cock

C P GRATING with anti cockroach trap below the grating hinge type

C Pwaste coupling

PVC WASTE PIPE

PVC CONNECTION 24" long

C P SOAP CASE

Providing and fixing of 50 ltr water heater gyser (Venus/Recold/Jaguar or equivalent make including nuts and bolts and necessary fittings including all carriages complete job.

Providing and fixing in positon 1 HP water motar of standard quality (Crompton/KIRLOSKAR/Havells or equivalent make including necessary fittings as directed by the site engineer including all carriages complete.

Providing and placing on terrrace (at all floor levels) polyethene water storage tank ISI:12701 (triple layer)marked indicating the BIS License No with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes with fittings but without base support for tank(Sintex,Electroplat,Star,Lotus or equivalent having valid ISI license) including all carriages.

Constructing brick masonry manholes of different sizes in cement mortar1:4 ( 1 cement : 4 coarse sand) , foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design including CI frame with cover complete job including all carriages and costs.

Supply and installation of satin finish stainless steel AISI 304 stainless steel master Pillar having 150mm dia tube for handrail (1.5mm gauge) , erected with chemical grout to be fixed on the top of slab/skirting (Spigot Fixed) complete with all necessary bends and terminations complete, with cover plate, fixings, end terminations, custom bends, as manufactured by Dline or approved equivalent & complete as per architectural drawings complete job.

Supply and installation of satin finish stainless steel AISI 304 stainless steel handrail and balustrade system having 38mm dia tube handrail (1.5mm gauge) weight 2.82 kg, erected with chemical grout to be fixed on the top of slab/skirting (Spigot Fixed) at max c/c distance of 600mm complete with all necessary bends and terminations complete, with cover plate, fixings, end terminations, custom bends, as manufactured by Dline or approved equivalent & complete as per architectural drawings complete job.

Providing and fixing of 16 guage PDI sheet roofing gutter ( Parnal) includingcolour coated Sheet fixed with washers and nails etc incl cost of all materials but excl. cost of supporting structure.

Providing and fixing of 75mm flexible Heavy duty pipe for gutter ( Parnal) including Scaffolding and stagging and to be fixed with washers and nails etc incl cost of all materials but excl. cost of supporting structure.

Providing and fixing of 40mm thick PUF sandwiched pannels for main walls with the outer and inner skin of puff pannel made UP OF 0.50mm thick GI sheet duly painted and finished and made with 60mm thick layer of rigid CFC free close cell polyurethane foam (density 40 kg ± 2 kg per Sqm) core insulation in between. complete as per particular specification attached and as per direction of Engineer-in-charge.

Providing and fixing of 60mm thick PUF sandwiched pannels for main walls with the outer and inner skin of puff pannel made 0.50mm thick GI sheet duly painted and finished and made with 60mm thick layer of rigid CFC free close cell polyurethane foam (density 40 kg ± 2 kg per Sqm) core insulation in between. The main wall pannels will be provided with tongue and groove joint cam locking system for inter locking and MS base channel of size 30x82x1.25mm thick for main wall bottom etc complete as per particular specification attached and as per direction of Engineer-in-charge.

Providing and fixing of Hetrogeneous Vinyl flooring (graboo or taraflex or Tara kett (Omnisports reference) or Equivalent compling with EN-14904 standard requirements approved by International requirements and by International sports Association FIBA/FIVB/ITF/BWF ( Iso 9001-2015 certified )recommended for National and International Indoor sports surfaces optium flor comfort and joint protection flooring (6.5-7.1mm ) comes in rolls. All visible joints on flooring will be sealed with specially made welding cord at 300 degree hot temperature to make the floor seamless and super safe and marking the courts with suitable paint as per drawing and design or as desired complete in all respects including all leads lifts carriages al adhesives . the colour design and pattern of the vinyl flooring shall be decided by the Engineer -In - Incharge in consultation with Experts.m and adhesive etc complete

Providing and applying white cement based putty / plaster of paris of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. including cost & carriage of all materials complete.

Providing and fixing Ist qualityCeramic glazed wall tiles confirming to IS : 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in all colour shades and of any size as approved by Engineer in charge in walls, skirting ,risers of steps and dados over 12 mm thick cement Mortar 1:3(1 cement:3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade (size of tile as specified by the site Engineer) including all carriages complete (Tile size 450X 300mm )

Providing and fixing ceramic glazed tiles 300*300 mm(thickmness to be specified by the manufacturers) of 1st quality conforming to IS:13755 of NITCO,ORIENT,SOMANY,KAJARIA,or equivalent make in all colours,such as White,Ivory,Grey,Fume red,Brown sizelaid on 20 mm thick bed of Cement Mortar 1:4 (1 cement:4 coarse sand) and jointed with white cement and matching pigment etc complete including all carriages.

Wall painting with plastic emulsion paint including one coat of water thinnable cement primer of approved brand and manifacture to give an even shade.Two or more coats on new work including all carriages complete

Providing and fixing gang saw cut mirror polished (premoulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels Granite of any colour and shade (Area of slab upto or over 0.5 sqm) 18 mm-20 mm thick including all carriages complete.

Providing double edge moulding to 18 mm thick granite stone counters,vanities etc including machine polishing to edge to give high gloss finish etc.complete as per design as approved by Engineer-in-Charge (Granite work)

Providing and fixing Aluminium Composite sheet cladding (exterior grade) in vertical / horizontal surface using 4mm thick sheet. The sheet shall be bent to shaped profiles as required including Perimeter Extrusion base frame extruded stifferners 2.5 to 3mm, SS expansion fasteners and silicone sealant (Dow Corning 789),all back up arrangements required for installation as per approved Architectural Elevation drawings, complete in all respects. (Sheet of Alstone, Alucobond / Reynobond / Alpolic / Gurind make or equivalent for specified areas (including cost of all material, leads, lifts and carriages etc upto site of work complete)(Finished measurements to be paid)

Providing and fixing of 32mm thick rubber interlock mat flooring including a layer of 2mm thick foam and adhesive etc complete (confirming to national /international standards of sports)

Supply and installation of sauna steam bath system (Jaquar make ) at appropriate spots as per directions of engineer-in-chage.

Supply and installation of volley ball post set of Standard quality and make of heavy duty 75mm round steel pipe with telescopic system for height Adjustment provided with wheel pulley lelers to adjust height on uneven surfaces including all carriages leads lifts complete joib

Providing and fixing factory made UPVC white colour door frame mand shutter (openable shutter Type) comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge 2 WITH Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.complete including cost of 5mm thick toughened glass and silicon sealent

Structural steel work welded in built up sections , trusses and framed work including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer all complete including all carriages leads lifts etc.

Supply and installation of volley ball Refree stand near net posts of Standard quality and make of heavy duty as per international / national standards including all carriages leads lifts complete joib

Supply and installation of Automatic electronic volley ball score board set of Standard quality and make of heavy duty as per international / national standards including all carriages leads lifts complete joib

Carriage of material

Sand + aggregate avg lead 20km

Bricks avg lead 20kms

M/S NASEER AHMAD BHAT

Matta Construction Company

TRY US CONTRACTORS AND BUILDERS